MESO-Rx Sponsor Genuine Steroid Powder Manufacturer-AASraw

[pipo]

I ordered 3kg test e, 1kg deca, and 100g NPP several weeks ago. They offered me a refund a couple weeks ago. I have opted to wait a little bit longer since nearly nobody has stock now anyway.

How much he asked for 1 kg of test if you buy this amount?

 

[AASraw]

We are in the new stage of peptides. For high quality peptides, you are welcome to contact us.

NAD 100mg/vial
HGH10iu/vial
Selank 5mg/vial
GHK Cu 50mg/vial
Sermorelin 5mg/vial
Kisspeptin 10mg/vial
Adipotide (FTPP) 5mg/vial
Thymosin α1 5mg/vial
Tesamorelin 5mg/vial
AOD9604 5mg/vial
Semaglutide 5mg, 10mg, 50mg
Tirzepatide 5mg, 10mg, 20mg, 15mg. 60mg
retatrutide 5mg

 

[Pounds23]

We are in the new stage of peptides. For high quality peptides, you are welcome to contact us.

NAD 100mg/vial
HGH10iu/vial
Selank 5mg/vial
GHK Cu 50mg/vial
Sermorelin 5mg/vial
Kisspeptin 10mg/vial
Adipotide (FTPP) 5mg/vial
Thymosin α1 5mg/vial
Tesamorelin 5mg/vial
AOD9604 5mg/vial
Semaglutide 5mg, 10mg, 50mg
Tirzepatide 5mg, 10mg, 20mg, 15mg. 60mg
retatrutide 5mg

Lol think we're fully and totally covered on peptides, the issue seems to be with aas raws

 

[Rakusa]

Last time I checked with you guys reta was crazy expensive, like not considering buying it at all. why is that? what's the price for a kit of 5mg now?

 

[Heavy Iron]

I have pre ordered from another vendor.

I would be cautious with this. A lot of these vendors don't have the actual power to potentially deliver. Most times they're waiting on someone who is waiting. Hopefully it comes through! I brewed up my last half key of cyp before I knew all this was going down. I would have bought a fuck ton if I was still on meso and in the loop.

 

[HillbillyHeisenberg]

I would be cautious with this. A lot of these vendors don't have the actual power to potentially deliver. Most times they're waiting on someone who is waiting. Hopefully it comes through! I brewed up my last half key of cyp before I knew all this was going down. I would have bought a fuck ton if I was still on meso and in the loop.

I’ll be alright either way. I don’t spend more than I can afford to lose.

 

[HillbillyHeisenberg]

How much he asked for 1 kg of test if you buy this amount?

When I placed the order I think it was $800/kg. I have vendors quoting $1100/kg now. Crazy.

 

[HillbillyHeisenberg]

yeh you really are heisenberg

did they give you any estimate or time frame?

June 25 they said they might know something in 2 weeks. Haven’t gotten an update yet.

 

[alquimist]

There is an Indian source selling it as aasraw, the prices are fair, but it seems scam to me, I got it from another Indian source and took a scamThey are aware that we are after material, I took a hit already from another Indian supplier, it seems that it is very common the practice there you can't trust

 

[HillbillyHeisenberg]

There is an Indian source selling it as aasraw, the prices are fair, but it seems scam to me, I got it from another Indian source and took a scamThey are aware that we are after material, I took a hit already from another Indian supplier, it seems that it is very common the practice there you can't trust

I have ordered from AASraw but the AASraw I ordered from came from China. They are a vendor on this forum.

 

[BazzBeat]

Melting point of products below

Oxymetholone: 178–180°C
Testosterone Isocaproate: 52–54°C
Testosterone Phenylpropionate: 112–117°C
Testosterone Enanthate: 34–39°C
Nandrolone Decanoate (Deca): 33–37°C
Nandrolone Phenylpropionate: 93–99°C

Why Melting Point Matters in Gear Preparation

As a bodybuilder, if you care about smooth injections, stable vials, and pain-free cycles, melting point is one of the key chemical properties to know — especially if you’re brewing or sourcing underground.

1.Solubility in Oil

Lower melting point = easier to dissolve in carrier oils like MCT, GSO, or EO.

Example: Test E (MP ~34°C) melts like butter — very easy to work with at low temps.

High MP esters like TPP (~115°C) or NPP (~95°C) need more heat to fully dissolve and stay stable.

