Saiyan Labs (US Domestic)

[SaiyanLabs]

Saiyan Labs

About Me:

I'm Dragon from Saiyan Labs. I have a few years of experience working in laboratory settings under the supervision of extremely experienced Chemists, and have recently shifted my focus towards brewing "workout supplements".

I'm here to hopefully survive the shark attack and offer competitive prices on quality gear, with good customer service to match.

This is a one person operation. I have a phone dedicated to receiving emails from tuta/protonmail. I will do my absolute best to get back to you as soon as possible, however I am a human being that requires sleep (for now). If you message me in the middle of the night it may or may not take me a few hours to reply depending on how much Tren I am running. I aim to offer quality gear at affordable prices, while being completely transparent.

Compared to other sources I may have a limited selection. While saying that I would like to put out that I am not necessarily interested in expanding as quickly as I can. I've seen multiple sources get a good start and then attempt to expand too rapidly, adding too many exotic compounds or too many variations on items. We still need to eat, fuck, sleep, fuck, excersise, fuck, and fuck more. I honestly believe many sources started off with good intentions, but quickly overwhelmed themselves by spreading thin, and ghosted many customers due to the pressure. I'd like to avoid this, so for a while I may not be your one stop shop if you are an advanced user, but hopefully after the vetting and in the future I can be the reliable source when it comes to the foundational items that every lifter needs.


BREWING:

All glassware is cleaned after usage. After a brew I will gather all glassware used and rinse with soap and water. I'll then use a paper towel soaked in acetone to clean it the best I can by hand. Warm concentrated alconox will be poured into glassware and will sit for a few minutes while I prep materials for the next brew or watch some Netflix. I'll then scrub it with a brush and do a final rinse with DI water. If everything has gone well the water will sheet off which assures me it is clean. After I will nuke it in a pressure cooker to sterilize it.

Smaller items such as vials will be sterilized in a miniature autoclave I have before having oils poured inside.

I always ensure I am wearing a labcoat, closed toe footwear, gloves, a facemask, and goggles. All items will be filtered through a .2 whatman filter, then dispensed using a seripettor for accuracy.
Products are labelled.


PICTURES

Some recent vials of mine. Back left is Tren A, back right is test e, front is test/mast blend. All for personal use, made it just the other night.



The main equipment I will be using on a day to day. Photo taken directly after being used to brew above vials.



Intro promo:

Every order over $80 will receive:

- Free shipping
- 1 free oral of your choice*

*free oral will be 30 count of whichever you choose. Please mention Meso forums in the email and please make sure you mention that you would like your free oral to be x.

OILS

Product | Price | Concentration
-------------------------------
Test E | $25 | 300mg/mL
Test P | $40 | 200mg/mL
Mast E | $40 | 250mg/mL
Mast P | $35 | 100mg/mL
Tren A | $30 | 120mg/mL
Tren E |$40 | 250mg/ml
Deca | $35 | 250mg/mL

I use GSO as my carrier oil, please do not inject this into your dog.

ORALS

Product | Price | Dosage | Quantity
-----------------------------------
Dbol | $40 | 25mg | 60ct **
Anavar | $45 | 25mg | 60ct **
Winny | $25 | 25mg | 30ct
Anadrol | $20 | 25mg | 30ct
Superdrol | $25 | 10mg | 30ct
Asin | $50 | 25mg | 30ct
Nolva | $35 | 20mg | 30ct
Clomid | $20 | 50mg | 30ct
Cialis | $25 | 20mg | 20ct

**Half orders are able to be made on these items. Just ask for a half order of Dbol/Var. It will be 30ct at $20usd/$22usd respectively.

Capsule size: #00
Filler: Baking Soda

ORDER INFORMATION

Minimum Order: None during intro promo
Shipping: $10 (Free if you spend $80)
Payment: BTC only.
Email: Saiyanlabs@tutanota.com
Or proto: Saiyanlabs@protonmail.com

I am only able to offer shipping to US domestic at this time.
Please use a Tutanota or Protonmail email address, and please only email Tuta to Tuta or Proton to Proton.

Emailing me from anything else will result in your email being deleted without being opened.

Questions I've commonly seen asked:

Why Meso? You know we're going to rip you apart, so why come here?

I view Meso as the Roman Coliseum honestly. If you can survive as a source at Meso, you can survive anywhere. You all also pull no punches, and are willing to criticize sources when needed. I am not a super human, and I'm not perfect. I will take as much criticism as I can. I will almost certainly make mistakes and I am hoping that being here will help me grow from those mistakes, and help you grow from the quality gear that comes from the experience.

Do you have reps?

