MESO-Rx
Anabolic Steroids
Blitzschnell - Fast, secure & reliable - EU Source
- Thread starter Blitzschnell
- Start date
Testo E 250 and Testo E 400 are done already, were labeling them right now. Theyre both going out to Janoshik today or tomorrow.
Yeah insanity, basicly i just put a Kilo of Testo E inside in 2-3 big parts and it was just melting into the mix and i even reduced BB by 3%.
dinfar1337
Member
just remember let bb stay between 20-25 im going closer to 25% in this cold weather to avoid crashes
very simple 2% ba and that range is the smoothest shit ive ever injected. you'll have extremely very satisfied customers.
I know bro, but 25% is a bit much for my taste, maybe for the higher dosed stuff. But not for Testo E 250. Especially since Mig812N has exceptional solubility compared to other oils, also against Mig and Mig812
Gotta say i made Testo E with 18% BB yesterday, 250mg/ml and let it outside at i think -8C and it didnt crashed, atleast not overnight. Sure with Testo D 500 thats a different story.
I guess its the Mig812N. Because before i just surely more BB. Just want to keep it as low as possible. Its basicly the unhealthiest part in it.
I guess its the Mig812N. Because before i just surely more BB. Just want to keep it as low as possible. Its basicly the unhealthiest part in it.
Wanna hear the joke of the day? Even i use @dinfar1337 calculator, i idiot entered the wrong Raw amount! Congrats, i made Testo E 300 instead of E 400. My genius is frightening. Atleast i have a new Apex product now lol.
And i can sell my idiocity as transparency i guess. I cannot believe what i have done. It was my last Testo E, so i cannot even remix it.
But would sound better to blame @dinfar1337 right @Venom Lab ? Its his fault or what do you think?
Batchnumber will be: TE-Idiot300 lol
And i can sell my idiocity as transparency i guess. I cannot believe what i have done. It was my last Testo E, so i cannot even remix it.
But would sound better to blame @dinfar1337 right @Venom Lab ? Its his fault or what do you think?
Batchnumber will be: TE-Idiot300 lol
Thought contacting directly would be better and faster, and the real one for some reason doesn't appear to me on the
Yeah i have a case with TG Support already, hope they dont bann me because they found out what im selling. But even then, i would not let a faker just take customers.
Also directly report him as fake account. Sent me the proof and write me the order number, if you have one, in private. Maybe Signal or here as message. I will see what i can do.
But also i have to repeat, i mean i have a wonderful website, automated in many parts, with warehouses who work directly with the backend to minimize delivery time. Please guys, dont write me in general on TG or Signal, to order there.
Soon will come a PGW that allows all crypto currencies and a workaround with Transak to make thinks more convinient.
How do I contact you directly?
Directly or Blitzschnell.66 on Signal. Email is bombed at the moment, so i cannot open the Emailprogram, will be fixed soon
dinfar1337
Member
Yes you should make an idiot warning for every weight "Did you idiot weight it correctly? Yes/No"
But atleast i have a labelprinter and can sell it now before tests even, as Testo E 300. Thats something.
dinfar1337
Member
there was also this idiot guy who wanted me to add low bb warnings.
do you guys think this is a fulltime job hehe? i can make your requests if u want since u donated me but that guy can fuck off
Photon
Member
call me nuts but i actually stopped using bb for non PWO
as long as it holds for 48 hours its good to pin imo
i use 1/0
heat, shake, pin
even test d at 550+ mg/ml is gtg
everything is smooth once heated
obviously vendors cant do this because everything will crash during shipping lol
And there you are, thinking that you know everything. But yeah, not doable as vendor, but interesting to hear.
Bro if youre doing exceptional stuff, people expecting exceptional stuff
Welcome on board.
dinfar1337
Member
i believe you
i live in denmark
its around 0 to -5 celsius these cold months and forward to may.
im on bunch of steroids and i sweat if i dont have a fan turned on in my room pointing at me so my room is cold asf.
i use 25bb maybe because im lazy but ive done down to 10bb without crashing.
maybe i just had way too much theory before starting homebrewing in start of 2025 but i laugh at all these guys running into trouble. from my first brew i never really had any issues, its super fucking simple and easy.
we're makin it easy for vendors with all the info you sampei and me are putting out and now my calc aswell. cant believe theres still shit vendors although many have caught on aswell.
happy for the ones who caught on and are making quality gear now. theres come a few solid options for domestics on eu and usa domestic market now
Last edited:
Bro you have -5 at the moment? In Denmark? Damn thats much warmer than here.
