MESO-Rx
Anabolic Steroids
bacteriostatic water?
- Thread starter akiravp82
- Start date
https://www.kinkymedical.net
Oh - my bad....
[)]
Just google it. I dont think its illegal to have that. Or just mix 1%BA to steril water is the same thing...
Oh - my bad....
[)]Just google it. I dont think its illegal to have that. Or just mix 1%BA to steril water is the same thing...
I know your aware of this BBC, so don't take my rant personally,lol!
Bacteriostatic water has a preservative (usually benzyl alcohol) added to it, which INHIBITS bacterial growth once opened. Sterile water or saline are sterile, but any ADDITIVE must be listed per FDA guidelines. The difference are significant as for instance once opened sterile saline or water have a shelf life of 3-4 days, yet bacteriostatic water the shelf life is extended to one month.
The available BA "concentrates" are between 50-99% BA. To achieve a one percent "bacteriostatic water" solution, mix 0.1ml to 9.9ml of sterile water using the 99% BA or 0.2mls
of a 50% solution into 9.8mls of sterile water.
Bacteriostatic water has a preservative (usually benzyl alcohol) added to it, which INHIBITS bacterial growth once opened. Sterile water or saline are sterile, but any ADDITIVE must be listed per FDA guidelines. The difference are significant as for instance once opened sterile saline or water have a shelf life of 3-4 days, yet bacteriostatic water the shelf life is extended to one month.
The available BA "concentrates" are between 50-99% BA. To achieve a one percent "bacteriostatic water" solution, mix 0.1ml to 9.9ml of sterile water using the 99% BA or 0.2mls
of a 50% solution into 9.8mls of sterile water.
NO.. I was not aware. The only bac water I have ever seen is 1% BA. I have never seen any king of water mixed with anything other than BA called Bac water, and I did not know that any preparation greater than 1% was used...!?!?
And friendly bak-ach-a, I would like to see some of the products you are referring to. If you have a link of examply I can research.. Should I consider the NOTION of bacteriostatc water GENERIC? Really, I dont TECHINCALLY KNOW.?
Typically, the water I have seen in Presentations that typically come with HCG solutions are BAC 1%BA.
You are correct in pointing out the PRESERVATION FACTOR. BAC water will not sterilize, nor prevent any significant contaminant from taking hold. Its merely a safety precaution AS WELL AS an anesthetic(AT that concentrate/1% and for steroid or typical medical application). Try pinning some HCG without BAC water and you may see what I mean. Think of the video with the fool letting his bud drive a gold ball into his gut with a 9 degree big bertha LOL.. It hurts believe it or not...
But it does not sterilize. For that matter, niether does alcohol really as many things live right through the exposure. Thats a big nasty secret.. Its just a glorified CLEANING AGENT to help the cotton swab do its job TO DETACH AND PHYSICALLY REMOVE THE CONTAMINANTS. Betadine is really better suited for killing anything on the skin. Why this is not publicized should even point out the SERIOUSNESS of the dangers societly has placed its self in allowing these "antibacterial" soaps on the market. Consider Betadine as the latest and greatest "Surgical only antibiotic" when it comes to cleansing the skin - Like IV Clendymyiacyn used to be sorta.
You are kinda of confusin with your numbers down there. I think I get what you are after but...
You also I think pointed out the BAC water could be as high as 50% BA!?!?!?!? Thats newz to me, and it sounds to me like you are in a LABORATORY mindset on that one. I cant imagine any human application greater than the 5% they put in typical injectible steroids. While I have often and still do disagree that any post injection pain is related to the BA at only 5%, I DO agree that it could possible cause some tissue disruption in concoctions greater than 10% for sure. I would be shocked if anyone could stand even a 30% solution injected IM, and God forbid any leaching to general circulation on that dose, so again I am thinking you are referring from a VERY techincal standpoint no so related to direct medical human application. But please, REGALE ME...
And friendly bak-ach-a, I would like to see some of the products you are referring to. If you have a link of examply I can research.. Should I consider the NOTION of bacteriostatc water GENERIC? Really, I dont TECHINCALLY KNOW.?
Typically, the water I have seen in Presentations that typically come with HCG solutions are BAC 1%BA.
