Can you evaporate Benzyl Alcohol

[Gtimes]

Ok Chaps!
So when I brew my own gear I normally put zero Benzyl Alcohol in my mix,as this brings me out in hard lumps and feels like I been kicked by a horse sometimes.
This worked amazing as very smooth and I am quite meticulous with the cleaning.
Thing is there was a problem with my Raw suppliers resulting in me running out of my own home brew.
I bought some Test Prop 10ml bottles from a known lab and obviously it already had Benzyl Alcohol in.
Just 5cc made a rock hard lump and had me with a fever 2 days later.
Question is,can I evaporate the BA from the 10ml bottles or are they all destined to be binned?
Thanks for any advice.

 

[FR0Z3N_B0MB3RRR]

Its strange that s the BA... so strange since BA is used in a very little quantity and is bacteriostatic... prevent bacteria to growth..

You could be allergic to carrier oil , way more likely..

 

[janoshik]

It is most likely completely unrelated to your issue, but the word you are looking for is distillation and benzyl alcohol in anabolic steroid oil is perfectly suited for it!

But that's more of an academic kind of stuff.

 

[Gtimes]

Its strange that s the BA... so strange since BA is used in a very little quantity and is bacteriostatic... prevent bacteria to growth..

You could be allergic to carrier oil , way more likely..

Yes I agree it’s a strange one.
I have used AS for the last 15 years on and off and now part of TRT and frequently had abscesses assell as hard lumps(nearly always) at the site.
Only thing that stops it is no BA.

 

[Gtimes]

It is most likely completely unrelated to your issue, but the word you are looking for is distillation and benzyl alcohol in anabolic steroid oil is perfectly suited for it!

But that's more of an academic kind of stuff.

Sorry buddy,totally lost me on this one,why am I looking for the word distillation?

 

[janoshik]

The process of separating benzyl alcohol from other components by evaporation is called distillation. It will also work well, as benzyl alcohol has much lower boiling point than other components of the oil

 

[Gtimes]

The process of separating benzyl alcohol from other components by evaporation is called distillation. It will also work well, as benzyl alcohol has much lower boiling point than other components of the oil

Ah I see! Thanks for this!
so I could in theory boil the bottles of gear I currently have and that would get rid of the BA?
I did wonder if this would wreck the actual testosterone but guess it’s worth a go if ultimately going in the bin.

 

[janoshik]

Ah I see! Thanks for this!
so I could in theory boil the bottles of gear I currently have and that would get rid of the BA?
I did wonder if this would wreck the actual testosterone but guess it’s worth a go if ultimately going in the bin.

Well, the vapors must have the room to escape (needle through stopper?).

It most absolutely won't wreck testosterone, but I'd say any gear that gives you issues like that is bin-worthy.

 

[Katona]

It is most likely completely unrelated to your issue, but the word you are looking for is distillation and benzyl alcohol in anabolic steroid oil is perfectly suited for it!

But that's more of an academic kind of stuff.

Sorry but that is total bullshit, seems you have no clue about chemistry. Never heat your oil unnesesary when BA is allready in it. Always add BA at the end to the allready cooled oil. Why? Because BA with prolonged heat is oxidizing to benzaldehyde and benzoic acid, thats also the reason why it gets a more yellow tint and begins smelling like pistacia. Benzaldehyde is a nervepoisen when injected!!

 

[janoshik]

Sorry but that is total bullshit, seems you have no clue about chemistry. Never heat your oil unnesesary when BA is allready in it. Always add BA at the end to the allready cooled oil. Why? Because BA with prolonged heat is oxidizing to benzaldehyde and benzoic acid, thats also the reason why it gets a more yellow tint and begins smelling like pistacia. Benzaldehyde is a nervepoisen when injected!!

Not even going to bother over here.

 

[Jstone2]

Sorry but that is total bullshit, seems you have no clue about chemistry. Never heat your oil unnesesary when BA is allready in it. Always add BA at the end to the allready cooled oil. Why? Because BA with prolonged heat is oxidizing to benzaldehyde and benzoic acid, thats also the reason why it gets a more yellow tint and begins smelling like pistacia. Benzaldehyde is a nervepoisen when injected!!

Site your claim, every claim of this requires not just a little heat for the oxidation. Some of the articles on this also now have statements like this:

• 05 August 2020​

  Editor’s Note: Readers are alerted that the reliability of data presented in this manuscript is currently in question. Further editorial action may be taken as appropriate once the investigation into the concerns is complete and all parties have been given an opportunity to respond in full.
  Every study or article speaking on the oxidation has something more than heat involved like:
  

  Understanding of the Oxidation Behavior of Benzyl Alcohol by Peroxymonosulfate via Carbon Nanotubes Activation​

  
  Selective Catalytic Oxidation of Benzyl Alcohol to Benzaldehyde by Nitrates
  
  
  So where is the study that shows heat alone is enough to cause this oxidation. I can not find a single one. I know lots of labs will put everything together and heat it. There is not a buch of us suffering because we have been poisoned.
  
  

 

[Hollow123]

Site your claim, every claim of this requires not just a little heat for the oxidation. Some of the articles on this also now have statements like this:

• 05 August 2020​

  Editor’s Note: Readers are alerted that the reliability of data presented in this manuscript is currently in question. Further editorial action may be taken as appropriate once the investigation into the concerns is complete and all parties have been given an opportunity to respond in full.
  Every study or article speaking on the oxidation has something more than heat involved like:
  

  Understanding of the Oxidation Behavior of Benzyl Alcohol by Peroxymonosulfate via Carbon Nanotubes Activation​

  
  Selective Catalytic Oxidation of Benzyl Alcohol to Benzaldehyde by Nitrates
  
  
  So where is the study that shows heat alone is enough to cause this oxidation. I can not find a single one. I know lots of labs will put everything together and heat it. There is not a buch of us suffering because we have been poisoned.
  