2.Crash Risk

Ever had a vial crystalize or get cloudy in the fridge or winter? That’s the compound crashing out of solution.

Compounds with high melting points + high doses + poor solvents = crash city.

Avoid this by knowing the MP and adjusting oil type, solvent ratios (BB/BA), and brewing temp.

3.Filtering Temps

High MP compounds need to stay warm during filtering (0.22 μm sterile filter), or they’ll clog the filter or crash mid-process.

You’ll lose product and clog filters = wasted time and money.

4. Injection Pain & PIP

If your brew isn’t fully dissolved, microcrystals form in muscle tissue = post-injection pain (PIP) or even sterile abscess.

High MP compounds are more prone to this if underdosed, under-heated, or made with weak solvents.

5.Brew Potency Limits

Knowing MP helps decide how high you can dose a compound.

Some esters (like Deca or Test E) can go up to 300–400 mg/mL with ease.

Others (like NPP or TPP) crash above 100–150 mg/mL without solvents or EO.

Dissolution point ≠ melting point!

 

[BazzBeat]

Melting point of products below

Oxymetholone: 178–180°C
Testosterone Isocaproate: 52–54°C
Testosterone Phenylpropionate: 112–117°C
Testosterone Enanthate: 34–39°C
Nandrolone Decanoate (Deca): 33–37°C
Nandrolone Phenylpropionate: 93–99°C

Why Melting Point Matters in Gear Preparation

As a bodybuilder, if you care about smooth injections, stable vials, and pain-free cycles, melting point is one of the key chemical properties to know — especially if you’re brewing or sourcing underground.

1.Solubility in Oil

Lower melting point = easier to dissolve in carrier oils like MCT, GSO, or EO.

Example: Test E (MP ~34°C) melts like butter — very easy to work with at low temps.

High MP esters like TPP (~115°C) or NPP (~95°C) need more heat to fully dissolve and stay stable.

2.Crash Risk

Ever had a vial crystalize or get cloudy in the fridge or winter? That’s the compound crashing out of solution.

Compounds with high melting points + high doses + poor solvents = crash city.

Avoid this by knowing the MP and adjusting oil type, solvent ratios (BB/BA), and brewing temp.

3.Filtering Temps

High MP compounds need to stay warm during filtering (0.22 μm sterile filter), or they’ll clog the filter or crash mid-process.

You’ll lose product and clog filters = wasted time and money.

4. Injection Pain & PIP

If your brew isn’t fully dissolved, microcrystals form in muscle tissue = post-injection pain (PIP) or even sterile abscess.

High MP compounds are more prone to this if underdosed, under-heated, or made with weak solvents.

5.Brew Potency Limits

Knowing MP helps decide how high you can dose a compound.

Some esters (like Deca or Test E) can go up to 300–400 mg/mL with ease.

Others (like NPP or TPP) crash above 100–150 mg/mL without solvents or EO.

In oil with BA TPP dissolves already at 40–50°C

 

[HillbillyHeisenberg]

In oil with BA TPP dissolves already at 40–50°C

Don’t argue with ChatGPT!!

 

[BazzBeat]

Don’t argue with ChatGPT!!

This is not my knowledge. My friend did test pp this way. Because for a long time he was suffering from many problems. All his test pp were with pip. Then he decided to buy raw materials and cook in this way. At that time there was no GPT chat.

 

[BazzBeat]

Don’t argue with ChatGPT!!

II I find the raw materials I will try to do it myself. and I will definitely tell you

 

[AASraw]

There is an Indian source selling it as aasraw, the prices are fair, but it seems scam to me, I got it from another Indian source and took a scamThey are aware that we are after material, I took a hit already from another Indian supplier, it seems that it is very common the practice there you can't trust

AASraw India is scammer, we does not authorize any resellers， only ourselves. You are right that there are many scammers in India. Please be careful.

 

[AASraw]

Dissolution point ≠ melting point!

Thank you for your new information. I will look deep into it.

 

[BazzBeat]

Thank you for your new information. I will look deep into it.

Answer me please dm

 

[Sammy_Jenkis]

Has anyone pre ordered from this vendor very recently? I’m looking for an educated guesstimate on the time frame for production. Any experience or insight is appreciated!!

 

[AASraw]

New arrivals :

HCG 5000iu/vial
HGH 10iu/vial
GHK-cu 50mg/vial