Weight Displacement of Raws

[Carter79]

I know there are a lot of veteran brewers here so I wanted to make sure these seem right.

"Densities of Common Steroid Powders (Dry Weight) per mL aka CC aka cm^3.

Testosterone Base - Density 1.12g/mL
Testosterone Propionate - Density 1.10g/mL
Testosterone Enanthate - Density 1.06g/mL
Testosterone Cypionate - Density 1.10g/mL
Testosterone Decanoate - Density 1.04g/mL
Testosterone Isocaproate - Density 1.07g/mL
Testosterone Phenylpropionate - Density 1.13g/mL
Trenbolone Acetate - Density 1.18g/mL
Trenbolone Enanthate - Density 1.10g/mL
Nandrolone Decanoate - Density 1.04g/mL
Masterone propionate - Density 1.07g/mL

Ok but what does that all mean Mr.Rose? It means when we add 1 gram of powder to our solvent mixture (that's the oil, BB, BA mix) it will displace the mixture at this amount:

Testosterone Base - 1g Displaces 0.893mL
Testosterone Propionate - 1g Displaces 0.909mL
Testosterone Enanthate - 1g Displaces 0.943mL
Testosterone Cypionate - 1g Displaces 0.909mL
Testosterone Decanoate - 1g Displaces 0.962mL
Testosterone Isocaproate - 1g Displaces 0.935mL
Testosterone Phenylpropionate - 1g Displaces 0.885mL
Trenbolone Acetate - 1g Displaces 0.848mL
Trenbolone Enanthate - 1g Displaces 0.909mL
Nandrolone Decanoate - 1g Displaces 0.962mL
Masterone Propionate - 1g Displaces 0.935mL"

Do these seem accurate? I pulled them from some random forum online as I couldn't find anyone having one big thread about weight displacements here. If it has been covered please just delete this that is my fault.

 

[Eman]

Pretty much the same displacements numbers I use... Looks like it came from basskiller.

 

[Carter79]

Pretty much the same displacements numbers I use... Looks like it came from basskiller.

Sweet thanks. That is not the guy's name on the forum but he probably took it to.

 

[kdq99]

Pretty much the same displacements numbers I use... Looks like it came from basskiller.

I am still trying to find the displacements for the following:

Test U
NPP
DHB
Primo E

Do you know what they are or where I might find them. I have been looking for awhile with no luck...

 

[Eman]

I am still trying to find the displacements for the following:

Test U
NPP
DHB
Primo E

Do you know what they are or where I might find them. I have been looking for awhile with no luck...

Nope, I typically use .9 for any I don't know... It makes it come out close enough.

 

[AnTabolic73]

So you know how much raws, ba and bb you need from the recipe. It's not important knowing exactly how much oil you will need. You put the raws/ba/bb in a beaker/graduated cylinder. You know it's supposed to add up to 100mL, or whatever the recipe yields. Just fill the glass to the 100 mL hash mark with oil.

It's not important knowing what displaces what, or powder density...

 

[ScorpionJuice]

I know there are a lot of veteran brewers here so I wanted to make sure these seem right.

"Densities of Common Steroid Powders (Dry Weight) per mL aka CC aka cm^3.

Testosterone Base - Density 1.12g/mL
Testosterone Propionate - Density 1.10g/mL
Testosterone Enanthate - Density 1.06g/mL
Testosterone Cypionate - Density 1.10g/mL
Testosterone Decanoate - Density 1.04g/mL
Testosterone Isocaproate - Density 1.07g/mL
Testosterone Phenylpropionate - Density 1.13g/mL
Trenbolone Acetate - Density 1.18g/mL
Trenbolone Enanthate - Density 1.10g/mL
Nandrolone Decanoate - Density 1.04g/mL
Masterone propionate - Density 1.07g/mL

Ok but what does that all mean Mr.Rose? It means when we add 1 gram of powder to our solvent mixture (that's the oil, BB, BA mix) it will displace the mixture at this amount:

Testosterone Base - 1g Displaces 0.893mL
Testosterone Propionate - 1g Displaces 0.909mL
Testosterone Enanthate - 1g Displaces 0.943mL
Testosterone Cypionate - 1g Displaces 0.909mL
Testosterone Decanoate - 1g Displaces 0.962mL
Testosterone Isocaproate - 1g Displaces 0.935mL
Testosterone Phenylpropionate - 1g Displaces 0.885mL
Trenbolone Acetate - 1g Displaces 0.848mL
Trenbolone Enanthate - 1g Displaces 0.909mL
Nandrolone Decanoate - 1g Displaces 0.962mL
Masterone Propionate - 1g Displaces 0.935mL"

Do these seem accurate? I pulled them from some random forum online as I couldn't find anyone having one big thread about weight displacements here. If it has been covered please just delete this that is my fault.