Haha bro coldness is good for you. All my guys that work for me say its cold like you come into the devils lair. But not because i sweat but because youre more focused in cold, i swear it is. Maybe im just not a so pigmented like you lol.
25% BB come on bro, i mean thats surely easy to use for everything, but the goal should be to reduce this to a minimum. I mean sure, in winter its better. But BB isnt good after all, compared to the other substances. I mean basicly its the same talk with EO. Also Mig812N, not Mig812 and surely not MCT, has much higher solubility because its just extra fine and pure. So i try to use this to reduce as much BB to get a stable product, without any non neccessary BB in it.
Hehe but its true, i like to work with you, @Sampei and @Venom Lab and sharing infos. After all you fuckheads made me do it. I swear if police ask me one day, why i have a lab with 50kg Raws and 20k empty vials and all this mashines, i will tell them. This fuckheads made me do it
But seriously, even if you have all the info, you have to have also some skills, some standards, some protocol and some willpower. Ah and i forgot: Some money and connections. Dont treat it like everyone can do it. Sure, everyone can brew 100ml Testo in their kitchen, that maybe result in heavy infections.
And yeah, i make some quality gear now, i think my tests speak for themselfs and i passed sterility testing, which i miss at many vendors, to be honest. I would never did it, if some of you guys wouldnt push me to do it, i was just curious.
I mean look at this! Even without cap and label, how shiny they are. And the tests will be as shiny as they are outside. Beautiful bathroom, or not?
Now BB is the bad guy. That's a new one. It will be added to the list with EO. BB is fine, EO is fine. Don't start another bullshit theory that has no evidence behind it. I started a conversation to the contrary about EO some time ago, and no one has managed to tell me why EO is bad. As long as it's used in pharma, it's fine. BB also.
If I were a steroid user (I am), I would be more concerned about the drug that I'm taking and my lifestyle than if it has 25% BB.
Don't praise yourself so much. Anyone, and I mean literally anyone, can brew. Just follow some steps and rules. For someone who has never done it, it might sound like you put a man on Mars, but it's no big deal.
For example, someone who didn't know anything about brewing last year is now running a UGL. It's too simple. It shouldn't be that way, but it is.
For your buyers and other UGL buyers, you look like a scientist, but it's just mixing some stuff and filtering it, in short.
You don't need a significant amount of money nor special connections to start brewing for yourself and not pay $40 for a bottle of test when you can make that for $5. With $500, you can buy the necessary equipment to start brewing and test raws to take a bottle of test for 2 years.
I'm saying this because I have seen you are overexcited in several posts about what you made. That doesn't inspire confidence that you know what you are doing. It screams, "I somehow managed to make something."
Be more professional in every regard. Or not. It's your image, how you want to be perceived.
If I were a steroid user (I am), I would be more concerned about the drug that I'm taking and my lifestyle than if it has 25% BB.
Don't praise yourself so much. Anyone, and I mean literally anyone, can brew. Just follow some steps and rules. For someone who has never done it, it might sound like you put a man on Mars, but it's no big deal.
For example, someone who didn't know anything about brewing last year is now running a UGL. It's too simple. It shouldn't be that way, but it is.
For your buyers and other UGL buyers, you look like a scientist, but it's just mixing some stuff and filtering it, in short.
You don't need a significant amount of money nor special connections to start brewing for yourself and not pay $40 for a bottle of test when you can make that for $5. With $500, you can buy the necessary equipment to start brewing and test raws to take a bottle of test for 2 years.
I'm saying this because I have seen you are overexcited in several posts about what you made. That doesn't inspire confidence that you know what you are doing. It screams, "I somehow managed to make something."
Be more professional in every regard. Or not. It's your image, how you want to be perceived.
Similar threads
Sponsors
Latest posts
-
Sry Lab (Peptides, SARMS，Steroids)-International & Domestic Shipping
- Latest: ParquetPatquet
-
-
-