No, I think reps are a bit useless and serve no purpose other than being a glorified cheerleader. At best they answer basic questions or email the source, at worse they shill constantly and are an annoying advertisement.

Donation to Anabolic Labs?

I plan to make my donation in around a month and a half, hopefully less.

Do you have pictures with crumpled paper with Meso on it?

Posted above, it should show the picture directly with no links but if not I will edit and fix it.

Why the fuck aren't you posting on a friday retard?

I double checked before writing this actually, it is friday today. Seen way too many sources get roasted over that.

Where the FUCK are the boobs?

I'll do you one better.



Unfortunately she fucked up and didn't hold the sign in this picture.



I read this post three times, pretty sure I didn't forget anything but I probably did. Going to cook some food, I'm starving.

- Dragon.

 

[egonormical1010]

Not sure how this has made it so long with nothing. Especially with pics

 

[Gaynz39]

I would bet my Left Nut that this is the Old DBZ Labs. Say it isn’t so

 

[Omegistosalex]

Hmm you did your homework at least, and that ass is thicc!

 

[ghibli]

I’ll start. What’s your method on capping your capsules? How can we be sure it’s an accurate amount? How many capsules do you make at a time? Basically walk us through how you cap.

 

[hurricane]

Slow day at MESO.

 

[SaiyanLabs]

Not sure how this has made it so long with nothing. Especially with pics

I posted this yesterday but it took a day and all night to get past moderation, so that is probably why. Set aside a whole day staring at my screen and then of course it gets approved during my study day lol

 

[SaiyanLabs]

I would bet my Left Nut that this is the Old DBZ Labs. Say it isn’t so

I've never sourced before under any names.

I’ll start. What’s your method on capping your capsules? How can we be sure it’s an accurate amount? How many capsules do you make at a time? Basically walk us through how you cap.

100 capsules at a time, I use a manual capper. I use baking soda as filler. I used to cap a bit differently which was fine for personal use, HOWEVER, about two weeks ago when I was looking at source intros I saw @mighty.dawg311 posting on Olympia Labs intro breaking down the process for capping. This seemed extremely popular and so I have adopted that method for capping verbatim. I can link the thread in question or I can manually copy and paste it, but that is exactly how I cap now.

 

[penche]

Fill levels look sloppy. Just sayin.

 

[SaiyanLabs]

I want to go ahead and apologize if I have any slower replies today. I was unaware that posts had to get moderator approved, so I set aside all day friday to be available, and I'm currently on a study "date" with a female friend. I'll pop in here as much as humanly possible to answer any questions that come up. Some pre-emptive ones that I thought of last night:

I will be labelling my vials. I'm currently working on some snazzy designs in photoshop and then I will be printing them out myself.

All vials will have batch numbers. Everything will start from batch 0 and go on from there.

I will be reaching out to Weights and Measure for testing. Before I had reached out to Jano for testing but I realize now that he is not extremely popular here. I have already paid for his testing services and have mailed my items off to him already. I am currently waiting for him to receive and then test, he can confirm this if necessary.

That's all that comes to mind right now.

 

[SaiyanLabs]

Fill levels look sloppy. Just sayin.

I agree. This was a personal brew that I made for myself using the leftover raws. I'm currently waiting for my new shipment to come in. I was taking pictures at the same time and decided to just snap a picture of some freshly brewed. It is for my personal use and so I don't need anything fancy. Products made for customers will of course be properly filled. I liked how it looked neatly stacked, and I had even busted out a lamp to achieve some nice lighting lol.

 

[ghibli]

So all these capsules are a new batch and made the same exact way from the other source’s thread?

Sure just copy and paste it, it might be beneficial to others who are curious. It might even help if you listed out how you do it yourself with and pictures of the finished caps and the machine(s) used.

Good luck

 

[mp46]

....during my study day lol

Oh god. Do I even want to know?

And if you read through previous posts/threads you should have already known I’d be asking about your sterile practices, which a pressure cooker doesn’t qualify, and that @Mighty-mouse would be asking about your step by step capping process from mixing, measuring, etc.

 

[kdq99]

So all these capsules are a new batch and made the same exact way from the other source’s thread?

Sure just copy and paste it, it might be beneficial to others who are curious. It might even help if you listed out how you do it yourself with and pictures of the finished caps and the machine(s) used.

Good luck

So you have sent raws out for testing but you're waiting on more raws to arrive to make more? So the testing wont reflect what you're actually trying to peddle here... see the issue?

 

[little]

How do you have 200/ml test p but your Deca and stuff is 250?

Nice pics good job for us not having to ask.

