OEP LABS Domestic

[OEP LABS]

Anyone here ever dilute their oils? I have some of OEPs Ment 100 but intend to start very low and was thinking of diluting it down to 50mg/ml.

I see this Ultra Filtered MCT (Miglyol 810/812) at MedLab and it would seem that would work. Is it safe to assume that since it’s “ultra filtered”, I can simply combine it with my Ment 100 in a separate sterile vial without any additional filtering?

Here’s what I’m thinking of buying:

Ultra-Filtered MCT Oil:

Ultra Filtered MCT Oil 60/40 (Medium Chain Triglyceride), 50ML

$13.69, Ultra Filtered Pharmaceutical MCT Oil: contains Omega-3, is Vegan, Non-GMO, gluten free, kosher certified, Thermogenic; spares lean body tissue. Ships discrete and direct to you door

www.medical-and-lab-supplies.com

10ml Sterile Evacuated Vial:

10mL Clear Sealed Sterile Evacuated Vial, Qty 1

10mL Clear Sterile Evacuated Vials Ultra Spec evacuated vials are produced by aluminum caps, non-latex butyl lyophilized stoppers and Type I glass vials. They are sterile and vacuum internally. The production process is carried out under strict Class 100

www.medical-and-lab-supplies.com

No pls dont Just combine. Its need be pushed or vacuumed through a membrane

 

[crispybacon!]

No pls dont Just combine. Its need be pushed or vacuumed through a membrane

Ok. So probably not something I want to diy. Or is there a straightforward way for me to cut my ment concentration in half?

It’s not a huge deal, I just plan to start dosing at 5mg, which seem like it would be easier if the concentration were lower.

 

[OEP LABS]

Ok. So probably not something I want to diy. Or is there a straightforward way for me to cut my ment concentration in half?

It’s not a huge deal, I just plan to start dosing at 5mg, which seem like it would be easier if the concentration were lower.

Just use slin pins with the iu increments convert the iu to the mgs done

Because you might come into an issue needin. More bb

 

[Elektrobot]

Anyone here ever dilute their oils? I have some of OEPs Ment 100 but intend to start very low and was thinking of diluting it down to 50mg/ml.

I see this Ultra Filtered MCT (Miglyol 810/812) at MedLab and it would seem that would work. Is it safe to assume that since it’s “ultra filtered”, I can simply combine it with my Ment 100 in a separate sterile vial without any additional filtering?

Here’s what I’m thinking of buying:

Ultra-Filtered MCT Oil:

Ultra Filtered MCT Oil 60/40 (Medium Chain Triglyceride), 50ML

$13.69, Ultra Filtered Pharmaceutical MCT Oil: contains Omega-3, is Vegan, Non-GMO, gluten free, kosher certified, Thermogenic; spares lean body tissue. Ships discrete and direct to you door

www.medical-and-lab-supplies.com

10ml Sterile Evacuated Vial:

10mL Clear Sealed Sterile Evacuated Vial, Qty 1

10mL Clear Sterile Evacuated Vials Ultra Spec evacuated vials are produced by aluminum caps, non-latex butyl lyophilized stoppers and Type I glass vials. They are sterile and vacuum internally. The production process is carried out under strict Class 100

www.medical-and-lab-supplies.com

If you are looking to "micro dose" it and concerned that there isn't enough volume to push it through a syringe and needle, maybe combine some 50mg cyp or TNE in the same syringe?

 

[Wildcard781]

Okay here are I go posting pastebin gettin pms ans emails but we are gettin close to opening date so I’ll be posting more often as i promised so those folks don’t miss the date. No date yet but it’s coming real soon.


View: https://pastebin.com/bxcTKS79

 

[cap’nboldenone]

We have a brick in route. Let’s fullsend it then

 

[OEP LABS]

Midday Men, touching base with all as we get closer to the date, the mishap on TRA batch 1 set us back partially. Not badly though as the other TRA batch 2 sample is already inflight .

