Just made some test prop and decided to use walnut oil for a change and it worked quite well. Just thought I'd share that with the world, lol...
MESO-Rx
Anabolic Steroids
Walnut oil carrier
- Thread starter bigrobbie
- Start date
Never tried it, or even really heard of it.
How does it feel?
PIP?
Easy to push through the barrel?
Bro, you gotta give us some details lol!!!
I was actually impressed with how easily I was able to push it through the whatman. Glute injection gave me no pip, but I must admit I did a thigh pin yesterday and it hurts pretty good this morning...but I've never done well pinning my thighs. Stuffs clear as a bell though:
Here is something on oil options I c&p from: Carrier Oil for Homebrew Steroid Injections – CUREPHARMA
Carrier Oil for Homebrew Steroid Injections
A good carrier oil for homebrew steroid injections should be thin,clean,sterile,painless,low in particulate matter,anallergic,and has good solubilizing ability.
EO = Ethyl Oleate. EO is a solvent, which dissolves the powder but its use is to thin the solution’s viscosity.It’s a thin and expensive oil, created from ethanol, and used as a rubber softener, solvent, and typically used by us as a base for steroid solutions. It provides smooth and painless injections, and will suspend compounds at much higher concentrations than just oil. (It will make 100mg/ml Prop completely painless…) And because it’s a solvent, it allows you to use less Benzyl Benzoate in your blends, however BA is still used to maintain sterility.
GSO = Grape Seed Oil.GSO is called the ‘carrier’.A much superior oil for injections, as opposed to cottonseed oil, but also has a shorter shelf life. It should be stored in a dark place, at room temp.
CSO=Cottonseed oil.It is very thick, and has trouble flowing through a small gauge needle. It’s just a byproduct of the food industry, so it is cheap and readily available.
Also some people use Wesson soybean oil,corn,peanut oil,sesame oil, soy oil, and safflower oil,MCT oil,olive oil,etc.
There are some other carrier oils available like rice oil, apricot kernel, coconut, sweet almond oil, avocado, flaxseed, and watermelon seed oil.
What oil is the thinnest?
Castor – 297.0 thickest
Crambe – 53.6
High oleic safflower – 41.2
Peanut – 39.6
Sunflower – 37.1
Grapeseed – 37.0
Sesame – 35.3
Corn – 34.9
Cottonseed – 33.5
Soybean – 32.6
Safflower – 31.3 thinnest
Some carrier oils have better shelf lives than others. For instance, grapeseed oil only has a shelf life of 6-12 months,Watermelon seed oil is extremely stable and has an almost indefinite shelf life.
How Long Does Oil Last?
Oil Expiration Date
(Unopened) Pantry Fridge
Avocado Oil lasts for 9-12 Months 1 Year
Blended Oil lasts for 2 Years —
Canola Oil lasts for 2 Years —
Coconut Oil lasts for Months-Years —
Corn Oil lasts for 1 Year 1 Year
Chili Oil lasts for 9-12 Months 1 Year
EVOO(Extra Virgin Olive) lasts for 2-3 Years —
Grape Seed Oil lasts for 3 Months 6 Months
Hazelnut Oil lasts for 1 Year 1 Year
Macadamia Nut Oil lasts for 2 Years 2-3 Years
Olive Oil lasts for 2-3 Years —
Peanut Oil lasts for 3 Years 3 Years
Sesame Oil lasts for 1 Years 2 Years
Safflower Oil lasts for 2 Years 2 Years
Sunflower Oil lasts for 2 Years 2 Years
Truffle Oil lasts for 1 Year 1 Year
Vegetable Oil lasts for 1 Year 1 Year
Walnut Oil lasts for 1 Year 1 Year
Your oil should be stored in a dark place like pantry or cellar,and refrigerating oil can extend its shelf life as stated above.
Carrier Oil for Homebrew Steroid Injections
A good carrier oil for homebrew steroid injections should be thin,clean,sterile,painless,low in particulate matter,anallergic,and has good solubilizing ability.
EO = Ethyl Oleate. EO is a solvent, which dissolves the powder but its use is to thin the solution’s viscosity.It’s a thin and expensive oil, created from ethanol, and used as a rubber softener, solvent, and typically used by us as a base for steroid solutions. It provides smooth and painless injections, and will suspend compounds at much higher concentrations than just oil. (It will make 100mg/ml Prop completely painless…) And because it’s a solvent, it allows you to use less Benzyl Benzoate in your blends, however BA is still used to maintain sterility.
GSO = Grape Seed Oil.GSO is called the ‘carrier’.A much superior oil for injections, as opposed to cottonseed oil, but also has a shorter shelf life. It should be stored in a dark place, at room temp.
CSO=Cottonseed oil.It is very thick, and has trouble flowing through a small gauge needle. It’s just a byproduct of the food industry, so it is cheap and readily available.
