300mg/ml test c possible with what?

[Deleted member 127229]

I'd like to make test c at 300mg ml.

I use 2/20 in mct at 260mg/ml no problem

Should I be able to make 300mg ml test c with 25bb or maybe a little EO? Or higher bb?

 

[Nilatac]

HL has or had test c at 300 mg( tested) and they don't use eo.
You can try a higher bb if you don't want to use eo. It should hold with one of those variant

 

[H&M]

Try to use 20%BB if crash add more 2% reheat and wait a few days.If still crash adjust BB until hold.

 

[Bigguy81]

Easy work brother.

1.5%BA
20%BB

Then Just take the raw by its self up to 222°F, and leave it there for 20 minutes then add your Carrier, and BB. Make sure you heat them to at least 150°F before adding them. Let it cool down to 120°F, and add your BA and filter. Just don't raise or lower the temperature too quickly in either direction. Some people just might sound silly but doing it this way I melting your raw first and doing it how I just outlined. Including the correct melting points for the correct period of time. All of this is what allows you to get away with less solvents. Especially super solvents

 

[silntrunin]

Try to use 20%BB if crash add more 2% reheat and wait a few days.If still crash adjust BB until hold.

If he does that it wont be 300mg any more.
OP, I dont see why it wouldnt hold with 2% BA and 20% BB
Make a small batch first to test.

 

[willy86]

I always make my testosterone cypionate at 300mg/ml. 2%ba 20%bb mct oil.

 

[lukiss96]

If Human labs can make it, so can you.

 

[Deleted member 127229]

I always make my testosterone cypionate at 300mg/ml. 2%ba 20%bb mct oil.

At exactly 300mg or overdosed by 5-10%?

No crashing?

 

[Deskoze38192]

I’m about to brew a small batch of cyp at 300 mg/ml this weekend to cut down on my oil a little with Test at 700mg on this current blast. Going to compensate for 96% raws but not overdose. BA 2 / BB 20 MCT
But I am thinking of trying 5% overdosed also just to see lol

I usually brew cyp at 200 mg/ml in GSO overdosed 10% with BA 1.5 / BB 18

 

[willy86]

At exactly 300mg or overdosed by 5-10%?

No crashing?

I do precise without overdosing. I've never had any problems even in the winter.

 

[Deskoze38192]

Did a micro brew today 30 ML
Test C 300 mg/ml
1.5 BA
20 BB
Compensated for 96% raws
MCT

 

[test9999]

I just made a personal use batch of test C at 250mg at 2/20. 100ml
1 bottle is crystal clear, the other has massive crystals in it.
Should I add 2ml BB, put a breather needle in it, and back to the oven at 200 for 20min?

 

[Deskoze38192]

I just made a personal use batch of test C at 250mg at 2/20. 100ml
1 bottle is crystal clear, the other has massive crystals in it.
Should I add 2ml BB, put a breather needle in it, and back to the oven at 200 for 20min?

Just curious, how long did you have it on the magnetic stirrer?

 

[test9999]

Just curious, how long did you have it on the magnetic stirrer?

20min, maybe 30

 

[Deleted member 127229]

Did a micro brew today 30 ML
Test C 300 mg/ml
1.5 BA
20 BB
Compensated for 96% raws
MCT

That is awesome, thank you so much for posting. I'll be brewing this exact batch myself now.

Let me know if it crashes on you. Please

 

[Deleted member 127229]

I do precise without overdosing. I've never had any problems even in the winter.

Nice thanks for your reply

 

[Deskoze38192]

That is awesome, thank you so much for posting. I'll be brewing this exact batch myself now.

Let me know if it crashes on you. Please

Will do
So far no crashing

Side note: For this tiny brew I used a med lab supply 50 ml Narrow mouth Graduated Erlenmeyer glass Flask ($1.85)
I spray down with bleach water, rinse with distilled water and let dry on the hot plate upside down. Then I throw it away when I’m done. Cheap and easy. The narrow neck worked fine on the magnetic stirrer. 30 ml is the max though, any more and it would be spritzing out. I hate “doing dishes” so just throwing it away when I’m done made me happy lol. Plus I like the narrow neck over the beakers I use for larger brews.
Added raws, Added BA, Added BB and stirred until the raws dissolved while heating. Added MCT and had on the magnetic stirrer for 30 minutes while maintaining heat.
Maintained heat and filtered warm.

 

[Deleted member 127229]

Will do
So far no crashing

Side note: For this tiny brew I used a med lab supply 50 ml Narrow mouth Graduated Erlenmeyer glass Flask ($1.85)
I spray down with bleach water, rinse with distilled water and let dry on the hot plate upside down. Then I throw it away when I’m done. Cheap and easy. The narrow neck worked fine on the magnetic stirrer. 30 ml is the max though, any more and it would be spritzing out. I hate “doing dishes” so just throwing it away when I’m done made me happy lol. Plus I like the narrow neck over the beakers I use for larger brews.
Added raws, Added BA, Added BB and stirred until the raws dissolved while heating. Added MCT and had on the magnetic stirrer for 30 minutes while maintaining heat.
Maintained heat and filtered warm.

I can't like your post because I'm a subscriber now. But I appreciate your reply. I've been brewing a few years now but never brewed test c over 250mg ml.

Also just a suggestion... add ba last 15mins of stirring before filtering. Since it's alcohol it evaporates some with heat. This can be minimized by adding it last 15mins of stirring before you filter.

I'm excited to try the 300mg ml brew! I'll let you know how it turns out

Thanks for sharing your process and input. I'm glad to hear it came out well.

 

[Deskoze38192]

I can't like your post because I'm a subscriber now. But I appreciate your reply. I've been brewing a few years now but never brewed test c over 250mg ml.

Also just a suggestion... add ba last 15mins of stirring before filtering. Since it's alcohol it evaporates some with heat. This can be minimized by adding it last 15mins of stirring before you filter.

I'm excited to try the 300mg ml brew! I'll let you know how it turns out

Thanks for sharing your process and input. I'm glad to hear it came out well.

Good advice
Thank you I appreciate it

 

[Nilatac]

If you want to be a source make sure that test c 300mg it would not crash when is exposed to cold(during transport). That's why I suggest up the bb ....
Gear is fine crashed after it gets heated a bit but better you don't give the end user a headache as what he wants is just to draw and inject because that's why he bought finished gear not to stay with his vial in hot water and shake and wonder if now is ok to pin.
Up the bb or offer test d as a alternative to a higher mg/ml and let test c to his classic 200mg.
Just an opinion but your call as is your business