MESO-Rx Sponsor AASraw: GMP-Certified Steroid and Peptide API Manufacturer

[dcfreak]

Was there moisturer or something?
Hitting target without testing raws is the dream.

Im not sure what is showing in that Pic if thats what you mean. No, no moisture. Brew came out crystal clear. I assumed 96% and did 5% overdose. Guess I got pretty lucky.

The batch from the following set of raws I did test has a very faint yellow tint in the vial

 

[The-Squat]

If it's not MCT it is BB the issue so doesnt really change much both are not compatible with PS

I use to use the 150ml tops to control it better, they were thinner as well back then.

Now they are thicker but only 500ml is .22um, I pore about 150ml to 200ml at a time, does fine even with EO.

How warm it is and the psi are the 2 key things to watch for. Blown filters and cracked tops are a real thing, just have to learn over time it's limits.

Lesson learned many years ago, those plastic bottoms are worthless. They are weaker than the tops.

 

[dcfreak]

Do these tests confirm validity of material or just overall weight within sample?

I have a hard time understanding why somebody would get a lab on finished product and not on the raw. Don't you want to confirm what it is first?

I had multiple batches of raws so I did a 200ml test run of batch one and just tested the oil. At the same time I sent raws in from batch 2 before I brewed it.

 

[Photon]

Im not sure what is showing in that Pic if thats what you mean. No, no moisture. Brew came out crystal clear. I assumed 96% and did 5% overdose. Guess I got pretty lucky.

The batch from the following set of raws I did test has a very faint yellow tint in the vial

The comments wrote cloudy so I assumed it's moisture. Did it filter fine?

 

[dcfreak]

The comments wrote cloudy so I assumed it's moisture. Did it filter fine?

Yeah it filtered fine. Not sure why it says cloudy all the vials here are clear and it was clear when it was sent

 

[Sampei]

The comments wrote cloudy so I assumed it's moisture. Did it filter fine?

Because it crashed during travel I guess

 

[Sampei]

The comments wrote cloudy so I assumed it's moisture. Did it filter fine?

I use to use the 150ml tops to control it better, they were thinner as well back then.

Now they are thicker but only 500ml is .22um, I pore about 150ml to 200ml at a time, does fine even with EO.

How warm it is and the psi are the 2 key things to watch for. Blown filters and cracked tops are a real thing, just have to learn over time it's limits.

Lesson learned many years ago, those plastic bottoms are worthless. They are weaker than the tops.

We were talking of something different not the cracking of the plastic but the plastic leeching into the oil. You can't see that, you need to test for it and it is not even easy to do.

 

[FatDan]

From the Jan 26 batch

 

[AlexDavis43]

We were talking of something different not the cracking of the plastic but the plastic leeching into the oil. You can't see that, you need to test for it and it is not even easy to do.

ok you were talking about the GCMS showing plastics in a finished oil

cuz the only thing crashed gear does is on HPLC where is fucks up concentration measurement

(yes theory but no evidence for GCMS so far) (not a good theory)

 

[dcfreak]

Jan 22 ship date

 

[Duke309]

Has anyone gotten test cyp that won't filter and ordered in january? Wondering if they are still shipping out the garbage with good batches.

 

[The-Squat]

Has anyone gotten test cyp that won't filter and ordered in january? Wondering if they are still shipping out the garbage with good batches.

This is my concern, my rep knew there was issues and acted very professional with me the whole way until I told her it won't filter well, flipped a switch on me saying we have to investigate because there is no other reports about this.

@AASraw why treat me this way when I have been so helpful the whole time?

It's not like I am asking for you to replace the 2kg, but just out of principle some sort of compensation should have been offered rather than an outright lie. It is extremely inconvenient to filter this stuff. The Test Cyp that is that I and many received.

The whole thing with me was to finally developed trust in your company, all it took was the action from the rep to lose that trust and my business.

I have been doing this for over 15 year on a much larger scale then most in this thread, I have many more suppliers, none lie to me and treat me this way, they and I work together.

I know you won't responded or probably care one bit, but we will no longer coraperte any further.

