MESO-Rx

Anabolic Steroids

Guangzhou Gemini Biotech Co., Ltd.(USA, International)

canes said:
Ive had conversions with WWB where they mentioned GGB randomly. Was weird, but sounded like they may being sourcing from the same place, were technically the same company, or knew one another. Or all of the above.
Click to expand...
JOHN VS CAVAN... or are they best friends? Hmmmm...
 
dick_starbuck said:
I haven't talked to them yet. Maybe one is the finance guy and the other is the warehouse guy.
Click to expand...
Na. Been buying from wwb a while. Jack is higher up and only deals with big orders/gbs mostly. He will turn you away of you reach out to him. Alex seems like an ops/finance guy that helps out.

Ive sporadically used wwb over a year and half now. Have had good luck so far.
 
Everything came through as expected, and much quicker than expected.

Ended up going with GGB (over WWB) as they are much more responsive to emails, which I prefer for ordering. Orders are always prepared in a spreadsheet which is much easier to copy into an email than trying to wrangle data on a mobile device.

Test E 300 is Hepius/Stromusc, and so are all orals. However, their Sustanon 250 is an unmarked kit, which has an intense smell.

That said, I wanted to ask you all about oils and solvents from CN based resellers. I'm not familiar with Guiacol, but after reading about synthetic solvents, a bit nervous to pin their sustanon.

Can anyone share experiences on using oils from this or similar vendors? Have you had good/bad/no reactions to CN oils?

There have been discussions about this in the SSA thread, and no one can seem to get a straight answer from them, so not sure what to expect here. I've also asked GGB to clarify, and will update this thread with what comes back.
 
sokurovsky said:
Everything came through as expected, and much quicker than expected.

Ended up going with GGB (over WWB) as they are much more responsive to emails, which I prefer for ordering. Orders are always prepared in a spreadsheet which is much easier to copy into an email than trying to wrangle data on a mobile device.

Test E 300 is Hepius/Stromusc, and so are all orals. However, their Sustanon 250 is an unmarked kit, which has an intense smell.

That said, I wanted to ask you all about oils and solvents from CN based resellers. I'm not familiar with Guiacol, but after reading about synthetic solvents, a bit nervous to pin their sustanon.

Can anyone share experiences on using oils from this or similar vendors? Have you had good/bad/no reactions to CN oils?

There have been discussions about this in the SSA thread, and no one can seem to get a straight answer from them, so not sure what to expect here. I've also asked GGB to clarify, and will update this thread with what comes back.
Click to expand...
Im very sure that the kits are just unmarked stromusc. They are similar but not identical to WWB. The GGB kits have black tops with no little arrow, while ths WWB kits have a little arrow.

I noticed also the kits I got from GGB are a little cloudy with wisps of... dust looking contaminent. There was a picture in WWB thread that showed this as well, so this seems to be a common issue? Either way, I filter these kits with a .22 PTFE before use.

The oil does not have Guaicol in it, I would have smelled it. It does have a fair amount of BB and EO though.
 
dick_starbuck said:
I noticed also the kits I got from GGB are a little cloudy with wisps of... dust looking contaminent. There was a picture in WWB thread that showed this as well, so this seems to be a common issue? Either way, I filter these kits with a .22 PTFE before use.
Click to expand...
Thanks for the reply and advice here @dick_starbuck . I had a feeling that this would be the start of my homebrew era. Also going to start making oral suspensions of a few different compounds.

Honestly haven't been filtering peptides, but have long been considering making l-carnitine homebrew, which would require all the same implements needed for filtering oils. Based on your advice and my reaction to the GGB oils (which haven't been injected yet), I'm definitely going to start filtering. I'm new to TRT but have been doing HCG monotherapy to gauge my response, which has been good.

Shopping list is almost complete, but getting stuck on the filters. Assuming 25mm 0.22 would be sufficient? Is Amazon fine for these or is it worth going with a med supply site? Any reccs? (I will also scour the forum.)

Considering doing two vials at once and going into 20ml vials. Planning on using 10ml 18ga syringes for the process. Would you recommend using 20ml or larger syringes? Thanks!
 
sokurovsky said:
Thanks for the reply and advice here @dick_starbuck . I had a feeling that this would be the start of my homebrew era. Also going to start making oral suspensions of a few different compounds.

Honestly haven't been filtering peptides, but have long been considering making l-carnitine homebrew, which would require all the same implements needed for filtering oils. Based on your advice and my reaction to the GGB oils (which haven't been injected yet), I'm definitely going to start filtering. I'm new to TRT but have been doing HCG monotherapy to gauge my response, which has been good.