The next pic should be back shot bent over cheeks spread meso with the butthole as the O

 

[mp46]

Wai, you’re waiting on raws to brew? What the fuck can you sell today, you’re personal stash?

 

[SaiyanLabs]

So you have sent raws out for testing but you're waiting on more raws to arrive to make more? So the testing wont reflect what you're actually trying to peddle here... see the issue?

So perhaps I should have clarified. I have raws batch 0. I sent this off for testing, and brewed this. I set aside some leftover raws for myself, brewed that and took a picture. The brew from raws batch 0 is what I will be selling, and I'm hoping Jano will soon receive my shipment and send results back asap. I have already ordered another raws batch that is coming. This will be batch 1. I will ALSO test this batch and then brew it and sell it.

So all these capsules are a new batch and made the same exact way from the other source’s thread?

Sure just copy and paste it, it might be beneficial to others who are curious. It might even help if you listed out how you do it yourself with and pictures of the finished caps and the machine(s) used.

Good luck

All new capsules are capped according to how mightmouse mentioned to Olympia Labs in his intro thread, yes. I would be more than happy to do it step by step along with pictures, I honestly did not think to include that.

Direct quote from mightymouse on olympias thread:

" Load all 100 caps and use your tamping tool if you do when pressing

Now the fun part

Empty all baking soda and measure it (say it’s 41,500mg)

Divide that by the 100 = 415mg of BS per cap

Now you have to fill all caps with active ingredient only and use the tamping tool as well

Empty and weigh again (say it’s 22,500mg)- this is why no one does this.

Divide that by 100 = 225mg of active per cap (this will be different for every compound)

Now you figure out the ratio of active to baking soda

25mg active = unknown mg of BS

225mg of active = 415mg of BS

So the formula is
(25mg active * 415mg BS) / 225mg active = 46.11 of baking soda (this is the unknown stated above and how much needs to be removed per pill to make room for 25mg of active.)

415mg baking soda minis 46 = 368 mg of baking soda each cap

Then of course 2500mg of active

So you will need 36,800mg of baking soda and 2500mg of active to successfully make this batch.

When I say active it could be anything but not talking any particular active ingredient. "

And of course, grinding the active with mortar and pestle before mixing.

 

[SaiyanLabs]

Oh god. Do I even want to know?

And if you read through previous posts/threads you should have already known I’d be asking about your sterile practices, which a pressure cooker doesn’t qualify, and that @Mighty-mouse would be asking about your step by step capping process from mixing, measuring, etc.

I'm just tutoring her. I posted in the initial post but the method I use ensures cleanliness, and the pressure cooker for flasks reaches sufficient pressure and temperature levels to make them sterile. I can post studies mentioning this, and I'm confident in it. I am working towards getting a large autoclave so I may sterilize my flasks, vials, etc all in one nice area.

Wai, you’re waiting on raws to brew? What the fuck can you sell today, you’re personal stash?

I probably worded it wrong, but I clarified in a post I just made so hopefully that clears things up.

I had my initial raws, have sent some off for testing with jano and I have brewed them. I ordered some more raws because I don't want to be caught with my pants down if business picks up.

 

[mp46]

I'm just tutoring her. I posted in the initial post but the method I use ensures cleanliness, and the pressure cooker for flasks reaches sufficient pressure and temperature levels to make them sterile. I can post studies mentioning this, and I'm confident in it. I am working towards getting a large autoclave so I may sterilize my flasks, vials, etc all in one nice area.



I probably worded it wrong, but I clarified in a post I just made so hopefully that clears things up.

I had my initial raws, have sent some off for testing with jano and I have brewed them. I ordered some more raws because I don't want to be caught with my pants down if business picks up.

Sparta posted studies as well. But they were used for dental instruments in 3rd world countries, I’d like to think were above 3rd world countries. Hell, I have a pressure cooker setup and use it for my personal stuff. But if I’m doing anything that others will use, I pull out my autoclave.

 

[SaiyanLabs]

Sparta posted studies as well. But they were used for dental instruments in 3rd world countries, I’d like to think were above 3rd world countries. Hell, I have a pressure cooker setup and use it for my personal stuff. But if I’m doing anything that others will use, I pull out my autoclave.

Definitely giving me some food for thought. I have always been meticulous about pre-cleaning before tossing them in. The one I use reaches sufficient pressure and temperatures, and the autoclave tape says as much, however if this is something that might be cause for concern in the future I'll put an order in for a larger autoclave/smaller flasks or whatever I need to rectify this asap.

Edit: along with posting proof of the item of course. I will get some crinkled paper dated and signed with meso on it and snap a picture when I get it in.