You are correct in pointing out the PRESERVATION FACTOR. BAC water will not sterilize, nor prevent any significant contaminant from taking hold. Its merely a safety precaution AS WELL AS an anesthetic(AT that concentrate/1% and for steroid or typical medical application). Try pinning some HCG without BAC water and you may see what I mean. Think of the video with the fool letting his bud drive a gold ball into his gut with a 9 degree big bertha LOL.. It hurts believe it or not...
But it does not sterilize. For that matter, niether does alcohol really as many things live right through the exposure. Thats a big nasty secret.. Its just a glorified CLEANING AGENT to help the cotton swab do its job TO DETACH AND PHYSICALLY REMOVE THE CONTAMINANTS. Betadine is really better suited for killing anything on the skin. Why this is not publicized should even point out the SERIOUSNESS of the dangers societly has placed its self in allowing these "antibacterial" soaps on the market. Consider Betadine as the latest and greatest "Surgical only antibiotic" when it comes to cleansing the skin - Like IV Clendymyiacyn used to be sorta.
You are kinda of confusin with your numbers down there. I think I get what you are after but...
You also I think pointed out the BAC water could be as high as 50% BA!?!?!?!? Thats newz to me, and it sounds to me like you are in a LABORATORY mindset on that one. I cant imagine any human application greater than the 5% they put in typical injectible steroids. While I have often and still do disagree that any post injection pain is related to the BA at only 5%, I DO agree that it could possible cause some tissue disruption in concoctions greater than 10% for sure. I would be shocked if anyone could stand even a 30% solution injected IM, and God forbid any leaching to general circulation on that dose
, so again I am thinking you are referring from a VERY techincal standpoint no so related to direct medical human application. But please, REGALE ME...I know your aware of this BBC, so don't take my rant personally,lol!
Bacteriostatic water has a preservative (usually benzyl alcohol) added to it, which INHIBITS bacterial growth once opened. Sterile water or saline are sterile, but any ADDITIVE must be listed per FDA guidelines. The difference are significant as for instance once opened sterile saline or water have a shelf life of 3-4 days, yet bacteriostatic water the shelf life is extended to one month.
The available BA "concentrates" are between 50-99% BA. To achieve a one percent "bacteriostatic water" solution, mix 0.1ml to 9.9ml of sterile water using the 99% BA or 0.2mls
of a 50% solution into 9.8mls of sterile water.
Last edited:
Well really if the BA dilution was ALREADY 1% how would you achieve a 1% solution when mixed with plain sterile water? If would have to be at least two percent. Just Google "BUY BENZYL ALCOHOL" OR go to ... Charkit.com. click on the spec section aside each listing some are indeed
99.% Not for personal consumption, lol!
99.% Not for personal consumption, lol!
Goodness I'm NOT implying anything more than 2-3% is for HUMAN consumption, by any route, but for industrial application ONLY!
Wake up, BBC!
What is it you are wanting or needing to do fella?
Ok, I get that. Yes you would have 99.1 or whatever.
Well really if the BA dilution was ALREADY 1% how would you achieve a 1% solution when mixed with plain sterile water? If would have to be at least two percent. Just Google "BUY BENZYL ALCOHOL" OR go to ... Charkit.com. click on the spec section aside each listing some are indeed
99.% Not for personal consumption, lol!
It is 5% standard in Test Cyp....
I'm not attempting to imply that your lightheartedness is flying over my head. I am pointing out the error, cause I really think you may be presenting you thought construct from a SUPER-INTROVERTED perspective - Which is dangerous in a forum delivering info laymen. IMHO. Pehaps I am missing something? I would not have gone on about it if it were not the high degree of my inability to interpret what you are saying. Or you are covering up for ignorance perhaps. i would lean toward ignorance from either a laboratory standpoint, and perhaps even an academic role/ perhaps even a doc out of his field.. Still, if haveing to place money I would still go with med or pre med student even. But you are growing. LOL But I am not saying stupid by any means. I know pretty much what you are and do not discount that. I am not certain at this point. I have done my self-designated job. All good...
Your Avatar is a step in the RIGHT direction - for me
I'm not attempting to imply that your lightheartedness is flying over my head. I am pointing out the error, cause I really think you may be presenting you thought construct from a SUPER-INTROVERTED perspective - Which is dangerous in a forum delivering info laymen. IMHO. Pehaps I am missing something? I would not have gone on about it if it were not the high degree of my inability to interpret what you are saying. Or you are covering up for ignorance perhaps. i would lean toward ignorance from either a laboratory standpoint, and perhaps even an academic role/ perhaps even a doc out of his field.. Still, if haveing to place money I would still go with med or pre med student even. But you are growing. LOL But I am not saying stupid by any means. I know pretty much what you are and do not discount that. I am not certain at this point. I have done my self-designated job. All good...
