Making a blend of compounds question

[Thegreek]

Let’s say you wanted this in one syringe.
Don’t worry about the compounds they are irrelevant.
40mg is .4ml
40mg is .4ml
20mg is .2ml
That’s 1ml total volume in a syringe. If I were to take a 10ml vial and load it with the above dosage 10 times I’d have 10 shots of the above. So my question is now that it’s all in one vial. If I were to give it a few swirls then pull 1ml out. Do you think I’d have .4 .4 and .2 in the syringe. Not sure if I explained that right or it makes sense. Just wondering if that would be an easier way of loading a syringe pulling from one vial instead of pulling from each one individually.

 

[Meterman05]

So it sounds like you want to do something that is 100mg/mL of three different compounds? That about right? I don't know if you would be able to take up exactly that amount of space per mL given that you would need some solvents in there.

Just an example if you wanted to do a mix of per mL Test Prop 40mg, Mast Prop 40mg and Tren Acetate 20mg. You would just do a standard recipe for 100mg/mL and add the raw amounts accordingly.

Are you talking about just taking premade things and adding them all to a vial in the amounts? For simplicity if you had three compounds at 100mg each you want to add 4mL, 4mL and 2mL then mix them in the same vial? If that's what you want to do I don't think it would be an issue as long as they are all the same carrier oil. You can mix different carrier oils but to make a homogenous mix I would make sure they are the same carrier. As long as you give it a good shake I think you should be able to get pretty close to what you want to do.

 

[Iron Vett]

Let’s say you wanted this in one syringe.
Don’t worry about the compounds they are irrelevant.
40mg is .4ml
40mg is .4ml
20mg is .2ml
That’s 1ml total volume in a syringe. If I were to take a 10ml vial and load it with the above dosage 10 times I’d have 10 shots of the above. So my question is now that it’s all in one vial. If I were to give it a few swirls then pull 1ml out. Do you think I’d have .4 .4 and .2 in the syringe. Not sure if I explained that right or it makes sense. Just wondering if that would be an easier way of loading a syringe pulling from one vial instead of pulling from each one individually.

Throw it all of those premade oils together and swirl it around a bit after warming it up and you’ll be golden

 

[Thegreek]

So it sounds like you want to do something that is 100mg/mL of three different compounds? That about right? I don't know if you would be able to take up exactly that amount of space per mL given that you would need some solvents in there.

Just an example if you wanted to do a mix of per mL Test Prop 40mg, Mast Prop 40mg and Tren Acetate 20mg. You would just do a standard recipe for 100mg/mL and add the raw amounts accordingly.

Are you talking about just taking premade things and adding them all to a vial in the amounts? For simplicity if you had three compounds at 100mg each you want to add 4mL, 4mL and 2mL then mix them in the same vial? If that's what you want to do I don't think it would be an issue as long as they are all the same carrier oil. You can mix different carrier oils but to make a homogenous mix I would make sure they are the same carrier. As long as you give it a good shake I think you should be able to get pretty close to what you want to do.

Throw it all of those premade oils together and swirl it around a bit after warming it up and you’ll be golden

what’s up @Iron Vett how you been. So essentially when running multiple compounds you would normally fill a syringe with the amount of each one you want to inject. So three different vials of compounds. Draw what you want from each into one syringe and you only pin once. I’m asking if I were to do that on a large scale do you think the dose would be accurate. So if I loaded a vial with the right amount of each compound I needed per day but I put a months worth in that vial would I be getting the same dosage per pin as if I were to do it individually.

 

[Gbro]

what’s up @Iron Vett how you been. So essentially when running multiple compounds you would normally fill a syringe with the amount of each one you want to inject. So three different vials of compounds. Draw what you want from each into one syringe and you only pin once. I’m asking if I were to do that on a large scale do you think the dose would be accurate. So if I loaded a vial with the right amount of each compound I needed per day but I put a months worth in that vial would I be getting the same dosage per pin as if I were to do it individually.

Like he said, heat the vial up and give it a good swirl each time. It will work.