Also some people use Wesson soybean oil,corn,peanut oil,sesame oil, soy oil, and safflower oil,MCT oil,olive oil,etc.
There are some other carrier oils available like rice oil, apricot kernel, coconut, sweet almond oil, avocado, flaxseed, and watermelon seed oil.
What oil is the thinnest?
Castor – 297.0 thickest
Crambe – 53.6
High oleic safflower – 41.2
Peanut – 39.6
Sunflower – 37.1
Grapeseed – 37.0
Sesame – 35.3
Corn – 34.9
Cottonseed – 33.5
Soybean – 32.6
Safflower – 31.3 thinnest
Some carrier oils have better shelf lives than others. For instance, grapeseed oil only has a shelf life of 6-12 months,Watermelon seed oil is extremely stable and has an almost indefinite shelf life.
How Long Does Oil Last?
Oil Expiration Date
(Unopened) Pantry Fridge
Avocado Oil lasts for 9-12 Months 1 Year
Blended Oil lasts for 2 Years —
Canola Oil lasts for 2 Years —
Coconut Oil lasts for Months-Years —
Corn Oil lasts for 1 Year 1 Year
Chili Oil lasts for 9-12 Months 1 Year
EVOO(Extra Virgin Olive) lasts for 2-3 Years —
Grape Seed Oil lasts for 3 Months 6 Months
Hazelnut Oil lasts for 1 Year 1 Year
Macadamia Nut Oil lasts for 2 Years 2-3 Years
Olive Oil lasts for 2-3 Years —
Peanut Oil lasts for 3 Years 3 Years
Sesame Oil lasts for 1 Years 2 Years
Safflower Oil lasts for 2 Years 2 Years
Sunflower Oil lasts for 2 Years 2 Years
Truffle Oil lasts for 1 Year 1 Year
Vegetable Oil lasts for 1 Year 1 Year
Walnut Oil lasts for 1 Year 1 Year
Your oil should be stored in a dark place like pantry or cellar,and refrigerating oil can extend its shelf life as stated above.
jstarks11
New Member
Safflower Oil is the best. I've always used it in conjunction with MCT or Mig. Shit is thin, and lasts forever too. And, MOST of the time you can find it CLEARER than most all other oils save MCT.
I will try safflower oil next batch, thanks for the advice.
jstarks11
New Member
Yes of course bro!!! And you will like that safflower oil. Try to find a brand LouAnna or something like that. Don't worry about USP and all that. When you filter it make sure to use .22 not .45 and you will be FINE!!!! 120C heat when brewing.
Brotato
Member
you don't need to go anywhere NEAR that high temperature for most compounds, and honestly if you let the hormone sit in just the BB/BA overnight it will mostly dissolve into solution before even adding the carrier, let alone heat.
jstarks11
New Member
The key words are "MOST COMPOUNDS" so instead of keeping a mental note of what compounds I can or cannot get away with low heat, no heat, high heat, bla bla etc etc. I use a UNIFORM approach. Does 120C HURT, any compounds? Answer: NO, Does 120C work for hard to hold compounds? Answer Yes. So instead of memorizing that this compound holds when taken to 111C and this compound holds at room temp. Oh and this compound holds at room temp too. And these compounds work well holding when taken to 89C. Don't forget that thems compounds hold at 75F just slightly above room temp. And also we have that one finicky compound that holds only when taken to 119 or higher. And if you want we can mention that you need 101C or higher for this other one.
Ahhhhh fucketh it.... Does everything work no problem when you take it to 120C ???? Answer: yes.... So I take everything to 120C, I have no problems with Test C crashing when vial is left out in car overnight and temp gets down to 40 degrees. No problems with tren Ace at 120mg/ml and have even had it at 150mg/ml. Not often but have had no problems with that.
So to keep things universal and uniform and easy to remember. I use 2% BA, 18%BB and 120C total heat with a starting point on filtration at around 60C while cooling down from the 120C. I have capped, liquid oralized, brewed, and even made steroid candies out of 42 coupounds and counting and.... No problems.
Are there other ways to do things? Yes. Are they more complicated overall to me? Yes.
Simple stupid.
Wins the race.
Ahhhhh fucketh it.... Does everything work no problem when you take it to 120C ???? Answer: yes.... So I take everything to 120C, I have no problems with Test C crashing when vial is left out in car overnight and temp gets down to 40 degrees. No problems with tren Ace at 120mg/ml and have even had it at 150mg/ml. Not often but have had no problems with that.
So to keep things universal and uniform and easy to remember. I use 2% BA, 18%BB and 120C total heat with a starting point on filtration at around 60C while cooling down from the 120C. I have capped, liquid oralized, brewed, and even made steroid candies out of 42 coupounds and counting and.... No problems.
Are there other ways to do things? Yes. Are they more complicated overall to me? Yes.
Simple stupid.
Wins the race.
Love your labels. Gives it a real "pharma" look.
I have those same labels. Same source? Lol
