New to brewing

Gottapintowin

New Member
I've been looking for a filter and seen this will this fit 100ml of gear through the filter ? It's a 150ml Nalgene Rapid-Flow Sterile Disposable Filter, Nylon Membrane, 0.22um
And what do I do once I used it do I just throw it out and get a new one or can I wash and reuse
 
I've been looking for a filter and seen this will this fit 100ml of gear through the filter ? It's a 150ml Nalgene Rapid-Flow Sterile Disposable Filter, Nylon Membrane, 0.22um
And what do I do once I used it do I just throw it out and get a new one or can I wash and reuse
If something says disposable, chances are it cannot be reused.
 
Seemed pretty self explanatory but thought I'd ask thanks buddy
I use one filter per brewing session, per compound. But honestly I've stopped cooking so much at once because I don't like to keep it sitting in vials for so long and those big filters are pricey. and also I can't find enough people to pawn my excess off onto lol so I just brew maybe 40mL at a time and put it through a disposable luer lock filter.
 
I use one filter per brewing session, per compound. But honestly I've stopped cooking so much at once because I don't like to keep it sitting in vials for so long and those big filters are pricey. and also I can't find enough people to pawn my excess off onto lol so I just brew maybe 40mL at a time and put it through a disposable luer lock filter.
With that filter do I haver to throw the whole thing out or is there just a filter I can change in there ?
 
So if I was to brew test tren and npp would that mean I would buy 3 seperate ones ?

* Yes, the .22um "150ml Nalgene Rapid-Flow Disposable Filter Units" are both sterile and disposable/meant for single use for one compound.... Yes, I understand someone has already chimed-in and mentioned it previously....
* Yes, you can actually & easily run/filter over 150ml through the 150ml Nalgene Rapid-Flow Sterile Disposable bottle top Filters as long as it's the same compound, etc...... I used them b-4 w/ great success.... Twas in a pinch on more than one occasion, & probably had easily 200-250ml of Test E. that needed to be filtered... I already had my own 250ml Glass Media Bottle w/ 45mm wide neck on hand + attached, so running through an additional 100ml of Test E. was no problem w/ that unit, etc....

Here are my question(s) for you?

Are you buying the "complete" Filtering unit w/ plastic media bottle inclusive too, or just the .22um bottle top filter? ALL "complete" units are sold w/ garbage plastic media bottles... Hence, once you start applying your vacuum pump pressure and suction, the plastic media bottle is guaranteed to crack, and you're screwed...Thus, you need to provide & should already own your own GLASS MEDIA BOTTLE(s)... Now, those .22um Nalgene Rapid Flow Bottle Top filters are actually sold w/ two different Neck sizes: 33mm, and/or 45mm widths.... Better know the neck size of your own glass media bottle, or you're screwed too... Yes, I've ordered the incorrect size b-4 as I had no clue years ago.... I personally only use the wider 45mm screw on neck size width via my glass media bottles as it gives more support to unit and base & avoids possible tipping over during the filtration process... Just FYI and food for thought....;)
 
* Yes, the .22um "150ml Nalgene Rapid-Flow Disposable Filter Units" are both sterile and disposable/meant for single use for one compound.... Yes, I understand someone has already chimed-in and mentioned it previously....
* Yes, you can actually & easily run/filter over 150ml through the 150ml Nalgene Rapid-Flow Sterile Disposable bottle top Filters as long as it's the same compound, etc...... I used them b-4 w/ great success.... Twas in a pinch on more than one occasion, & probably had easily 200-250ml of Test E. that needed to be filtered... I already had my own 250ml Glass Media Bottle w/ 45mm wide neck on hand + attached, so running through an additional 100ml of Test E. was no problem w/ that unit, etc....

Here are my question(s) for you?

