Recipes ( TE,TA, EQ)

[Mechanics]

Hey meso brothers . what's your best recipe .and ratio . or if you can get it to hold with out BB.
Looking for some ideas .

Test e , Test P , Tren A, EQ, DECA,sust .

 

[LordSamuilo]

Test e and eq don't need bb @300 or lower . deca probably doesn't either , but I always add 10% just to be safe .

Prop , tren ace , and sust will all hold at 2%15% easy , and I've seen prop and tren as low as 1% 10% but that's pretty much where you start running a good chance they'll crash especially if you don't have your brewing technique quite down pat yet . if your not worried about super low solvent gear 2/15 works for most everything outside of a few odd compounds, and if you are its a safe place to start tweaking your recipes and dialing your solvent ratios back ..

Just make sure you right down everything you put into your brew incase shit goes wrong because you can usually rectify most mistakes .. I just made some oil base Winny and had to adjust the recipe probably a dozen times before I got it to hold . if those are the only compounds you're working with it should be easy as can be though ..

 

[master.on]

XKawN homebrewing bible

 

[Mechanics]

Test e and eq don't need bb @300 or lower . deca probably doesn't either , but I always add 10% just to be safe .

Prop , tren ace , and sust will all hold at 2%15% easy , and I've seen prop and tren as low as 1% 10% but that's pretty much where you start running a good chance they'll crash especially if you don't have your brewing technique quite down pat yet . if your not worried about super low solvent gear 2/15 works for most everything outside of a few odd compounds, and if you are its a safe place to start tweaking your recipes and dialing your solvent ratios back ..

Just make sure you right down everything you put into your brew incase shit goes wrong because you can usually rectify most mistakes .. I just made some oil base Winny and had to adjust the recipe probably a dozen times before I got it to hold . if those are the only compounds you're working with it should be easy as can be though ..

I've seen a lot of recipes 1/15 .
When your at 2% do you get any pip?

 

[Mechanics]

XKawN homebrewing bible

Yes sir. I've definitely read that multiple times .
You did a great job at that post . And I'm sure I speak for a lot of the meso homebrew crew when I say THANK YOU?

 

[Mechanics]

A

Test e and eq don't need bb @300 or lower . deca probably doesn't either , but I always add 10% just to be safe .

Prop , tren ace , and sust will all hold at 2%15% easy , and I've seen prop and tren as low as 1% 10% but that's pretty much where you start running a good chance they'll crash especially if you don't have your brewing technique quite down pat yet . if your not worried about super low solvent gear 2/15 works for most everything outside of a few odd compounds, and if you are its a safe place to start tweaking your recipes and dialing your solvent ratios back ..

Just make sure you right down everything you put into your brew incase shit goes wrong because you can usually rectify most mistakes .. I just made some oil base Winny and had to adjust the recipe probably a dozen times before I got it to hold . if those are the only compounds you're working with it should be easy as can be though ..

Also when you say it's safe to say 0.15 BB will keep most compounds from crashing .

Let me ask you if your not 100% sure of your solvents quality ( speaking in general) would to take the risk of your gear crashing or is better to play it safe and maybe go
BA 0.01
BB 0.17

 

[LordSamuilo]

I've seen a lot of recipes 1/15 .
When your at 2% do you get any pip?

You can go one % ba if you get pip easily , but generally speaking %2 won't cause pip . plus ba isn't really there for solubility so you don't run any more risk of your gear crashing if you go 1% . That's pretty much your own call .

Let me ask you if your not 100% sure of your solvents quality ( speaking in general) would to take the risk of your gear crashing or is better to play it safe and maybe go
BA 0.01
BB 0.17

If you get your solvents from a good medical supply company you shouldn't ever run into any problems with sub par quality , I use medlabsupply same as a lot of other guys and they sell quality products . generally speaking though your not gonna see much difference from 15-20% in how well they hold (at normal concentrations) especially with the compounds you mentioned . the recipes I use for most of the basic compounds varies alot , just because I've brewed them at different ratios and know what i like personally . that's why I just gave you the numbers 2/15 because its just a middle of the ground ratio . anything 1-2%ba and 15-20% bb is what I'd consider "safe" , anything north or south of those numbers is a chance of running into problems in one form or the other ... But after you get the basics down that's 90% of the fun of brewing is experimenting with different shit and seeing what works and what doesn't ..