New to Homebrewing - First batch

[hmart]

So, me and my buddy just finished our first batch of test prop @ 100 mg/ml following the recipes of PS Labs Founder.

We made some minor mistakes like the following:
-Used a beaker too small for mixing, it was a 100 ml almost to the top, we need something like 200 ml to mix comfortably.
-The Whatman filter kept 2 ml of the solution, now I understand why you need to keep aside 2 ml of oil to run it through [)]

So, we made 98 ml of solution and placed in 10 sterile vials. The filtering process was a pain in the ass, our hands were sore . We sterilized at the end in the stovetop for 20 minutes, is that ok?

Anyhow, now we want to test the purity but we haven't been able to find a Lab that does HPLC testing (I live in the Dominican Republic).

Options?
1. If we inject 1 cc (supposed to be 100 mg) EOD, after four or five injections what should our total testosterone be around?
2. Keep looking for a local lab to do HPLC or find an international lab.

 

[PS LABS FOUNDER]

Cool you got to use my info! - yes that is why you need 2ml of clean oil to run through the filter at the end so you get all ur test out into ur vials

at the very end you should put the filled filtered vials on a cookie sheet or pan and put them in a oven at 200 - 210 degrees for a while like 30 minutes to be sure everything is sterilized in those vials

id do every other day 1ml injects with ur test p 100

so, me and my buddy just finished our first batch of test prop @ 100 mg/ml following the recipes of ps labs founder.

We made some minor mistakes like the following:
-used a beaker too small for mixing, it was a 100 ml almost to the top, we need something like 200 ml to mix comfortably.
-the whatman filter kept 2 ml of the solution, now i understand why you need to keep aside 2 ml of oil to run it through [)]

so, we made 98 ml of solution and placed in 10 sterile vials. The filtering process was a pain in the ass, our hands were sore . We sterilized at the end in the stovetop for 20 minutes, is that ok?

Anyhow, now we want to test the purity but we haven't been able to find a lab that does hplc testing (i live in the dominican republic).

Options?
1. If we inject 1 cc (supposed to be 100 mg) eod, after four or five injections what should our total testosterone be around?
2. Keep looking for a local lab to do hplc or find an international lab.

 

[delcapone]

i too live in an area with no testing labs, so what i do to test quality is inject and watch for results. If powder would ever seem suspect I would inject aquaintences(not friends) and watch for results.

 

[hmart]

Various "test subjects" have been experiencing a lot of PIP. What is the deal with the BA and stuff? I've heard so many contradicting opinions.

I followed the exact concentrations of the recipe from PS Labs Founder.

Subject A -> Developed swelling and lots of pain in three sites of inyection. (2 x 2 cc + 1x1cc injections)
Subject B -> Developed pain in one of two sites of inyection. (2 cc per injection). No swelling.
Subject C (ME ) -> Slight pain in two injection sites (1 cc per injection). No swelling.

Any clues?

 

[Kimo1019]

I haven't messed with test prop before but I hear it takes some getting used to with the pip and all.

 

[MANWHORE]

Cool you got to use my info! - yes that is why you need 2ml of clean oil to run through the filter at the end so you get all ur test out into ur vials
[/size]

I just used air to push the rest out.

If my oil didn't have gear in it,
It wasn't going through my filter...

You think I got time to play
Around with plain oil?

Baking takes to long...
Boil it on stove, and the BA will
Take care of any spores going through
The .45 within 7 days.. Probably less, but I used
To let mine sit 5 to 7

 

[Kamala]

Various "test subjects" have been experiencing a lot of PIP. What is the deal with the BA and stuff? I've heard so many contradicting opinions.

I followed the exact concentrations of the recipe from PS Labs Founder.

Subject A -> Developed swelling and lots of pain in three sites of inyection. (2 x 2 cc + 1x1cc injections)
Subject B -> Developed pain in one of two sites of inyection. (2 cc per injection). No swelling.
Subject C (ME ) -> Slight pain in two injection sites (1 cc per injection). No swelling.

Any clues?

2 CC is a lot of prop....... How much BA are you using?



Heat sterilization is somewhat of an open debate. There are some that feel the heat required to properly sterilize will degrade the finished product.
I've seen charts regarding how long it takes to sterilize at different temperatures, at the lower ranges it takes a whole lot longer...... I'll see if I can find them. Basically what 400f would do in 1/2 hour takes a day @ 200?

 

[PS LABS FOUNDER]

Yes i would not heat up the finished products for more then 30 minutes ...and i sure would not go over 210 degrees ...400f would degrade the products for sure!!

Id count on the ba and bb keeping the oil sterile and if you made it clean and tidy then the ba and bb is all you should need after using the filters

if you are injecting 2cc prop then its always going to hurt a little ...2cc is a lot all in 1 spot

i use insulin syringes and do in deltiods and in triceps 1cc at a time

2 cc is a lot of prop....... How much ba are you using?



