Pellet Tren :)

[MANWHORE]

First I soaked the pellets for little over a week in BB, then I added the BA and GSO and let sit another two days.
Then I sat watching tv and crushed the little that was left thoroughly with the top of a metal fork ..

This works so good just don't be in a rush.. make sure you swirl every now and then crush some more ..
I then baked enough to hear, took a sock and drained the binder and filler.. This is/was most helpful for me so it doesn't clog the .45 filter..

Now I baked for couple hours and let sit in oven until it cooled ..
I put back away for next day filtering..
Next day I heated enough to make filtering easier and went through a .45 which dripped out slow but at least I didn't have binder and filler in the way..
After the .45 I did the .22 filtering ..
Yea it was slow but I only got 80ml and I'm used to filtering hundreds of vials so for me it's just another day in the park
The end result you ask ..
The cleanest pellet Tren I've ever seen
And I'm guessing with all the soaking and crushing, the strongest pellet Tren I'm going to get..

I always heated my gear to sterilize
Some of you are told you don't have to and you don't but I like to go the extra
Because it gives me piece of mind
And it's just so easy.. don't be lazy

 

[Wunderpus]

I was under the impression tren is the most sensitive to heat application, in terms of breaking down/damaging the hormone. @Docd187123 @Big_paul ?

Also, my pellet tren was very light in comparison. Did you use fina or component? I used component, did not bake and MCT oil. It worked just like regular good UGL tren, I wouldn't say it was particularly more remarkable.

 

[rutman]

Too much heat... Pellet tren always comes out a lighter yellow.


Ohh.... And nobody gives a fuck if you're used to filling hundreds of vials. You don't know what the fuck you're doing.

 

[Big_paul]

I was under the impression tren is the most sensitive to heat application, in terms of breaking down/damaging the hormone. @Docd187123 @Big_paul ?

Also, my pellet tren was very light in comparison. Did you use fina or component? I used component, did not bake and MCT oil. It worked just like regular good UGL tren, I wouldn't say it was particularly more remarkable.

That has been my experience. Especially finaplex if heat is used to dissolve it. If you have the finished product and heat it then, it will not change color and get dark.

My brother and I have had this conversation before. If you use 22.5 filter, no heat is necessary. Heat does nothing to give you a sterile product and it could damage its potency. You don't need heat bro, it's old school. The only time I use heat 350-375, to sterilize glass and stoppers, before filling.

 

[Wunderpus]

That has been my experience. Especially finaplex if heat is used to dissolve it. If you have the finished product and heat it then, it will not change color and get dark.

My brother and I have had this conversation before. If you use 22.5 filter, no heat is necessary. Heat does nothing to give you a sterile product and it could damage its potency. You don't need heat bro, it's old school. The only time I use heat 350-375, to sterilize glass and stoppers, before filling.

I set my hot plate to 105f when I dissolve the powders into the BA/BB/Oil, I don't think that's hot enough to damage the hormone, but makes it dissolve WAY faster IME.

 

[Wunderpus]

Here's my pellet tren

 

[Big_paul]

Years ago when I first started brewing tren. The instructions were to use a 45 whatman and then heat the finished product at 275 for 45min. We were not as educated on the subject as we are now.

 

[Big_paul]

Here's my pellet tren
View attachment 45293

Ain't that purdy

 

[Wunderpus]

Ain't that purdy

Came out great. MCT is a great carrier oil for it, i'm pleased.

 

[MANWHORE]

I was under the impression tren is the most sensitive to heat application, in terms of breaking down/damaging the hormone. @Docd187123 @Big_paul ?

Also, my pellet tren was very light in comparison. Did you use fina or component? I used component, did not bake and MCT oil. It worked just like regular good UGL tren, I wouldn't say it was particularly more remarkable.

MCT probably shouldn't be baked and those guys you called to the thread should show proof of break down .. they can't so I don't want to hear it .. : )
No offense but I'm tired of the hearsay

I use GSO I don't like MCT it's too thin I used it a few times and GSO is a better choice because It can be heated ..

Component TH all the way ..
$150.00 for each package of 4 grams it's been in my fridge for months I forgot about it lol

 

[MANWHORE]

Here's my pellet tren
View attachment 45293

How much you paying for the pellets I lost my customer info who hooked me up with them

If you don't mind I'll need more
Because it's all gone already lol
Fuckin vultures : )

 

[Wunderpus]

How much you paying for the pellets I lost my customer info who hooked me up with them

If you don't mind I'll need more
Because it's all gone already lol
Fuckin vultures : )

I honestly don't remember, some vet site, it was a while ago... I was sitting on them in the fridge for some time. Is that dude still sellign them on Ebay?

 

[ebkallday]

Here is my pellet brew... Clean, clear and strong! 50 mls I just started on. Its gonna get real Fucking hot in July!!!

 

[ebkallday]

I used GSO by the way.

 

[MANWHORE]

I used GSO by the way.

I like GSO best..
The heat darkens it some
But mine was darker than yours even before I heated ..

I'd rather not get into a Tren cycle right now but I'll hear it from customers within a week.
My pellet brew before this was strong but I've always had very strong Tren since day one from raws so I don't expect much stronger then what I've been putting out..

The thing I like about the pellets is that it probably doesn't have any leftover methanol or whatever that stuff is the Chinese are using and any other impurities

 

[MANWHORE]

Here is my pellet brew... Clean, clear and strong! 50 mls I just started on. Its gonna get real Fucking hot in July!!!

View attachment 45328

How long did you soak your pellets in BB

 

[napaulm]

i made comp-th, i let the mix sit thru the coffee filter overnight. otherwise the crushed pellets dissolved in a few hours. didnt bother with heating, that doesnt even make sense. i used to. man, this is smooth and i think more potent than the finiplix. tho i used to put the fina in the oven and maybe the hormone was damaged. i wont use heat again. 35 a day and my strength is crazy. and no sides at all. i get it for 80 bucks for the 4g pack.

 

[MANWHORE]

i made comp-th, i let the mix sit thru the coffee filter overnight. otherwise the crushed pellets dissolved in a few hours. didnt bother with heating, that doesnt even make sense. i used to. man, this is smooth and i think more potent than the finiplix. tho i used to put the fina in the oven and maybe the hormone was damaged. i wont use heat again. 35 a day and my strength is crazy. and no .

Heat never damaged mine and it makes sense when you want to sterilized before filtering as an extra precautionary measure you don't want to that's up to you

 

[napaulm]

Heat never damaged mine and it makes sense when you want to sterilized before filtering as an extra precautionary measure you don't want to that's up to you

true, tho if u read different forums most cats say heat doesnt sterilize shit. at least, not the temps people use. maybe the 400-500 degree method but no way im doing that. ive never seen definitive proof either way.
thats why i filter the oil with a .22 then i filter the finished product with the .45.

 

[rutman]

true, tho if u read different forums most cats say heat doesnt sterilize shit. at least, not the temps people use. maybe the 400-500 degree method but no way im doing that. ive never seen definitive proof either way.
thats why i filter the oil with a .22 then i filter the finished product with the .45.

So you're more concerned about contaminants that are potentially in the oil, rather than what might be in the raws?


Sent from my iPhone using Tapatalk