 

[Jstone2]

As long as you mix it well what your trying to achieve is no problem. I have done it in the past when traveling. I save an empty script vial, and when traveling i do this so i only have one vial.

 

[Thegreek]

I was pretty sure I could because it really isn’t much different then actually brewing a blend. I was just worried that for some reason it all wouldn’t come together right. Maybe I’ll try making a 10ml vial just to see how it all comes together and doesn’t separate or crash.

 

[GearGodess]

You guys are over complicating it.

Simply put, you'll inject more BA and BB pulled individually from each vial, you'll have less if you make the blend together when brewed together at higher doses. Smaller pins too. I like blends as long as they are well thought out and customized for your needs.

 

[superbane]

You guys are over complicating it.

Simply put, you'll inject more BA and BB pulled individually from each vial, you'll have less if you make the blend together when brewed together at higher doses. Smaller pins too. I like blends as long as they are well thought out and customized for your needs.

Blends are great! Glad someone else agrees!
One size does not fit all but if you know what you like blends become a game changer!

 

[Thegreek]

You guys are over complicating it.

Simply put, you'll inject more BA and BB pulled individually from each vial, you'll have less if you make the blend together when brewed together at higher doses. Smaller pins too. I like blends as long as they are well thought out and customized for your needs.

I don’t think that’s correct. Wouldn’t it be proportional. I use a standard 1/15-18 when I brew so the BA/BB should match the overall amount of what you draw into the pin. However to make true blends you sometimes need a better solvent. Which might include EO or GU. So I think technically my way would give you less solvents than a true blend.

 

[Kingsmountain]

I don’t think that’s correct. Wouldn’t it be proportional. I use a standard 1/15-18 when I brew so the BA/BB should match the overall amount of what you draw into the pin. However to make true blends you sometimes need a better solvent. Which might include EO or GU. So I think technically my way would give you less solvents than a true blend.

Yeah, that one went over my head as well.

I would assume 2% is 2% regardless.

The only thing I could see being different would be the displacement of the powder(s) being used if you want to get technical about it.

I would guess if you are going to brew a blend and wanted it as perfect as possible, you could do the math with the displacement of each powder to get the total and go from there.

However, I am not a scientist and have never played one on T.V. either so YMMV

 

[Iron Vett]

what’s up @Iron Vett how you been. So essentially when running multiple compounds you would normally fill a syringe with the amount of each one you want to inject. So three different vials of compounds. Draw what you want from each into one syringe and you only pin once. I’m asking if I were to do that on a large scale do you think the dose would be accurate. So if I loaded a vial with the right amount of each compound I needed per day but I put a months worth in that vial would I be getting the same dosage per pin as if I were to do it individually.

Hey @Thegreek I've been doing great. Just getting over the covid 19 which was no more than a pretty mean flu bug. Now this is for some of the other people in this thread that thinks he is trying to brew a blend. He’s not. He’s just wanting to combine three different finished oils and was asking if they would mix homogeneously. And that answer is yes. The finished oils will mix just as proportionally as if they were drawn up into your syringe. I would just heat it up good when they are first combined and swirl to mix. Then you have only one bottle to draw out of for your cycle.

 

[Thegreek]

Hey @Thegreek I've been doing great. Just getting over the covid 19 which was no more than a pretty mean flu bug. Now this is for some of the other people in this thread that thinks he is trying to brew a blend. He’s not. He’s just wanting to combine three different finished oils and was asking if they would mix homogeneously. And that answer is yes. The finished oils will mix just as proportionally as if they were drawn up into your syringe. I would just heat it up good when they are first combined and swirl to mix. Then you have only one bottle to draw out of for your cycle.

Shit man glad you made out ok with everything. Happy to hear you’re doing better now. Yeah that was pretty much what I was getting at. I’ve made a blend or two but they were never really my thing. I’m going start a new cycle soon and I’m going to be microdosing a few compounds that I already made and wanted to take all of them individually and combine them proportionally into one big vial to make it easier to pin. It is pretty much the same as making a blend but for some reason I was having a mental block and something seemed off. Just needed to hear from someone else.