Iv been receiving some questions in regards to the second batch of TRA will it be ready for Opening Day. The rough approximation of the Open Date was initially set around Nov 21, 2025, let us not forgot we are awaiting the TD-2 Purity Report as well therefore the date was a rough estimation. In my opinion due to the demand of TRA here this forum, I believe we should wait as well for the TRA purity report on Batch 2. Thankfully I had a second batch lined up the anabolic Gods were looking over us that day. Would like the Community's input on that.
Let me remind everyone that my friend showed me the purity report for this batch already as it was 94-95% but for the transparency of it all so there is zero question in anyone's mind I resent it for testing. I could work it using his report as well.

I cleaned up the pastebin and anadrol is not on it due to the the low quantity of it. Its basically out of stock. Once gone my plans were not to restock it, but for the community demand I will do my best to acquire it . I will touch base with my oldest vendor tonight the availability of it for the future to come. Here is the updated pastebin with the TRA blend batch 1(phuck it ill pin it) on it as well along with testing links within the pastebin.

Another Note real quick during Opening Day to make everything flow easily any invoices please send only to my secure email, the oldest email on the pastebin. I know some folks are on telegram and tuta but by doing this, for me will increase speed and therefor will increase speed for you as well.
Please any thoughts, suggestions or concerns I will be here in and out.


View: https://pastebin.com/Hfyj8Kv1

 

[Whistles77]

Midday Men, touching base with all as we get closer to the date, the mishap on TRA batch 1 set us back partially. Not badly though as the other TRA batch 2 sample is already inflight .

Iv been receiving some questions in regards to the second batch of TRA will it be ready for Opening Day. The rough approximation of the Open Date was initially set around Nov 21, 2025, let us not forgot we are awaiting the TD-2 Purity Report as well therefore the date was a rough estimation. In my opinion due to the demand of TRA here this forum, I believe we should wait as well for the TRA purity report on Batch 2. Thankfully I had a second batch lined up the anabolic Gods were looking over us that day. Would like the Community's input on that.
Let me remind everyone that my friend showed me the purity report for this batch already as it was 94-95% but for the transparency of it all so there is zero question in anyone's mind I resent it for testing. I could work it using his report as well.

I cleaned up the pastebin and anadrol is not on it due to the the low quantity of it. Its basically out of stock. Once gone my plans were not to restock it, but for the community demand I will do my best to acquire it . I will touch base with my oldest vendor tonight the availability of it for the future to come. Here is the updated pastebin with the TRA blend batch 1(phuck it ill pin it) on it as well along with testing links within the pastebin.

Another Note real quick during Opening Day to make everything flow easily any invoices please send only to my secure email, the oldest email on the pastebin. I know some folks are on telegram and tuta but by doing this, for me will increase speed and therefor will increase speed for you as well.
Please any thoughts, suggestions or concerns I will be here in and out.


View: https://pastebin.com/Hfyj8Kv1

Minor error in text of the phuckit blend. Think last line should read Tr-en Ace 18mg/ml.

 

[OEP LABS]

Minor error in text of the phuckit blend. Think last line should read Tr-en Ace 18mg/ml.

thank you sir, let me revise

 

[OEP LABS]

Thank you @Whistles77 good eye sir, disregard the misspelled words or hyphens going around the pastebins smart filters is taxing.


View: https://pastebin.com/4aKgBVRU

 

[AllbrandNew]

Let me remind everyone that my friend showed me the purity report for this batch already as it was 94-95% but for the transparency of it all so there is zero question in anyone's mind I resent it for testing. I could work it using his report as well.

Wait for your own reports, IMO. You've come this far with everything else by trying to do things right, knowing it'd initially cause some delays, and I think there's no harm in knowing exactly what you're working with before brewing each and every time.

 

[AlexDavis43]

Thank you @Whistles77 good eye sir, disregard the misspelled words or hyphens going around the pastebins smart filters is taxing.