Heat sterilization is somewhat of an open debate. There are some that feel the heat required to properly sterilize will degrade the finished product.
I've seen charts regarding how long it takes to sterilize at different temperatures, at the lower ranges it takes a whole lot longer...... I'll see if i can find them. Basically what 400f would do in 1/2 hour takes a day @ 200?

 

[Kamala]

Yes i would not heat up the finished products for more then 30 minutes ...and i sure would not go over 210 degrees ...400f would degrade the products for sure!!

Id count on the ba and bb keeping the oil sterile and if you made it clean and tidy then the ba and bb is all you should need after using the filters

if you are injecting 2cc prop then its always going to hurt a little ...2cc is a lot all in 1 spot

i use insulin syringes and do in deltiods and in triceps 1cc at a time

I know 2cc of test E is a little tender in a delt sometimes....... Prop? Ouch fuck.

I remember a thread on another board where a super mod was complaining about PIP...... It turned out the guy was shooting like 3 or 4 cc of sustanon at a time lol, didn't realize that it had prop in it..... And yet he was a super mod.

 

[PS LABS FOUNDER]

I know 2cc of test E is a little tender in a delt sometimes....... Prop? Ouch fuck.

I remember a thread on another board where a super mod was complaining about PIP...... It turned out the guy was shooting like 3 or 4 cc of sustanon at a time lol, didn't realize that it had prop in it..... And yet he was a super mod.

[)] ...IF THE GUY DIDNT KNOW SUSTANON HAD PROP IN IT...HE SURE SHOULDNT HAVE BEEN DOING 3CC AT A TIME!!!

 

[hmart]

2 CC is a lot of prop....... How much BA are you using?

I'm using 5% of BA and 15% of BB, just as the recipe of PS Labs Founder suggest.

 

[Twisted Stick]

So, me and my buddy just finished our first batch of test prop @ 100 mg/ml following the recipes of PS Labs Founder.

We made some minor mistakes like the following:
-Used a beaker too small for mixing, it was a 100 ml almost to the top, we need something like 200 ml to mix comfortably.
-The Whatman filter kept 2 ml of the solution, now I understand why you need to keep aside 2 ml of oil to run it through [)]

So, we made 98 ml of solution and placed in 10 sterile vials. The filtering process was a pain in the ass, our hands were sore . We sterilized at the end in the stovetop for 20 minutes, is that ok?

Anyhow, now we want to test the purity but we haven't been able to find a Lab that does HPLC testing (I live in the Dominican Republic).

Options?
1. If we inject 1 cc (supposed to be 100 mg) EOD, after four or five injections what should our total testosterone be around?
2. Keep looking for a local lab to do HPLC or find an international lab.

Here is a program that will give a general idea of how much gear is in your system.
https://thinksteroids.com/community/threads/134330942

 

[PS LABS FOUNDER]

i'm using 5% of ba and 15% of bb, just as the recipe of ps labs founder suggest.

are you sure i sugjested 5% ba?

Im backing down from the higher leverls - now i use about 12% bb instead of 15% ..it burns less and my stuff is sterile enough already im not worried at all about it

 

[PS LABS FOUNDER]

i'm using 5% of ba and 15% of bb, just as the recipe of ps labs founder suggest.

i woukd have never said 5% ba thats too high and probably why it burns if it does when you injects
- 2% is what i would have said and 15% bb / but now i do 2% ba and 12% bb because 12% is enough and my stuff is sterile enough where i dont have issues

 

[Kimo1019]

You did in another thread though.

 

[PS LABS FOUNDER]

you did in another thread though.

i would have been mistaken if i did i was wrong ...but can youu show me the thread where i said 5% ba? I might have copy and pasted someone else recipe but i would not say 5% myself as its too much ba

 

[Kimo1019]

I think that's what might of happened. The thread is called how to homebrew /recipes and tips.

I would link it but I'm on my phone using an app.

 

[Kimo1019]

https://thinksteroids.com/community/posts/881747

 

[Kamala]

i would have been mistaken if i did i was wrong ...but can youu show me the thread where i said 5% ba? I might have copy and pasted someone else recipe but i would not say 5% myself as its too much ba

Then don't copy and paste stuff that you haven't read Why would you post something that you don't use or make yourself?

That's why the first thing I asked was how much BA the guy was using...... Almost every recipe you posted has 5% BA, not a fucking wonder it hurts when he injects it.... The guy has made his test E with the same BA content that prop has.

 

[PS LABS FOUNDER]

then don't copy and paste stuff that you haven't read Why would you post something that you don't use or make yourself?

That's why the first thing i asked was how much ba the guy was using...... Almost every recipe you posted has 5% ba, not a fucking wonder it hurts when he injects it.... The guy has made his test e with the same ba content that prop has.

well a lot of those i have done myself ...and a lot of those i have not / id use higher for soe tests and lower for some tests / but 5% ba is too high for most
i always am changin stuff up to get it right but yea some of those i wouldnt use that high of ba