Shopping list is almost complete, but getting stuck on the filters. Assuming 25mm 0.22 would be sufficient? Is Amazon fine for these or is it worth going with a med supply site? Any reccs? (I will also scour the forum.)

Considering doing two vials at once and going into 20ml vials. Planning on using 10ml 18ga syringes for the process. Would you recommend using 20ml or larger syringes? Thanks!
Click to expand...
I got .22 PTFEs from cobetter. Dont get them from Amazon.
 
Thanks, and really appreciate the context @dick_starbuck

I had the feeling filters shouldn't be the thing to go cheap on, especially where UGL oils are concerned.

readalot said:
Haven't checked the price lately but the 10 pack from Peptide Test were nice (Tisch).
Click to expand...
Just calling out that these are luer slip on the outlet, which would require purchasing additional needles to accommodate. Think I'd prefer to stick to luer lock on inlet/outlet for supply consolidation.

Edit: Checking the needles they sell, it looks like luer locks may be compatible with the luer slip outlets after all:

peptidetest.com

Dynarex Needles 25g 1-1/2"

Sterile, thin-wall needles Color-coded needle hub allows for quick identification of the needle gauge Compatible with luer lock and luer slip syringes Features double bevel design for easy penetration and smooth flow Sterile, non-toxic, non-pyrogenic Not made with natural rubber latex
peptidetest.com peptidetest.com

  • Compatible with luer lock and luer slip syringes
 
Oh and when I asked the source about the oils and solvents used in the Sustanon 250, they simply replied:

Testosterone Proplonate 30mg
Testosterone Isocaproate 60mg
Testosterone Phenylpropionate 60mg
Testosterone Decanoate 100mg

My understanding from @dick_starbuck is that they contain:
  • MCT
  • Benzyl Benzoate
  • Ethyl Oleate
So I'm following up with the source to try to confirm.

Dick - Have you had any rough experiences post injection after filtering? Did you notice any inflammation, either local or systemic? Or had any allergic reactions to the EO?

New to TRT and wondering if going CN UGL was maybe not the best choice for starting. Going to filter either way, but perhaps should have gone with a cleaner source for the first time?

I'm also working with a clinic, so will eventually have some pharma test cyp, but wanted to stock up on sustanon and TE 300 in case ordering gets really tough in the coming months.

UPDATE - Source replied with: "Use Mct oil. BA and BB"
 
how are we doing with the quality of glps? Anyone has tested them as of recently, or any personal experiences?
 
sokurovsky said:
Oh and when I asked the source about the oils and solvents used in the Sustanon 250, they simply replied:

Testosterone Proplonate 30mg
Testosterone Isocaproate 60mg
Testosterone Phenylpropionate 60mg
Testosterone Decanoate 100mg

My understanding from @dick_starbuck is that they contain:
  • MCT
  • Benzyl Benzoate
  • Ethyl Oleate
So I'm following up with the source to try to confirm.

Dick - Have you had any rough experiences post injection after filtering? Did you notice any inflammation, either local or systemic? Or had any allergic reactions to the EO?

New to TRT and wondering if going CN UGL was maybe not the best choice for starting. Going to filter either way, but perhaps should have gone with a cleaner source for the first time?

I'm also working with a clinic, so will eventually have some pharma test cyp, but wanted to stock up on sustanon and TE 300 in case ordering gets really tough in the coming months.

UPDATE - Source replied with: "Use Mct oil. BA and BB"
Click to expand...
They ways say MCT, BB, BA but then whenever jano tests it, it has EO.

I wish I could help you brother but I got this stuff for my stash stock up. Haven't used yet, only filtered.
 
You must log in or register to reply here.

Similar threads

M
Moonlight Pharmaceuticals - EU based
2
Replies
33
Views
4K
AdonisDad
A
Driada Britannica
Driada Medical UK & EU
5 6 7
Replies
126
Views
8K
stevosaurus
stevosaurus
E
ELF-Farm--International-HGH,Peptides, HGH Raws, peptides raws.
2 3
Replies
44
Views
6K
Elf-farm
E
Great Northern Peptides
Great Northern Peptides - Canadian Domestic Peptides
2
Replies
20
Views
883
clearheaded
C
APS Andy
APS National Day Promotion
Replies
0
Views
62
APS Andy
APS Andy

Sponsors

Latest posts

Back
Top