Winstrol crash

[FR0Z3N_B0MB3RRR]

Hi guys, i m trying brewing Winstrol at 25mg ml with BB/EO/Alcool 95%. It does solubilize in some set ups like 35 BB 25 Alcool 40 EO , or 50 BB 50 EO etc, at 100 C is perfect crystal clear and after it cools down and gotta been shaked it crashes.

Since it s meant to be pinned ED, i cant think about fix the problems with the hoven trick, 15min at 100 C, because, yes it functions off course but it s not a routine for everyone.

I tried also mixing with Isopropyl Myristate, but it s the same, crystal clear and it crashes after some times and some shakes.

i ll retry this time with 50 BB 30 Alc 20 EO but i dont think will function.

dont wanna use guaiacol, do you think is possibile without that shit?

i tried without BB, all EO, didn’t even get in solution @XKawN . Anyone can help ?

 

[GearGodess]

Hi guys, i m trying brewing Winstrol at 25mg ml with BB/EO/Alcool 95%. It does solubilize in some set ups like 35 BB 25 Alcool 40 EO , or 50 BB 50 EO etc, at 100 C is perfect crystal clear and after it cools down and gotta been shaked it crashes.

Since it s meant to be pinned ED, i cant think about fix the problems with the hoven trick, 15min at 100 C, because, yes it functions off course but it s not a routine for everyone.

I tried also mixing with Isopropyl Myristate, but it s the same, crystal clear and it crashes after some times and some shakes.

i ll retry this time with 50 BB 30 Alc 20 EO but i dont think will function.

dont wanna use guaiacol, do you think is possibile without that shit?

i tried without BB, all EO, didn’t even get in solution @XKawN . Anyone can help ?

Have you tried with distilled water into the milky suspension?

 

[FR0Z3N_B0MB3RRR]

Have you tried with distilled water into the milky suspension?

yes, its the reason of this topic ahah..

Too painly because of the difference speed of absorption between win and water..

Thanks anyway

 

[GearGodess]

yes, its the reason of this topic ahah..

Too painly because of the difference speed of absorption between win and water..

Thanks anyway

Is your powder micronized?
I've had consistently smooth and painless winny just from BB,BA,PEG and distilled water. Hence the suggestion.

 

[FR0Z3N_B0MB3RRR]

Is your powder micronized?
I've had consistently smooth and painless winny just from BB,BA,PEG and distilled water. Hence the suggestion.

yes it s micronized, ok thanks i ll try if you dont mind tell me that recipe

 

[GearGodess]

yes it s micronized, ok thanks i ll try if you dont mind tell me that recipe [emoji3590]

Sorry, I meant PS80 not PEG

Since you asked nicely... [emoji39]

Use 2% BA, 20%BB, 2% PS (polysorbate 80) then rest distilled water

Once fully melted with BB only, add BA, mix well, then add PS and mix well. Ensure no crystals forming at any point. This needs to be 100% prior to adding BA and PS.

Have your water measured out, slowly add the cooled melted mixture a little at a time and mix well then add more till all hormone is in the water. Should instantly turn milky white. If yellow, you fucked up and won't suspend properly. Start over. Lol

Higher concentrations, add BS to ensure it's painless. Roughly 1%

It's smooth enough to run through slin every time.

 

[GearGodess]

Is your powder micronized?
I've had consistently smooth and painless winny just from BB,BA,PEG and distilled water. Hence the suggestion.

The above, should say PS80 not PEG... sorry, didn't get to edit in time.

 

[FR0Z3N_B0MB3RRR]

The above, should say PS80 not PEG... sorry, didn't get to edit in time.

Yes I mean the %

 

[GearGodess]

Yes I mean the %

See post #6 [emoji4]

 

[FR0Z3N_B0MB3RRR]

See post #6 [emoji4]

Oh sorry I didn’t see that post , my bad... thanks

 

[GearGodess]

Oh sorry I didn’t see that post , my bad... thanks

No problem! Enjoy

 

[rasengan]

Sorry, I meant PS80 not PEG

Since you asked nicely... [emoji39]

Use 2% BA, 20%BB, 2% PS (polysorbate 80) then rest distilled water

Once fully melted with BB only, add BA, mix well, then add PS and mix well. Ensure no crystals forming at any point. This needs to be 100% prior to adding BA and PS.

