MESO-Rx
Anabolic Steroids
MESO-Rx Sponsor Genuine Steroid Powder Manufacturer-AASraw
- Thread starter AASraw
- Start date
How do bodybuilders remove gynecomastia?
As a steroid powder manufacturer only, we can only supply high quality products below, here are the simple tips for you:
1. Stop the Juice - pause the gear to let your hormones settle
2. Use SERMs like tamoxifen (Nolvadex) to block estrogen and shrink chest tissue.
3. For prevention, use aromatase inhibitors (AIs) like Anastrozole (Arimidex) or Letrozole during cycles can keep estrogen in check
4. Run our Exemestane alongside your cycle to crush estrogen buildup
As a steroid powder manufacturer only, we can only supply high quality products below, here are the simple tips for you:
1. Stop the Juice - pause the gear to let your hormones settle
2. Use SERMs like tamoxifen (Nolvadex) to block estrogen and shrink chest tissue.
3. For prevention, use aromatase inhibitors (AIs) like Anastrozole (Arimidex) or Letrozole during cycles can keep estrogen in check
4. Run our Exemestane alongside your cycle to crush estrogen buildup
Factor in powder displacement and add your oils to your beaker. Underestimate total volume a bit and then just add oil (a little bit) to your beaker as you heat.
Remember oil will expand and then cool down a bit (shrink) but this should get you w/ in 3-4 mgs of your goal.
What Is Steroid Half-Life — And Why It Matters
Steroid half-life is how long it takes for half the drug to be cleared from your body. It determines dosing frequency and how long effects last.
Why Should You Care About Steroid Half-Life?
In bodybuilding, understanding half-life is essential because it affects:
Injection frequency (shorter half-life = more frequent administration)
Hormone stability (longer half-life = steadier levels)
Stack planning (matching compounds based on their release timing)
Detection time in drug tests
Knowing the half-life helps users predict peak levels, duration of action, and potential build-up over time.
Half-Life of Common Testosterone Esters
Testosterone Enanthate: ~4.5–7 days
Testosterone Cypionate: ~8–12 days
Testosterone Propionate: ~0.8–1.5 days
Testosterone Phenylpropionate: ~2–4 days
Testosterone Decanoate: ~12–15 days
Testosterone Isocaproate: ~7–9 days
Note: These values can vary based on individual metabolism and delivery method in clinical studies. All AI contents. Thank you.
Steroid half-life is how long it takes for half the drug to be cleared from your body. It determines dosing frequency and how long effects last.
Why Should You Care About Steroid Half-Life?
In bodybuilding, understanding half-life is essential because it affects:
Injection frequency (shorter half-life = more frequent administration)
Hormone stability (longer half-life = steadier levels)
Stack planning (matching compounds based on their release timing)
Detection time in drug tests
Knowing the half-life helps users predict peak levels, duration of action, and potential build-up over time.
Half-Life of Common Testosterone Esters
Testosterone Enanthate: ~4.5–7 days
Testosterone Cypionate: ~8–12 days
Testosterone Propionate: ~0.8–1.5 days
Testosterone Phenylpropionate: ~2–4 days
Testosterone Decanoate: ~12–15 days
Testosterone Isocaproate: ~7–9 days
Note: These values can vary based on individual metabolism and delivery method in clinical studies. All AI contents. Thank you.
Last edited:
whoremoan1
Member
whats the verdict on this source? are they g2g or not?
many mixed reviews in the last 52 pages lol cant tell if half the postives are fake accs or not
many mixed reviews in the last 52 pages lol cant tell if half the postives are fake accs or not
xrayphoton13
Member
You gotta make that decision on your own. No one can tell you for sure. I used them and received my products in 13 days. I have no complaints. Other people got theirs seized at customs and they don't have a free reship policy
whoremoan1
Member
Ill will take one for the team and give it a go, i will report back in a few weeks
I got my orders as well in about 3 weeks.. just don't order something outrageous, you have a high probability of getting it If you use some sense given the current situation. You can always order again and again and again, shipping is cheap do you want to lose a whole kilogram, and make your address hot to customs, or do you want to order three or four times, and just wait a little bit longer to get it.
I’ve got an order on the way and will update when/ it arrives or fails to. You can tell I’m not a fake account by the meticulous craftsmanship I pour into every post.
For some reason I’m treating sources like Pokémon. Would be smarter to just pick one and stick with ‘em.
whoremoan1
Member
you win this forum bro
funniest shit I've ever read in the last 3 and a half weeks
Photon
Member
What are you guys ordering from this source?
Getting a pricelist from them is almost impossible, they only quote specific products.
Also, I don't think the issue is simply about whether you receive the products or not, but also about the quality of it. Alot of low quality raws currently floating around..
Getting a pricelist from them is almost impossible, they only quote specific products.
