General Pharmaceuticals - EU Domestic & International

[el_traficante]

Hello everyone,

I am leading the team responsible for General Pharmaceuticals product distribution.

Official product website

www.general-pharmaceuticals.com

The product
The manufacturer has relied on the use of ingredients from trusted and verified suppliers acquired over the years of experience, minimizing the amount of solvents and additives, avoiding known allergens, relying on standard concentrations and quality control through HPLC testing - all to achieve quality parameters, like purity, ease of application, conformity to the declared amount of active ingredient and all other properties a solid product must have.

Injectable products
MCT oil was chosen as the carrier oil for the production of injectable products to achieve low viscosity without the need for additional additives. Injectable products are presented in labelled 10ml multidose vials, packed in a sealed box.


Oral products
Oral products do not contain any allergens, such as lactose or others. Solubility of tablets is flawless and oral products are presented as tablets with breaking line, in blisters of 10, packed in sealed box.


Every product is protected by anti-counterfeiting measures.

We are in direct contact with manufacturer, so if you have any product or production related questions, please feel free to ask and we will happily relay the question and try get a satisfactory answer for you.

The manufacturer did a great job in production and our job is to bring it to you so now I will describe how we operate.

Our distribution is based in EU, we can ship international orders too.

Ordering
We are currently accepting orders in email or you can submit the order via simple form at our website. We strongly suggest using encrypted email and making use of privnote for sharing shipping or payment details.

Price list

www.lostraficantes.info

Payment
We are accepting following payment methods at the moment:
- Crypto (BTC, USDT etc…)
- Bank transfer
- Credit/Debit card

Packing and Shipping
All orders are packed discreetly and delivery service is chosen based on order size or is discussed with client if there are any special requirements. Shipping costs is 20 EUR for EU orders and 25 EUR for non-EU orders. Wholesale orders are priced individually.

Reshipping
We provide a reshipping service of full order for FREE in the rare occurrence of loss or seizure so each order has a 100% delivery guarantee.

Testing
We are always encouraging clients to perform blind testing of products so we offer full costs reimbursement in the form of store credit.

Our email

generalpharmaceuticals@proton.me

Telegram

@el_traficante
https://t.me/el_traficante

Promotion
A polite introduction can not be left without good promotion. I hope the line has already sparked your interested and we would like to make it even better. Each order gets 30% discount and shipping costs is FREE. There is also no minimum order for the promotion period so you can freely enjoy anything you might like.

 

[el_traficante]

Laboratory Analysis

 

[damian90k]

First!!!

 

[BalticSea]

Two spanish UGL introduce yourself inside few hours

 

[Anabolic Empire]

hello my friend

 

[Var1]

Too expensive for the uk market!

 

[narta]

Too expensive for the uk market!

Too expensive period.

 

[AlexDavis43]

Not a bad intro. The tits thing was a joke anyway.

 

[Den84]

Do you have a reserved price list for wholesalers? I mean for order over 100/150 items

 

[SpaceGhost]

Too expensive period.

You can find cheaper domestic products even with the promotional discount. No MOQ and free shipping makes it competitive for now, but who buys at these prices for international once that's gone?

 

[el_traficante]

Even though I think that the introductory discount of 30% on all products and free shipping is a very attractive offer, the goal of GP is by no means to compete with other UGLs on price.

After all, even here on MESO, you’ll find other large manufacturers whose retail prices are nowhere near those of small UGL shops.

There are, of course, very good reasons why this is the case.

Many people think in terms of: "The raw material can be bought for this and that amount, some glass, so the value of the product is this and that amount." However, we are talking about pharmaceutical preparations. Yes, even the price of testosterone from the pharmacy at $50 is justified, even though the production cost according to Joe's formula is just a few dollars.

I will leave out the equipment of the laboratory itself because it would not be fair to say that even a small laboratory cannot meet basic cleanliness standards. However, it is still possible to set up a relatively clean UGL on a budget.
A small laboratory can be set up for a few thousand dollars (PM me for shopping list) with minimal operating costs.

Of course, you might say that costs are none of your business and it is the problem of each company to manage them. However, I reiterate, we are talking about pharmaceutical products, and personally, I can say that I would prefer to use products from a laboratory that spends a considerable amount.

Recently, the trend of the philosophy "a test is a test" has become widespread, and price has become the most significant factor in evaluating individual products. This is quite strange considering that these are pharmaceutical preparations that people apply to their bodies.

When it comes to product quality and health risks, which I believe should be the most crucial factor—because otherwise, the equation "a test is a test" applies—there are significant differences in manufacturing, especially from a long-term perspective.

I'm not talking now about PIP or common issues related to individual allergies to certain ingredients or reactions to the active substance itself.

But have you ever found yourself with muscle or tendon pain without any apparent short-term cause?

This could be easily caused by inflammation accumulated in the body over years of using lower-quality injectable products. You might not even be aware of such micro-inflammations, but they can accumulate in the body and eventually lead to much more serious problems, as it is well-established that inflammation is one of the most significant factors in cardiovascular issues and others.