Have your water measured out, slowly add the cooled melted mixture a little at a time and mix well then add more till all hormone is in the water. Should instantly turn milky white. If yellow, you fucked up and won't suspend properly. Start over. Lol

Higher concentrations, add BS to ensure it's painless. Roughly 1%

It's smooth enough to run through slin every time.

hello , will you help me too please . i have 2 questions
1. can i use peg 400 instead of bb ? if not then why ?
2. at what temperature you filter that hormone concentrate into sterile vial ? as too much hot will melt membrane and once its cooled it will crash in filter or in beaker before adding water

i do have like 5 litre peg 400 thats why i wanted to know if i can use it for making injectable winstrol suspension. i will highly appreciate any help sir. TIA

 

[pharmasource]

Winstrol will crash without satan water - GUA

 

[FR0Z3N_B0MB3RRR]

Better make it water based

 

[rasengan]

Better make it water based

yes i want to make water based winstrol suspension but with peg 400 instead of bb as sometimes bb droplets get settled down in vial after couple of weeks . at what temperature did you filtered hormone concentrate in sterile vial containing sterile water ?

 

[rasengan]

Winstrol will crash without satan water - GUA

what's satan water ?

 

[FR0Z3N_B0MB3RRR]

what's satan water ?

he wrote GUA, that stands for Guaiacol... a metoxy phenol.. a nasty very toxic chemical that even makes you and your house smell of burn wood for decades. Hes a potent solvent but i think its not worth the health and smell issues.

I filtered the water based Winstrol after it has cooled down

 

[FR0Z3N_B0MB3RRR]

he wrote GUA, that stands for Guaiacol... a metoxy phenol.. a nasty very toxic chemical that even makes you and your house smell of burn wood for decades. Hes a potent solvent but i think its not worth the health and smell issues.

I filtered the water based Winstrol after it has cooled down

I meant Its a potent solvent, not “hes” .. i cant edit my post

 

[monichi]

blend 25mg winstrol+100mg deca
for a final product of 30ml: 2% BA + 20% BB + MCT oil

DECA can (like tren E, testo E) decrease the melt point of a no ester hormone like winstrol, TNE,TrNE

19.9 ml MCT
00.6 ml BA
06.0 ml BB
03.5 ml RAWS
0.750gr raw winstrol [229-242 °C]
3.0gr raw deca [30-35°C]

DECA 100mg/ml 100mg x 30ml= 3g x 0.962 displacement = 2.9 ml
winstrol 25mg/ml 25mg x 30ml= 0.75g x 0.75 displacement = 0.6 ml
so 3.5ml of displacement with these two Raws.

The process
-750mg of winstrol raw and pour the warm MCT (60°C) to cover the raw (about 4 ml)
-Pour on it 6ml of B.B to disolve the raw but it's not enough because of the high melt point of winstrol.
-Stir and warm to 130°C
-Pour the rest of mct oil (19.9ml-4ml)
-At 100°C it's coming little by little to the melt point...
-Meltpoint granted to 110°C
-Let it warm to 130°C and stop the warm and let it cool down with stir activated
-At 90°C pour 2.9ml of DECA
-At 50°C pour 0.6ml of BA
-At 38°C filter !



2ml every EOD : monday - wed - friday
6ml every week for a total 150mg of winstrol + 600mg of DECA
150mg of testo C on tuesday and thursday for 300mg every week

 

[FR0Z3N_B0MB3RRR]

blend 25mg winstrol+100mg deca
for a final product of 30ml: 2% BA + 20% BB + MCT oil

DECA can (like tren E, testo E) decrease the melt point of a no ester hormone like winstrol, TNE,TrNE

19.9 ml MCT
00.6 ml BA
06.0 ml BB
03.5 ml RAWS
0.750gr raw winstrol [229-242 °C]
3.0gr raw deca [30-35°C]

DECA 100mg/ml 100mg x 30ml= 3g x 0.962 displacement = 2.9 ml
winstrol 25mg/ml 25mg x 30ml= 0.75g x 0.75 displacement = 0.6 ml
so 3.5ml of displacement with these two Raws.

The process
-750mg of winstrol raw and pour the warm MCT (60°C) to cover the raw (about 4 ml)
-Pour on it 6ml of B.B to disolve the raw but it's not enough because of the high melt point of winstrol.
-Stir and warm to 130°C
-Pour the rest of mct oil (19.9ml-4ml)
-At 100°C it's coming little by little to the melt point...
-Meltpoint granted to 110°C
-Let it warm to 130°C and stop the warm and let it cool down with stir activated
-At 90°C pour 2.9ml of DECA
-At 50°C pour 0.6ml of BA
-At 38°C filter !
View attachment 131815
View attachment 131816

2ml every EOD : monday - wed - friday
6ml every week for a total 150mg of winstrol + 600mg of DECA
150mg of testo C on tuesday and thursday for 300mg every week

Very thanks man, i ll try it for sure, i ve the same scale btw