View: https://pastebin.com/4aKgBVRU

My man, one of the nice things about pastebins is that you can just update the existing one without creating a new one

That way we can just bookmark it, and see the updates in real time (and don't need to keep setting new bookmarks)

 

[CHIEF M]

Midday Men, touching base with all as we get closer to the date, the mishap on TRA batch 1 set us back partially. Not badly though as the other TRA batch 2 sample is already inflight .

Iv been receiving some questions in regards to the second batch of TRA will it be ready for Opening Day. The rough approximation of the Open Date was initially set around Nov 21, 2025, let us not forgot we are awaiting the TD-2 Purity Report as well therefore the date was a rough estimation. In my opinion due to the demand of TRA here this forum, I believe we should wait as well for the TRA purity report on Batch 2. Thankfully I had a second batch lined up the anabolic Gods were looking over us that day. Would like the Community's input on that.
Let me remind everyone that my friend showed me the purity report for this batch already as it was 94-95% but for the transparency of it all so there is zero question in anyone's mind I resent it for testing. I could work it using his report as well.

I cleaned up the pastebin and anadrol is not on it due to the the low quantity of it. Its basically out of stock. Once gone my plans were not to restock it, but for the community demand I will do my best to acquire it . I will touch base with my oldest vendor tonight the availability of it for the future to come. Here is the updated pastebin with the TRA blend batch 1(phuck it ill pin it) on it as well along with testing links within the pastebin.

Another Note real quick during Opening Day to make everything flow easily any invoices please send only to my secure email, the oldest email on the pastebin. I know some folks are on telegram and tuta but by doing this, for me will increase speed and therefor will increase speed for you as well.
Please any thoughts, suggestions or concerns I will be here in and out.


View: https://pastebin.com/Hfyj8Kv1

Pench whipping up these masterpiece brews

 

[OEP LABS]

Wait for your own reports, IMO. You've come this far with everything else by trying to do things right, knowing it'd initially cause some delays, and I think there's no harm in knowing exactly what you're working with before brewing each and every time.

Let us put it in stone then. Done.

My man, one of the nice things about pastebins is that you can just update the existing one without creating a new one

That way we can just bookmark it, and see the updates in real time (and don't need to keep setting new bookmarks)

Thank you my dude. I’m certain I have a login and will try it. Must’ve been the smart filters that distracted me trying different paths to make it work. But I got you

 

[TanFishMan]

So if I mix a bottle of the phck it blend with a bottle of test cyp 250. The result would be 140test 42tren per ml blend? 3mls a week roughly 420test/126tren.

 

[OEP LABS]

So if I mix a bottle of the phck it blend with a bottle of test cyp 250. The result would be 140test 42tren per ml blend? 3mls a week roughly 420test/126tren.

I will be completely honest my man. The milligrams on the blend is what is in the blend. In which path you decide to use it that is solely on you to do the precise math

 

[Whistles77]

So if I mix a bottle of the phck it blend with a bottle of test cyp 250. The result would be 140test 42tren per ml blend? 3mls a week roughly 420test/126tren.

Correct assuming the TC comes from OEP (ie 12ml)

 

[AllbrandNew]

Can't be hanging at the bottom of the page, so I'll just note that the TD500 has continued to be smooth as butter.

 

[Oldhand]

Can't be hanging at the bottom of the page, so I'll just note that the TD500 has continued to be smooth as butter.

Good eye, good eye.

I’m itching like a crack fiend here waiting in the opening.

 

[AbsoluteKnight]

Can't be hanging at the bottom of the page, so I'll just note that the TD500 has continued to be smooth as butter.

Also will note tried the winstrol suspension expecting it to be bitter but it tastes like what pepto bismol wishes it tasted like without the bubblegum so a pleasant surprise
First time ever taking winstrol did 22mg pre workout holy fuck I’m pretty sure all my lifts went up by a few reps at less if not by weight.