AlphaGear Source

[AlphaGear]

Thanks ample. Actually, I'm not going to ignore your post. I've already spent hours reading into PGP. I have some OCD and I want to fully understand it and use the best method possible. I have a decent understanding of how it works but I want to pick the best method/program of doing this. I'll have it set up today at some point.

Board name: This has been kind of low on my priority list to be honest. I've been very busy lately just staying caught up here and responding to everyone (PMs, emails etc.).

References: I did all of my business locally up until now. I am not aware of any local customers being members here but I could ask around. I am not going to ask people to join here on my behalf. In my opinion, no references is better than a slew of new users randomly popping up on my behalf.

Anavar: I have ONE bottle of Var left. It's an expensive oil. It's typically priced at $40 per 40mL bottle. I didn't even post this on my list because I only have one left and planned on using it personally. But I could survive without it. Of course, it goes through the same testing as everything else.

International shipping: at this point, I don't have any plans of shipping internationally. Sorry about any inconveniences!

AG

 

[AlphaGear]

*expensive compound, not oral.

 

[swole4ever]

I had forgot about this page and just came back to it. In the draft of code of conduct the question was presented as pictures of your lab. I saw some pics posted of syringes, gear, sealer, filtration etc. To be honest with you that is not pictures of a lab setup. That is pictures of your equipment, I can post pics like that too.

No one even mentioned anything about it, the pics were just accepted. Anyway my response doesn't carry any weight around here. I only work for a facility that has the largest research complex in the country.

Hell I am trying to figure out how to approach one of those guys to have them test my powder for purity. My only stumbling block will be the language barrier, I have no idea how anyone communicates with any of those people since they are from all over the world and barely speaks any English.

 

[03xx52]

I had forgot about this page and just came back to it. In the draft of code of conduct the question was presented as pictures of your lab. I saw some pics posted of syringes, gear, sealer, filtration etc. To be honest with you that is not pictures of a lab setup. That is pictures of your equipment, I can post pics like that too.

No one even mentioned anything about it, the pics were just accepted. Anyway my response doesn't carry any weight around here. I only work for a facility that has the largest research complex in the country.

Hell I am trying to figure out how to approach one of those guys to have them test my powder for purity. My only stumbling block will be the language barrier, I have no idea how anyone communicates with any of those people since they are from all over the world and barely speaks any English.

It's cool that you work for Cummings research park...I would try and get your hands on some nmr and cg equipment to test your powders.
Back to the source it would be nice to have everything set up in an area that you will make everything. Then a take a pic of everything set up and ready to go. From the way that you present yourself it seems like you know a bit about what your doing.

 

[AlphaGear]

Yeah I do. I believe if you can't test your own raws, you have no business handling them.

I can try to get a complete set up pic taken. Although, there are different stations for different stages.

Most people seemed most interested in seeing pics of my filters, to ensure I'm using them at the appropriate size so there won't be any sterility issues. I did my best to provide what I thought was asked.

Some of the larger pieces of equipment don't belong to me. But, I have full reign to use them outside of "business hours". There is some info on them that would reveal more than I would like to reveal and expose my location. I could edit or blur these pics but I would like to leave them unedited, aside from cropping or resizing.

People have begun placing orders. I never asked anyone to purchase anything from me. I'm not even giving out samples yet. But, I'm also not going to refuse business to those who feel comfortable ordering from me. I know they'll be returning customers and I'm providing the best UGL gear available. So I'm assuming reviews will slowly surface.

I'm trying to provide as much info as possible without providing anything comprising by mistake.

 

[pumpingiron22]

autoclave?

 

[Voltrader]

Now throwing your "last bottle" of Var that you were saving for yourself probably got you some interest. I almost PM'ed you.:drooling:

 

[AlphaGear]

PI22 - It is one of the methods I use. I am looking into purchasing a "mobile" version of one that I will own myself, as the larger ones are several thousand. But first, I want to ensure they work just as well. I don't want to use something that I can't trust.