Your Avatar is a step in the RIGHT direction - for me
Goodness I'm NOT implying anything more than 2-3% is for HUMAN consumption, by any route, but for industrial application ONLY!
Last edited:
What? I clearly pointed out the BA must be mixed (diluted) to achieve a 1% or 2% solution, the concentration used in essentially all injectable AAS, which is why most are inquiring about the product. Agreed their are some bozo's who will choose the oral or rectal approach for administration but their beyond help regardless of explicit instructions to the contrary. That's analgous to writing bold faced letters HOT on McDonalds coffee cups to circumvent burns, which was attempted in the northwest several years back (after a several million dollar suit was filed) yet MORE people burned themselves AND the plantiffs attorneys, in the second suit, claimed VERY HOT would have been more effective, lol!
Hey BBC I take it you don't believe my new avatar is "unprofessional or offensive", then right?
This dialoge is not unlike Chevy Chases impersonation of a politic being interviewed giving a PRESSintation in the Movie Spies Like Us....
I really have to wonder sometimes, and this post is in response to reading some other stuff prior as well.. WTF.. I really wonder. It doesn't take any more than the average reader to see where the "pages of time and space get ripped right out"..
I really have to wonder sometimes, and this post is in response to reading some other stuff prior as well.. WTF.. I really wonder. It doesn't take any more than the average reader to see where the "pages of time and space get ripped right out"..
Spaces of time ....
Were you able to locate KK or are you still admiring my fine Avatar. Now that was a primary concern when I thought of using the Avatar. I mean really I KNOW that pic will bring the masses to my posts but will they ever READ EM?, LOL!
Were you able to locate KK or are you still admiring my fine Avatar. Now that was a primary concern when I thought of using the Avatar. I mean really I KNOW that pic will bring the masses to my posts but will they ever READ EM?, LOL!
Sure pick some up at a local pharmacy and tell them you need a 1-2% STERILE BENZYL ALCOHOL SOLUTION. It should be available in either 1or 5 ml vials. CALL the pharmacies FIRST and ask them for the product if they ask just tell em it's for mixing with HCG (but the dilutent was not included upon your purchase).
It's not controlled or a prescription product mate! If you intend to use the HCG in the next 48 hours then STERILE SALINE or STERILE WATER IS FINE! However if ya INTEND to use the HCG over the course of several weeks you need a 1-2% solution mate! Let me know how it goes fella!
It's not controlled or a prescription product mate! If you intend to use the HCG in the next 48 hours then STERILE SALINE or STERILE WATER IS FINE! However if ya INTEND to use the HCG over the course of several weeks you need a 1-2% solution mate! Let me know how it goes fella!
OHH- Boil some damn water and let it cool. get the finest Distilled water money can buy. Be sure to do it in a proper, clean , and safe peice of cookware that a sane person would eat out of. Nothing escapes enough heat for long enough. 5mins at rolling boil. Keep clean while cooling so boil with lid on and dont take off till its cool.
Pin that shit and report back so we can see if that 1% would have served as an anesthetic for YOU. Dont worry, the golfball effect dont last more than a day or two.
...
And FYI, What Jim was saying, is if you plan to refrigerate, it may be safer to have the 1% BA in there, otherwise do what I said.
IF YOU MAKE IT CLEAN
IF YOU KEEP IT CLEAN
IF YOU ARE CLEAN
IF YOU UNDERSTAND KLLEEEAANN
It will stay clean./
SHEEEEEITT.
Pin that shit and report back so we can see if that 1% would have served as an anesthetic for YOU. Dont worry, the golfball effect dont last more than a day or two.
...And FYI, What Jim was saying, is if you plan to refrigerate, it may be safer to have the 1% BA in there, otherwise do what I said.
IF YOU MAKE IT CLEAN
IF YOU KEEP IT CLEAN
IF YOU ARE CLEAN
IF YOU UNDERSTAND KLLEEEAANN
It will stay clean./
SHEEEEEITT.
Last edited:
Just make it
Similar threads
- Question
