MESO-Rx Sponsor Primal Pharma - US Domestic

Violet Top HGH tip:

A few days ago someone posted about the vial cap on the Violet HGH coming apart when they flipped the plastic disc off.

I had the same thing happen on my first bottle. Last night I reconstituted a second vial and the same thing happened. I noticed 2 score marks in the aluminum after readalot posted about tear away vial caps.

I filter into a new vial, so the cap tearing didn't make any difference to me.

However, I did try to remove it without tearing by lining up my thumb with the 2 score marks and push up and away from them, thinking it might shear less.

That didn't make the cap come off any cleaner.

If you have the violet tops incoming, maybe prepare to transfer the solution to a new vial.

The stopper did keep its vacuum after I tore the cap off.

Will the vacuum be enough to keep the stopper in without the cap? No. The vacuum will be broken when you add volume with bac water.

Can you just hold the stopper in place by holding it with your fingers? Yes.

If you aren't going to transfer to a new vial, it does seem feasible to just hold the stopper with your fingers.

Or, if the aluminum mangles a bit, but does not come all the way off, just leave it in place .

View attachment 347770
There's only 12 iu in there. For most folks that's only 2 or 3 days of pins to load. This put my mind at ease, thank you.
 
"Complete a cycle" after 2 years?

I don't think so Dorian Grey. There's a reason folks are more interested in "stocking up" on rHGH than almost any other compound.

First 6 months after stopping GH:

View attachment 347700
Lmao! I was tired last night.
What I mean to say is I wanted to do at least two years of it then reassess. I didn’t want to stop right now at the halfway mark..In my head you need two years of it to see full benefits. I know at my age (40s) I could run it for the rest of my life as long as I don’t over do the dosing
 
I got time, and I also have another (tested) bottle of T Cyp 50 from another vendor (tested at 49.xx) so I’m not particularly stressed about it at the moment.

Personally I'd buy from a vendor enough for ~5 years worth.
Put them all into a 100ml (Which can usually store 110ml) vial and then test 1ml from that vial.

You can probably then store it in the fridge, and take out 10ml and put into a new vial each time you need it, and never have to worry about it ever again.

For females, the dosing accuracy is very important. I'd not trust any 3rd party or vendor testing for that matter.
 
Violet Top HGH tip:

A few days ago someone posted about the vial cap on the Violet HGH coming apart when they flipped the plastic disc off.

I had the same thing happen on my first bottle. Last night I reconstituted a second vial and the same thing happened. I noticed 2 score marks in the aluminum after readalot posted about tear away vial caps.

I filter into a new vial, so the cap tearing didn't make any difference to me.

However, I did try to remove it without tearing by lining up my thumb with the 2 score marks and push up and away from them, thinking it might shear less.

That didn't make the cap come off any cleaner.

If you have the violet tops incoming, maybe prepare to transfer the solution to a new vial.

The stopper did keep its vacuum after I tore the cap off.

Will the vacuum be enough to keep the stopper in without the cap? No. The vacuum will be broken when you add volume with bac water.

Can you just hold the stopper in place by holding it with your fingers? Yes.

If you aren't going to transfer to a new vial, it does seem feasible to just hold the stopper with your fingers.

Or, if the aluminum mangles a bit, but does not come all the way off, just leave it in place .

View attachment 347770

That looks like the cap type that says “flip off” on top with a couple arrows. I have some other peptides with that cap style. You can definitely rip it all the way off if you’re not careful. I flip the cap up and then wiggle it side to side until it breaks off. You can hold your finger against the backside where those cuts are to help keep it from tearing through.
 
Could you share the pH of this?

Yeah, let me talk to the team and see how/when we can get that done
@Primal_Pharma did you get an answer on this? I couldn’t find a previous answer.

Has anyone else tried the Carnitine yet? I tried it for the first time yesterday in the quad. . . Ouch. I’ve never tried Carnitine before so maybe just a bad quad placement. I’ll try VG next time. The carnitine thread in the homebrew section doesn’t have a consensus on wether it needs the ph adjusted or not, so maybe some people are just sensitive to carnitine?
 
@Primal_Pharma did you get an answer on this? I couldn’t find a previous answer.

Has anyone else tried the Carnitine yet? I tried it for the first time yesterday in the quad. . . Ouch. I’ve never tried Carnitine before so maybe just a bad quad placement. I’ll try VG next time. The carnitine thread in the homebrew section doesn’t have a consensus on wether it needs the ph adjusted or not, so maybe some people are just sensitive to carnitine?

pin IM
 
@Primal_Pharma did you get an answer on this? I couldn’t find a previous answer.

Has anyone else tried the Carnitine yet? I tried it for the first time yesterday in the quad. . . Ouch. I’ve never tried Carnitine before so maybe just a bad quad placement. I’ll try VG next time. The carnitine thread in the homebrew section doesn’t have a consensus on wether it needs the ph adjusted or not, so maybe some people are just sensitive to carnitine?
Thanks for bringing this up. I was just told "If you’re compounding an injection, target the 6 to 6.5ph range. That’s what the FDA-labeled product uses."

But we don't have a test on it so that will be something we get done.
 
@Primal_Pharma did you get an answer on this? I couldn’t find a previous answer.

Has anyone else tried the Carnitine yet? I tried it for the first time yesterday in the quad. . . Ouch. I’ve never tried Carnitine before so maybe just a bad quad placement. I’ll try VG next time. The carnitine thread in the homebrew section doesn’t have a consensus on wether it needs the ph adjusted or not, so maybe some people are just sensitive to carnitine?
Carnintine should carry a PH around 6.4 or so. Several studies indicate as PH climbs to around 7.5 some injection pain starts to show
 
That looks like the cap type that says “flip off” on top with a couple arrows. I have some other peptides with that cap style. You can definitely rip it all the way off if you’re not careful. I flip the cap up and then wiggle it side to side until it breaks off. You can hold your finger against the backside where those cuts are to help keep it from tearing through.
I thought the point was to rip it off. I have some CN oils like that I just tore it off.
 
Carnintine should carry a PH around 6.4 or so. Several studies indicate as PH climbs to around 7.5 some injection pain starts to show

I use 6.4 for my glutathione and carnitine, both @700mg/ml+.
pip free, daily 1ml shot each.

Korea Pharma glutathione when reconstituted with bac also has a pH of 6.4.
pip free too.

I've heard that there's no need to adjust pH for carnitine tho, so I probably won't be next time (im lazy) lol
 
I use 6.4 for my glutathione and carnitine, both @700mg/ml+.
pip free, daily 1ml shot each.

Korea Pharma glutathione when reconstituted with bac also has a pH of 6.4.
pip free too.

I've heard that there's no need to adjust pH for carnitine tho, so I probably won't be next time (im lazy) lol
Have you noticed a skin bleaching effect from taking that much Glutathione?
 

Sponsors

Latest posts

Back
Top