What you don't realize is I am the biggest guy on a board you paid to have a banner on that went away in June, just a different name I used there. After all them years I finally gave you a chance to supply me and this was the result of it.

 

[Photon]

Has anyone gotten test cyp that won't filter and ordered in january? Wondering if they are still shipping out the garbage with good batches.

Quite a few now

 

[The-Squat]

Quite a few now

I think the hard to filter was an attempt to fix the non dissolve.

 

[Photon]

I think the hard to filter was an attempt to fix the non dissolve.

If you have a pump you can try to filter it all out..
This is a 10mm filter, it should be able hold alot more than membrane filters.

I'm not sure if this model's filter is replaceable but it usually looks like this and can hold alot of junk

https://www.jegs.com/i/JEGS/555/15175/10002/-1

At this point i'm assuming you need to filter out 1kg*5%=50g, which will take 250 100mm membrane filters..

 

[The-Squat]

If you have a pump you can try to filter it all out..
This is a 10mm filter, it should be able hold alot more than membrane filters.

I'm not sure if this model's filter is replaceable but it usually looks like this and can hold alot of junk
View attachment 381018

https://www.jegs.com/i/JEGS/555/15175/10002/-1

At this point i'm assuming you need to filter out 1kg*5%=50g, which will take 250 100mm membrane filters..

A buddy of mine used a prefilter to test his, same shit happened .

 

[dcfreak]

Its almost like they cut it 5% on purpose

 

[The-Squat]

Its almost like they cut it 5% on purpose

What I would like to believe is them 1st batches were insoluble so they tried to fix it and ended up with soluble that can't filter.

Hoping for the rest of you that after all that they get it right, I'll never know personally after my treatment with my issue.

 

[Photon]

Its almost like they cut it 5% on purpose

It's never been an issue because all of it has always been soluble, both pure and impure components
- evident by filters not clogging
- brew mg/ml matching purity, because if it can be filtered out, then what displacement do you use?

we always joke they add in floor sweepings..maybe they really did lol

 

[The-Squat]

Dear Meso Members,

AASraw Biochemical Technology Co., Ltd (www.aasraw.co) is a GMP and ISO 9001-certified pharmaceutical manufacturer with multiple production facilities. Since 2008, we have specialized in producing high-purity active pharmaceutical ingredients (APIs) in strict accordance with cGMP regulations and international standards, ensuring consistent premium quality.

With our own 5,000 m² state-of-the-art facility and independent R&D synthesis laboratory, we provide:
· Stable large-scale production of steroid raw powders with batch sizes from grams to tons
· Professional custom synthesis and CDMO services for special intermediates
· Guaranteed 98%+ purity with complete testing reports (COA, HPLC, HNMR, MS) for every batch; And random batches are regularly submitted to independent third-party laboratories for additional verification.
· Secure and discreet worldwide shipping, including reliable delivery to the USA, UK, EU (France, Germany, Netherlands, Spain, Italy, Poland, etc.), Canada, Australia, Brazil and most other countries.

Top-selling Products:
· Steroid Raw Powder: Testosterone, Trenbolone, Nandrolone, · Boldenone, Masteron, Primo, Dianabol, Anadrol series
· Peptides Raw Powder & Lyophilized Vials: BPC-157, TB-500, Melanotan-II, PT-141, HGH etc
· PCT Powder: Tamoxifen, Clomid, Exemestane, Anastrozole
· Sexual Enhancement Powder: Tadalafil, Vardenafil hcl, Dapoxetine hcl
· Fat Loss Hormones: Lorcaserin hydrochloride,Rimonabant hydrochloride
· Other APIs & Novel Compounds: slu-pp-332, JXL069, Zuranolone, Brexanolone......

We are committed to being your most reliable long-term API partner with consistent quality, competitive pricing, and professional service.

For catalog, quotes, or custom synthesis inquiries, please feel free to contact:
Email: king@aasraw.co
Website: www.aasraw.co

Looking forward to serving the community.

All at this point to be proven to be very false, as my other suppliers don't have the issues you do making products.