Volt - I haven't personally tried the Var yet. I was excited to start it this cycle. I will be getting larger amounts of it for now on because it moves fast. I wasn't aware that people were having such a difficult time sourcing it. I have tried the Adrol and Dbol so far personally.

There are a handful of items I usually have on hand that I didn't list. I didn't list them originally because I am sold out. It's a learning experience sometimes. When it comes to what items will be the most popular.

A few things I will make sure to have on hand soon will be Var, Tren E, NPP, Superdrol, HCG and Albuterol.

In the future, once I'm more trusted, feel free to ask if I am able to carry anything you may be having a hard time finding. Also, I have made blends before and plan on carrying a bulk and a cut blend soon. I can take requests for blends as well. I'll let you know if I am able to make the exact blend you want. I won't make something unless I'm completely comfortable with the compounds/dosage. None of you will be guinea pigs. I leave that to myself and a couple close friends lol.

AG

 

[Test3_KD]

Now throwing your "last bottle" of Var that you were saving for yourself probably got you some interest. I almost PM'ed you.:drooling:

Yeah.. did I mention my Birthday is this week? lol

 

[pumpingiron22]

I will test you var for sure :drooling: my day around the corner too.
More intersted in the test e and tren e:drooling::drooling::drooling:

 

[Test3_KD]

I will test you var for sure :drooling: my day around the corner too.
More intersted in the test e and tren e:drooling::drooling::drooling:

Haha.. Bday presents sounds like a great way to start your business here

 

[pumpingiron22]

 

[AlphaGear]

Hmm.. I'm still kind of waiting for the general consensus to allow me to send out a few samples.

I'll have the PGP set up by tonight. I know that's one of the things people are still waiting on.

My Var.... I was so excited too lol. It's motivation to restock at least.

AG

 

[Oregongearhead]

I can assure you, and everyone else, that you'll never receive an item from a "bad batch" from me. I do run a small sample of each item. I choose multiple random bits of each compound, mostly because I have pretty annoying OCD.

I test the melting and boiling points closely to verify they are on the mark. I also test the density and solubility. Some tests performed are the GC-MS, TLC and HPLC. These are actually pretty standard/basic tests.

I am able to determine the purity within <.05% difference. At the minimum, I start out with compounds that are 98% pure. I have an extremely reliable source, but, since I am responsible for the finished product, I don't give them the benefit of the doubt. Yes, I trust them. But, science and testing never lies. Which is why I encourage those who run my products to get blood work done (it's important for other reasons too, as I'm sure you all know).

AG

^^^^ Man that sounds all so good , your hitting all the right notes too ....I think I need a hankie theres a tear in my eye ! Goodluck !!

 

[Bigfire]

Hell I know you have received numerous pms about samples. Send them out to the one's you choose and let's see how it goes. I mean if you are waiting for a unanimous vote you may be waiting awhile. The one thing about Meso you aren't going to get your hand held. I figure jump in and sink or swim!!

 

[1fnprick]

This guy has me wanting to start cycle early lol.

 

[AlphaGear]

^Haha thank you! I did make an error in that post and wasn't able to edit it once I noticed.

I am able to verify the purity within <0.25% of a mg. So basically, if I find something to be 98% pure, it's verified to be between 97.75-98.25%.

I did a poor job of explaining it initially.

AG

 

[AlphaGear]

There were a couple people in particular I was hoping would pop up in this thread, but they haven't yet. People who seem to have a popular and trusted opinion around here.

But you're right. I will be picking a few people soon and contacting them to see if they're interested. I just need to take a little time out to select people I believe will be best suited to give an honest and reliable opinion. I will choose out of the people who have posted in this thread, so no random people pop up wanting to review my samples after receiving them.

AG

 

[Test3_KD]

I feel the same way, this guy seems to be putting fourth an effort and doing this thing the correct way. Hope you are ready for the volume of business that will come your way here at MESO and best of luck to you bro.

 

[03xx52]

This thread is about to explode with dudes wanting samples haha. I work in a lab and have some ability to test for cantamination and in the coming weeks I will be able to do some mass spec and nmr reasearch.