MESO-Rx Sponsor Primal Pharma - US Domestic

[readalot]

if you only want “sterile,” 160–180 degrees works. If you want sterile + low endotoxin, you run about 250 degrees depyrogenation, which is why our numbers are higher.

You are quoting your numbers in deg C?

Excellent work mentioning endotoxin standards and raising the topic.

 

[Primal_Pharma]

You are quoting your numbers in deg C?

Yes sorry, Celsius. Editing now

 

[Primal_Pharma]

What bottletop filters are you using?
How are you sterilizing them?

PVDF hydrophobic sterile bottletop filters, single-use. Each unit comes pre-sterile from the manufacturer (validated under ISO standards)

 

[readalot]

Yes sorry, Celsius. Editing now

Thank you. Appreciate you sharing the info.

For those interested...

Sterilization vs. Depyrogenation - Pharma Topics

Sterile pharmaceutical manufacturing demands absolute control over microbial and endotoxin contamination. Two essential processes ensure product safety—sterilization and depyrogenation. While they sound similar, they serve fundamentally different purposes. So, like always here’s a simplified...

pharmatopics.com

Critical Fact: Standard sterilization (121°C steam or 0.22 µm filtration) does NOT destroy endotoxins. A product may be microbially sterile but still pyrogenic!

 

[Photon]

PVDF hydrophobic sterile bottletop filters, single-use. Each unit comes pre-sterile from the manufacturer (validated under ISO standards)

It's a clear one piece bottle top filter setup?
I would ask for a brand but for opsec reasons it might not be the best to do so.

 

[Bandern]

How quickly this man went from tight shirts that beautifully hug the biceps to “I wanna swim in my clothes like a wigger in 2003”

(I’m here for it all, for the record)

Once you achieve Actually Big status you must participate in the spiritual war against 160lb larpers

A better tomorrow for our children means Gasp and excessively baggy Spice Girls t shirts not smediums and short shorts

Inshallah, we will win

 

[Primal_Pharma]

Once you achieve Actually Big status you must participate in the spiritual war against 160lb larpers

A better tomorrow for our children means Gasp and excessively baggy Spice Girls t shirts not smediums and short shorts

Inshallah, we will win

 

[Photon]

PVDF hydrophobic sterile bottletop filters, single-use. Each unit comes pre-sterile from the manufacturer (validated under ISO standards)

Would you consider upgrading them? Your bottle top filters are made of polystyrene which does not work well with MCT BB BA. The filter is PVDF which is fine but the holding area and everything else is polystyrene which leeches when exposed to MCT BA BB.

Ideal setup is .2 PTFE with polypropylene. The bottle bottle top is not clear plastic. I believe these do not come pre sterilized.

Let me know if you need chemical compatibility tables.

 

[AllGoodThings]

160lb larpers in smediums and short shorts

 

[Primal_Pharma]

Would you consider upgrading them? Your bottle top filters are made of polystyrene which does not work well with MCT BB BA. The filter is PVDF which is fine but the holding area and everything else is polystyrene which leeches when exposed to MCT BA BB.

Ideal setup is .2 PTFE with polypropylene. The bottle bottle top is not clear plastic. I believe these do not come pre sterilized.

Absolutely would. Please DM me. Let me also confirm with brewer to make sure we’re still using those

 

[Bandern]

 

[Dial It In]

Would you consider upgrading them? Your bottle top filters are made of polystyrene which does not work well with MCT BB BA. The filter is PVDF which is fine but the holding area and everything else is polystyrene which leeches when exposed to MCT BA BB.

Ideal setup is .2 PTFE with polypropylene. The bottle bottle top is not clear plastic. I believe these do not come pre sterilized.

Let me know if you need chemical compatibility tables

Would you consider upgrading them? Your bottle top filters are made of polystyrene which does not work well with MCT BB BA. The filter is PVDF which is fine but the holding area and everything else is polystyrene which leeches when exposed to MCT BA BB.

Ideal setup is .2 PTFE with polypropylene. The bottle bottle top is not clear plastic. I believe these do not come pre sterilized.

Let me know if you need chemical compatibility tables.

Dang might go 2 for 2 on those stoppers

 

[roofer22]

@Primal_Pharma
Any plans to make 5mg Accutane?

 

[713HTX]

@Primal_Pharma
Any plans to make 5mg Accutane?

Just curious why the super low dose? 20mg daily is decently “low dose” for longer duration of time. I will say that 40mg accutane from Primal will have you dry and chapped so I know it works. I used Pharma grade 30mg accutane and wasn’t too bad on dryness but for me the 40mg was drying me out quite a bit more as it should I guess. Not sure if you can cut them in half and make 10mg from splitting a 20mg cap. They are more like a gel type pill and not the normal cap that’s filled with powder. But I’m not 100% sure. I’ve never attempted to cut them in half. They are kinda soft and sticky.

 

[dcfreak]

Another successful Primal TD, and another great CS experience. Thanks again.

Looking forward to the Pale Ale drop

 

[Primal_Pharma]

We have highest available Tuta plan you can possibly have and they just hit us with a ‘you have sent too many emails, please try again later.’ After doing some digging, a lot of the times it is a false positive and we should be good to go in a day or so.

But it is genuinely sad how hard it is to find a decent emailing service. If anyone has any suggestions, please DM us. If you don’t receive any emails for the rest of the day, it’s because of this. So we are genuinely sorry…

 

[dick_starbuck]

Pack landed today! I didnt receive a tracking email, so I was a little surprised. I thought it might just not have shipped yet due to volume of orders.

Everything looks great except... all my orals are crushed lol. The medication bottle style is cool but not structurally sound. Some of them are legit flattened.

Its all good though, pills are intact.

 

[AllbrandNew]

We have highest available Tuta plan you can possibly have and they just hit us with a ‘you have sent too many emails, please try again later.’ After doing some digging, a lot of the times it is a false positive and we should be good to go in a day or so.

But it is genuinely sad how hard it is to find a decent emailing service. If anyone has any suggestions, please DM us. If you don’t receive any emails for the rest of the day, it’s because of this. So we are genuinely sorry…

UPDowngrade. I don't have any (better) suggestions, but that is some grade A BS right there.

 

[Primal_Pharma]

Pack landed today! I didnt receive a tracking email, so I was a little surprised. I thought it might just not have shipped yet due to volume of orders.

Everything looks great except... all my orals are crushed lol. The medication bottle style is cool but not structurally sound. Some of them are legit flattened.

Its all good though, pills are intact.

First time this has ever happened. Flattened but still intact? Mind sending some pictures via DM? Would like to fix this!

 

[sionnach]

We have highest available Tuta plan you can possibly have and they just hit us with a ‘you have sent too many emails, please try again later.’ After doing some digging, a lot of the times it is a false positive and we should be good to go in a day or so.

But it is genuinely sad how hard it is to find a decent emailing service. If anyone has any suggestions, please DM us. If you don’t receive any emails for the rest of the day, it’s because of this. So we are genuinely sorry…

This is to keep spammers from using their service, but it's wild you're getting hit for it on a paid account. What did tuta support say?