Are you buying the "complete" Filtering unit w/ plastic media bottle inclusive too, or just the .22um bottle top filter? ALL "complete" units are sold w/ garbage plastic media bottles... Hence, once you start applying your vacuum pump pressure and suction, the plastic media bottle is guaranteed to crack, and you're screwed...Thus, you need to provide & should already own your own GLASS MEDIA BOTTLE(s)... Now, those .22um Nalgene Rapid Flow Bottle Top filters are actually sold w/ two different Neck sizes: 33mm, and/or 45mm widths.... Better know the neck size of your own glass media bottle, or you're screwed too... Yes, I've ordered the incorrect size b-4 as I had no clue years ago.... I personally only use the wider 45mm screw on neck size width via my glass media bottles as it gives more support to unit and base & avoids possible tipping over during the filtration process... Just FYI and food for thought....;)
I'm just doing 100ml of each compound for test tren and deca am j better of using those syringe filters and can you use pre sterilised viles ?
 
* Yes, the .22um "150ml Nalgene Rapid-Flow Disposable Filter Units" are both sterile and disposable/meant for single use for one compound.... Yes, I understand someone has already chimed-in and mentioned it previously....
* Yes, you can actually & easily run/filter over 150ml through the 150ml Nalgene Rapid-Flow Sterile Disposable bottle top Filters as long as it's the same compound, etc...... I used them b-4 w/ great success.... Twas in a pinch on more than one occasion, & probably had easily 200-250ml of Test E. that needed to be filtered... I already had my own 250ml Glass Media Bottle w/ 45mm wide neck on hand + attached, so running through an additional 100ml of Test E. was no problem w/ that unit, etc....

Here are my question(s) for you?

Are you buying the "complete" Filtering unit w/ plastic media bottle inclusive too, or just the .22um bottle top filter? ALL "complete" units are sold w/ garbage plastic media bottles... Hence, once you start applying your vacuum pump pressure and suction, the plastic media bottle is guaranteed to crack, and you're screwed...Thus, you need to provide & should already own your own GLASS MEDIA BOTTLE(s)... Now, those .22um Nalgene Rapid Flow Bottle Top filters are actually sold w/ two different Neck sizes: 33mm, and/or 45mm widths.... Better know the neck size of your own glass media bottle, or you're screwed too... Yes, I've ordered the incorrect size b-4 as I had no clue years ago.... I personally only use the wider 45mm screw on neck size width via my glass media bottles as it gives more support to unit and base & avoids possible tipping over during the filtration process... Just FYI and food for thought....;)
https://www.medical-and-lab-supplies.com/250ml-nalgene-nylon-membrane-complete-filter-0-45-pore-size-sterile-qty-1.html Would this be a okay filter for what I need just don't want to wait and use my hands with the syringe filters
 
Yeah
* Yes, the .22um "150ml Nalgene Rapid-Flow Disposable Filter Units" are both sterile and disposable/meant for single use for one compound.... Yes, I understand someone has already chimed-in and mentioned it previously....
* Yes, you can actually & easily run/filter over 150ml through the 150ml Nalgene Rapid-Flow Sterile Disposable bottle top Filters as long as it's the same compound, etc...... I used them b-4 w/ great success.... Twas in a pinch on more than one occasion, & probably had easily 200-250ml of Test E. that needed to be filtered... I already had my own 250ml Glass Media Bottle w/ 45mm wide neck on hand + attached, so running through an additional 100ml of Test E. was no problem w/ that unit, etc....

Here are my question(s) for you?

Are you buying the "complete" Filtering unit w/ plastic media bottle inclusive too, or just the .22um bottle top filter? ALL "complete" units are sold w/ garbage plastic media bottles... Hence, once you start applying your vacuum pump pressure and suction, the plastic media bottle is guaranteed to crack, and you're screwed...Thus, you need to provide & should already own your own GLASS MEDIA BOTTLE(s)... Now, those .22um Nalgene Rapid Flow Bottle Top filters are actually sold w/ two different Neck sizes: 33mm, and/or 45mm widths.... Better know the neck size of your own glass media bottle, or you're screwed too... Yes, I've ordered the incorrect size b-4 as I had no clue years ago.... I personally only use the wider 45mm screw on neck size width via my glass media bottles as it gives more support to unit and base & avoids possible tipping over during the filtration process... Just FYI and food for thought....;)
can you recommend me what filter and a glass bottle to buy please
 
Back
Top