Ingredients
It is not at all uncommon for laboratories producing injectable products to use food-grade oils, as well as solvents like benzyl alcohol, benzyl benzoate, and others, which vary in quality depending on their intended use. All these substances are relatively easy to obtain and inexpensive, whereas carrier oils and other additives specifically intended for pharmaceutical (especially injectable)use, sterile and free of toxins impossible to sanitize by basic sterilization are significantly more expensive and not readily available.

The cost of ingredients is one thing, but you also need to consider the expenses involved in acquiring them. Such ingredients are not available to just anyone; often, you need to posses a company with certain credit or the capability to purchase these ingredients. Again, setting up and maintaining such a company is another cost, and the people representing the company can cost more per month than the expenses for equipping a small UGL laboratory for its entire lifespan.

Raws
Then there's the raw material itself. It is no secret that the vast majority of manufacturers face a common issue: the necessity to source raw materials from China or possibly India, and there are similarly significant (sometimes drastic) differences in quality.

I have witnessed various issues, and other manufacturers would certainly agree with me, especially when it comes to some products where there are huge, enormous differences in quality. I have seen testosterone undecanoate with a purity of 20%, boldenone undecylenate with purity ranging from 50-90%, and nandrolone decanoate at 80-90% (I’ve even seen 0%, but that had to be a scam). If you have 70% boldenone undecylenate, what makes up the remaining 30%, and what do these substances do to the body? No one knows. What does a "proper" chemist do? Overdose by 30 to ensure that the analysis appears correct and we good.

None of us in the UGL industry are pharmaceutical companies that have invested billions to obtain and maintain certifications, nor do we face bureaucratic and hygienic scrutiny. Fortunately and unfortunately, all these factors that significantly impact the price of products do not apply to UGLs. This allows us to produce products at much lower prices, but it also creates a large margin for compromising quality.

At the end of the day, it’s up to each individual to decide what they put into their body. Price is never a guarantee of quality, but it’s reasonable to ask: if someone can sell products at a fraction of the price, what’s the likelihood that they invest in their product as much?

With this post, I certainly don't intend to attack any specific laboratory or brand. It's up to each individual and their conscience what they are willing to release into the world.

 

[el_traficante]

Do you have a reserved price list for wholesalers? I mean for order over 100/150 items

Good point, I just realized that I haven't mentioned wholesale at all. Yes, of course, we also have an offer for dropshipping and wholesale partners. Please contact me by email.

 

[Var1]

Still full of shit, I read half your post and got bored, !! It still doesn’t justify your prices

 

[Den84]

I contacted the seller and got the wholesale pricing information. Communication is rapid and responses are comprehensive. The price list is in line with the prices of other manufacturers, so I'm not complaining. Some molecules are still missing from the list (parabolan, proviron, Viagra and peptides) but they will be added in the future. Now I'm waiting for some information regarding the type of shipping, then I'll probably place a test order

 

[AlexDavis43]

I contacted the seller and got the wholesale pricing information. Communication is rapid and responses are comprehensive. The price list is in line with the prices of other manufacturers, so I'm not complaining. Some molecules are still missing from the list (parabolan, proviron, Viagra and peptides) but they will be added in the future. Now I'm waiting for some information regarding the type of shipping, then I'll probably place a test order

I'm waiting for a reply but same.

 

[AlexDavis43]

But have you ever found yourself with muscle or tendon pain without any apparent short-term cause?

This could be easily caused by inflammation accumulated in the body over years of using lower-quality injectable products. You might not even be aware of such micro-inflammations, but they can accumulate in the body and eventually lead to much more serious problems, as it is well-established that inflammation is one of the most significant factors in cardiovascular issues and others.

So if anything bad happens at anytime in the future you can blame it on inflammation from theoretical impurities from gear you used years or even decades ago. Sounds like fear mongering.

Like some suggesting material from vial caps bioaccumulate and can cause problems years later. Microplastics strike again. *meh*

 

[Cipio]

Good communication with the source, order placed yesterday and tracking code received a few hours later, they seem fast.

 

[el_traficante]

Like some suggesting material from vial caps bioaccumulate and can cause problems years later. Microplastics strike again. *meh*

If by caps you mean vial stoppers then the person was indeed correct. Stoppers are made of different materials and selected based on required properties and chemical stability considering compounds it comes to contact with. (for example silicone has better sealing properties after repeated puncturing compared to others)

In case of AAS, the most common is carrier oil, benzyl alcohol and benzyl benzoate. Butyl rubber is the most commons and appropriate choice as it’s resistant to mentioned compounds and others too. It has also good mechanical properties and is suitable for multi dose vials as it is resistant to crumbling into the solution after repeated use.

Anyway, most of the ugl products I have seen are using butyl stoppers, even those who don’t exactly know what are they doing since when you ask for a stopper in China, what you usually get is butyl rubber ones, so nothing to worry about too much in this regard.

Worst what I have seen were stoppers that were extremely hard and crumbly, red color and the color itself was bleeding into the compound because the material was reacting with solvents severely. So clearly the material selection was as bad as possible in this case.

 

[nolan554]

Sibutramine is 30 or 50 tab like the rest?

 

[Cipio]

The shipment arrived today, but when I checked the authenticity on the laboratory's website, I was told that they are not original, and I am waiting for a reply.