Also, I don't think the issue is simply about whether you receive the products or not, but also about the quality of it. Alot of low quality raws currently floating around..
Last edited:
Hypothetically, I ordered test prop and tadalafil raws.
I got a pricelist somehow back in March. But yeah, my initial discussions were like you describe. "What do you need, we can get it, and how much, we'll quote you a price." It's not a retail buying experience. The list I have has most of the basic injectable and oral AAS, PCT/ancillaries/AIs, a handful of weird shit (Urolithin A, J-147), and the most popular peptides sold as standard kits.
Yeah, good point - I definitely plan to get it tested.
Tren e and Deca... They're a little weird about the price list thing.. You basically tell them what you want and they give you an answer... I agree the way they handle business is quite odd but I was happy with what I got, It wasn't the best price but it wasn't terrible either, I was happy with the results... And no I didn't send it to Jano.. sorry I can't be much help
Getting any kind of raws in right now is an exception to the rule in the current situation. Subscribing to this thread to monitor success.
One thing I have noticed since I joined this forum, It doesn't matter who you pick you're always going to find people that are unhappy with something. It's no different anywhere else either, You can pick a retailer on Amazon with 4.8 stars and 7000 sales on something, And when you read through the reviews you're still going to find somebody bitching every 1 out of 10 reviews,it was junk, It showed up broken, customer service sucks,they sent me the wrong thing,etc. If you just sit here and wait for the perfect situation,you will end up wasting precious time, and probably get nowhere, especially in the current market,if you want stuff it's out there,is it 99.9% pure,is it a great price,do they reship if seized... Probably not for all three,but people are still shipping stuff successfully,most things can still be gotten ,and the prices aren't horrible, I've seen worse.. your not going to get anything if your to afraid to pull the trigger.. I missed alot of good opportunities by reading into things to much I saw on here ,and not just going with my instincts.. this place isn't perfect but they aren't that bad either, If you want it bad enough you'll pay for it. That's pretty much how things are everywhere right now, And you have a pretty good chance of getting your order delivered as long as you don't push your luck and order too much at once, then again you could not get it at all there's always that chance, but sitting around with your thumb up your ass waiting for QSC or somebody like them to come back first, is going to get you nowhere, meanwhile everybody else is going to be buying up what's left. And if you're serious you need to look beyond this forum, I found several valid places and even some new stuff being produced, there's still stuff out there, It just takes a little bit more effort than before, just because they're not on here lining up trying to sell you stuff doesn't mean that it's not out there and it's not being produced, there just isn't much happening on this page right now for some reason. I know people that are getting shipments coming in on the regular, They just have gotten smart and started ordering smaller amounts more frequently, And their surviving just fine.
Yeah, that was off putting for me. Couldn’t shake the worry that they’d say that they have the requested product, and then substitute something else in…
Thoughtful post, but I am not seeing negative reviews, I am just hearing from all my normal sources that they have no raws. I stocked up to a degree in March and am not at the point where I am in desperate need but the raw shortage is a reality, unless I am missing something.
Here is, IMO, the best assessment of the situation:
Over the past several months, the global supply of raw materials used in pharmaceutical production has faced significant disruptions. Many manufacturing plants, particularly in key regions like Asia, have either paused or reduced production. At the same time, customs controls and import regulations have become much stricter, further delaying or blocking shipments.
As a result, distributors are struggling to meet demand. Some are being vague or avoiding full transparency with their clients. Here's why:
Make no mistake: in today’s UGL market, there’s hardly anyone left with a shred of professionalism. Chinese suppliers have become masters of deception, and European distributors are following the same path. Even previously serious distributors are now adopting the same unprofessional practices—misleading their clients, whether by action or by omission.
Over the past several months, the global supply of raw materials used in pharmaceutical production has faced significant disruptions. Many manufacturing plants, particularly in key regions like Asia, have either paused or reduced production. At the same time, customs controls and import regulations have become much stricter, further delaying or blocking shipments.
As a result, distributors are struggling to meet demand. Some are being vague or avoiding full transparency with their clients. Here's why:
- They want to maintain trust and avoid panic. Admitting there is no clear timeline for product availability could push clients to look elsewhere.
- They are protecting their supplier network. Sharing too much information might allow competitors to take advantage.
- They don’t always have clear answers themselves. The situation is evolving, and many factors are out of their control.
- Selling low-quality or adulterated products, sometimes mislabeled to appear as trusted compounds.
- Taking orders without real stock, hoping they can find supply later.
- Offering weaker or diluted finished oils to maintain appearances while maximizing profit.
Make no mistake: in today’s UGL market, there’s hardly anyone left with a shred of professionalism. Chinese suppliers have become masters of deception, and European distributors are following the same path. Even previously serious distributors are now adopting the same unprofessional practices—misleading their clients, whether by action or by omission.
HUGE McBIGLARGE
Member
Is this AI?
Similar threads