I appreciate you asking this question, I have been searching weights/ density of orals. Do you remember if that website had specific oral compounds to filler ratios? It’s probably a dumb question, I’m just trying to make my own experimental muscle candy.

Thanks in advanced

 

[Carter79]

I appreciate you asking this question, I have been searching weights/ density of orals. Do you remember if that website had specific oral compounds to filler ratios? It’s probably a dumb question, I’m just trying to make my own experimental muscle candy.

Thanks in advanced

They don't but it's a pretty easy calculation if you have a scale I just made a batch of 400 Anadrol-25 pills

 

[ScorpionJuice]

They don't but it's a pretty easy calculation if you have a scale I just made a batch of 400 Anadrol-25 pills

I’m also looking for the right filler that matches with certain compounds. I read that it’s ideal to have similar textures/weight. Maybe this is the wrong thread. Sorry if this isn’t the place for that.

 

[Eman]

I’m also looking for the right filler that matches with certain compounds. I read that it’s ideal to have similar textures/weight. Maybe this is the wrong thread. Sorry if this isn’t the place for that.

Personally, I've found creatine to be a good filler. I don't necessarily agree that it needs to have the same weight... Reason being, some raws are extremely lightweight and if you use a filler that's the same way, it is a pain in the ass to pack into the capsule.

I had a freebie BCAA powder that I didn't like the taste of so I tried using it as a filler... I had to tamp it down ten times and it was still not packing into the capsule great.

With that said, you don't want to be using a filler that's extremely different from the raw either because it doesn't mix real well.

 

[Carter79]

I’m also looking for the right filler that matches with certain compounds. I read that it’s ideal to have similar textures/weight. Maybe this is the wrong thread. Sorry if this isn’t the place for that.

You don't need them to match up at all. You can if you want for your preference but you don't need them to match texture and weight wise if you are just capping them.

 

[ScorpionJuice]

Ahh that’s simpler. I was breaking my head trying to match each individual compound.

Thank you

 

[ScorpionJuice]

Personally, I've found creatine to be a good filler. I don't necessarily agree that it needs to have the same weight... Reason being, some raws are extremely lightweight and if you use a filler that's the same way, it is a pain in the ass to pack into the capsule.

I had a freebie BCAA powder that I didn't like the taste of so I tried using it as a filler... I had to tamp it down ten times and it was still not packing into the capsule great.

With that said, you don't want to be using a filler that's extremely different from the raw either because it doesn't mix real well.

I’ve already read about creative, baking soda, glutamine and vitamins to

Personally, I've found creatine to be a good filler. I don't necessarily agree that it needs to have the same weight... Reason being, some raws are extremely lightweight and if you use a filler that's the same way, it is a pain in the ass to pack into the capsule.

I had a freebie BCAA powder that I didn't like the taste of so I tried using it as a filler... I had to tamp it down ten times and it was still not packing into the capsule great.

With that said, you don't want to be using a filler that's extremely different from the raw either because it doesn't mix real well.

Thank you, I’m definitely going to give creatinine a try. I’ve heard about baking soda and glutamine as well. Is there a specific place to find colored coated size 0 caps?

 

[Carter79]

I’ve already read about creative, baking soda, glutamine and vitamins to

Thank you, I’m definitely going to give creatinine a try. I’ve heard about baking soda and glutamine as well. Is there a specific place to find colored coated size 0 caps?

Amazon

 

[ScorpionJuice]

Thank you I just ordered some.. want to guess what’s going in the blue one?

 

[Carter79]

Thank you I just ordered some.. want to guess what’s going in the blue one?

Tons of viagra no clue