I filter when the brew is warm as well, surviving

 

[Katona]

Site your claim, every claim of this requires not just a little heat for the oxidation. Some of the articles on this also now have statements like this:

• 05 August 2020​

  Editor’s Note: Readers are alerted that the reliability of data presented in this manuscript is currently in question. Further editorial action may be taken as appropriate once the investigation into the concerns is complete and all parties have been given an opportunity to respond in full.
  Every study or article speaking on the oxidation has something more than heat involved like:
  

  Understanding of the Oxidation Behavior of Benzyl Alcohol by Peroxymonosulfate via Carbon Nanotubes Activation​

  
  Selective Catalytic Oxidation of Benzyl Alcohol to Benzaldehyde by Nitrates
  
  
  So where is the study that shows heat alone is enough to cause this oxidation. I can not find a single one. I know lots of labs will put everything together and heat it. There is not a buch of us suffering because we have been poisoned.

You want a study? Why not try it yourself before you are searching for unrelated studies?
Take some MCT put in some BA in an open baker with magnetic stirring, heat to 100 degree Celsius for an hour, and then smell it. Simply as that, you will see yourself, no need for a study.

And here is a source for you too

Time-dependent conversion of benzyl alcohol to benzaldehyde and benzoic acid in aqueous solutions​

• July 2006
• Journal of Pharmaceutical and Biomedical Analysis 41(4):1380-5

DOI:10.1016/j.jpba.2006.02.028

 

[Katona]

Not even going to bother over here.

If you have nothing to say, better be quit.

 

[janoshik]

If you have nothing to say, better be quit.

quiet*

I will leave it to somebody else to call you stupid on the rest.

 

[Katona]

quiet*

I will leave it to somebody else to call you stupid on the rest.

Thats all you can say about this? So you say that you are a shittalker yes? Because you are! But once again heating BA in oil will result in the conversion/oxidation to Benzaldehyde and of course Benzoic acid.
But for you @janoshik ....distilation of BA is done under vacuum, and if you would know what a flashpoint is, then you would find out that the flashpoint of BA is arround 100 °C , at this temperature it starts producing explosive mixtures with air, and destilling without vacuum means distilling at 205 °C which is the boiling point of BA you dump prick, even diesel flashes at arround 250 °C so you are telling people to distill BA with an Oil (with flashpoint in Dieselregion) at 205 °C )

 

[Cashton]

Sorry but that is total bullshit, seems you have no clue about chemistry. Never heat your oil unnesesary when BA is allready in it. Always add BA at the end to the allready cooled oil. Why? Because BA with prolonged heat is oxidizing to benzaldehyde and benzoic acid, thats also the reason why it gets a more yellow tint and begins smelling like pistacia. Benzaldehyde is a nervepoisen when injected!!

Can you tell me which of the two are yellow? Is it the benzaldehyde, or the benzoic acid?

 

[Cashton]

You want a study? Why not try it yourself before you are searching for unrelated studies?
Take some MCT put in some BA in an open baker with magnetic stirring, heat to 100 degree Celsius for an hour, and then smell it. Simply as that, you will see yourself, no need for a study.

And here is a source for you too

Time-dependent conversion of benzyl alcohol to benzaldehyde and benzoic acid in aqueous solutions​

• July 2006
• Journal of Pharmaceutical and Biomedical Analysis 41(4):1380-5

DOI:10.1016/j.jpba.2006.02.028

Jesus fucking Christ, you realize this is probably done with some sort of oxidizing agent or catalyst? Or are you that ignorant? Maybe if you actually read the article you referenced there instead of just the abstract you would know this... fucking chimpanzee...

 

[Cashton]

Thats all you can say about this? So you say that you are a shittalker yes? Because you are! But once again heating BA in oil will result in the conversion/oxidation to Benzaldehyde and of course Benzoic acid.
But for you @janoshik ....distilation of BA is done under vacuum, and if you would know what a flashpoint is, then you would find out that the flashpoint of BA is arround 100 °C , at this temperature it starts producing explosive mixtures with air, and destilling without vacuum means distilling at 205 °C which is the boiling point of BA you dump prick, even diesel flashes at arround 250 °C so you are telling people to distill BA with an Oil (with flashpoint in Dieselregion) at 205 °C )

Have you ever heard of something called Vapour Volatility? You smooth brained fucking retard.

 

[janoshik]

Thats all you can say about this? So you say that you are a shittalker yes? Because you are! But once again heating BA in oil will result in the conversion/oxidation to Benzaldehyde and of course Benzoic acid.
But for you @janoshik ....distilation of BA is done under vacuum, and if you would know what a flashpoint is, then you would find out that the flashpoint of BA is arround 100 °C , at this temperature it starts producing explosive mixtures with air, and destilling without vacuum means distilling at 205 °C which is the boiling point of BA you dump prick, even diesel flashes at arround 250 °C so you are telling people to distill BA with an Oil (with flashpoint in Dieselregion) at 205 °C )

You goddamn smooth brained amoeba.

Flashpoint of ethanol is 12C, boiling point at 78C. Now go tell people it's not possible to distill ethanol with a straight face you baboon.

Now go read something about Dunning–Kruger before you try to appear smart again.