capping t3.. any ideas/advice??

[elitesales305]

this shit is so low dose.. seems like its gonna be a mission..
no scale that goes into mcgs.. and dont have a capper yet..
what have u guys tried out there?

 

[LordSamuilo]

Dont do it , your playing russian roulette! There's a reason ull never see a lab sell t3 in caps . The margin of error you have to play with is so small that even if you had the capabilities to make a 100% homogeneous blend (which you dont) with your filler/active ingredient , it still wouldn't be accurate because each cap packs slighy different ! So one cap could end up having 0mcg active and the next cap quit a bit more than is safe to take .

Pharma t3 is dirt cheap , and some things just aren't worth making yourself to save a few dollars. T3 is probably right at the top of that list !

 

[elitesales305]

fuck... now wat do I do with the 8 pounds of raw ??
j/k
this shit is that risky huh..
fuck I was looking and its like 25mcg to 75 mcg a day..

 

[elitesales305]

ohh and @LordSamuilo @MisterSuperGod thanks for the input on that other stuff...
it seems like its good 2 go..

 

[AnTabolic73]

I wonder if a solution would work? If you take 10mgs and dissolve it in 100ml of everclear, that's 100mcg per ml. So half an ml would be 50mcg. 0.1mL would be 10mcg and so on and so forth.

I have a mg scale. I don't know how accurate it is or what's the margin of error.

 

[elitesales305]

^^^^ that's what I was thinking .. suspension this shit!!

 

[LordSamuilo]

I wonder if a solution would work? If you take 10mgs and dissolve it in 100ml of everclear, that's 100mcg per ml. So half an ml would be 50mcg. 0.1 10mL would be 10mcg and so on and so forth.

I have a mg scale. I don't know how accurate it is or what's the margin of error.

Yea that would be safer than caps , and research companys commonly make it in a solution . But still risky working with raw t3 without a respirator, lab suit ect . Not a risk id take when you can buy a 100 tabs of pharma for 25$ , but it can definitely be made in a solution .

this shit is that risky huh..

Yeah its serious as a heart attack .... literally! Or a stoke or coma . At the best case senerio a t3 overdose is gonna give some butual tachycardia and ull probably feel like your gonna die . Im not lecturing or anything I just dont wanna see anyone fuck their self up .

 

[AnTabolic73]

^^^^ that's what I was thinking .. suspension this shit!!

It would be a solution. It wouldn't require shaking. I dunno if t3 remains active or stable in everclear. I'm just speaking theoretically

 

[elitesales305]

Yea that would be safer than caps , and research companys commonly make it in a solution . But still risky working with raw t3 without a respirator, lab suit ect . Not a risk id take when you can buy a 100 tabs of pharma for 25$ , but it can definitely be made in a solution .


Yeah its serious as a heart attack .... literally! Or a stoke or coma . At the best case senerio a t3 overdose is gonna give some butual tachycardia and ull probably feel like your gonna die . Im not lecturing or anything I just dont wanna see anyone fuck their self up .

u just don't want me to get more shredddddedd than u are..
j/k I hear ya.. I gotta see wtf I'm gonna do with this

 

[saucier]

If you are going to do a solution, at least pick up some Ora Plus on Amazon.

 

[LordSamuilo]

u just don't want me to get more shredddddedd than u are..
j/k I hear ya.. I gotta see wtf I'm gonna do with this

For what its worth ud have to take a fair amount of it to really fuck you up to the point it would cause serious health risks . Most likely ud just end up with a racing heart and be nauseous as mf'r . Just really pay attention to detail and be as accurate as humanly possible and you will be fine . Its just not something to take lightly is more what i was getting at than anything

 

[AnTabolic73]

For what its worth ud have to take a fair amount of it to really fuck you up to the point it would cause serious health risks . Most likely ud just end up with a racing heart and be nauseous as mf'r . Just really pay attention to detail and be as accurate as humanly possible and you will be fine . Its just not something to take lightly is more what i was getting at than anything

You take tiromel? I got some from a source here and it didn't do much. I thought it was either expirrd/damaged(I've read t3 is sensitive and goes bad quickly) or fake.

 

[elitesales305]

gonna pour the whole bag on the table and slide into the t-hole!!

 

[LordSamuilo]

You take tiromel? I got some from a source here and it didn't do much. I thought it was either expirrd/damaged(I've read t3 is sensitive and goes bad quickly) or fake.

Yeah i use tiromel , but i dont really use it as a fat burner . Its really not a stand alone fat burner , its better served for just keeping you're metabolism going while your dieting down to keep from stalling out . I dont go over 50mcg usually or i just end up overeating anyways lol . Clen cardio and diet is really what does the bulk of the work , and t3 just supplements them. But t3 alone isnt gonna do anything miraculous , even at higher doses you'll just look flat and be starving constantly for a small tdee increase .

 

[master.on]

this shit is so low dose.. seems like its gonna be a mission..
no scale that goes into mcgs.. and dont have a capper yet..
what have u guys tried out there?

I did

Get the tiniest eyeglass screwdriver you can find, preferably less than 2 mm wide

Place T3 in the fridge so it won't degrade and won't dust either (read below)

use the tiny screwdriver as a spatula to draw just 1 mg of powder (ain't that hard, try to imagine it as just slightly bigger than 1 cubic mm)

carefully pour the powder in a small bottle with 40 ml of ethyl alcohol, as concentrated as you can
use a small bottle (50 or 100 ml) so you can even dip the screwdriver in the alcohol, so it washes clean of T3 powder.

Personally, I prefer to swirl it instead of shaking it.

After shaking/swirling it thoroughly
allow to sit for a couple hours to make sure no powder precipitates, thus effectively a solution and not a suspension.

thus 25 mg/ml
1 mg = 1000 mcg

Discard after about 2 weeks and brew again, brewing is so easy (maybe even easier than brewing coffee).
While it still retains some potency after 3-4 weeks, likely some has already degraded as it clearly feels a bit less potent.

1 g = 1000 mg
so, supposing you discard the rest every single week, 1 g is enough for 1000 weeks = about 18 years of T3 use!

As for safety,
gloves and dust masks have worked well for me
but you can wear a respirator and goggles if you want.
T3 doesn't freeze so the fridge helps a lot to prevent it from dusting.

I'm planning on pouring a bit of T3-alcohol liquid on capsules with filler and allow them to dry but:
1 alcohol needs to be really dry, 95% or mayben even 100% (absolute alcohol) so water won't weaken the capsules.
2 I still need to determine T3 solubility in alcohol as caps just can hold a fraction of a ml
3 I admit I've been lazy as (short-lived) liquid is so easy to brew and effective.

Dont do it , your playing russian roulette! There's a reason ull never see a lab sell t3 in caps . The margin of error you have to play with is so small that even if you had the capabilities to make a 100% homogeneous blend (which you dont) with your filler/active ingredient , it still wouldn't be accurate because each cap packs slighy different ! So one cap could end up having 0mcg active and the next cap quit a bit more than is safe to take .

Pharma t3 is dirt cheap , and some things just aren't worth making yourself to save a few dollars. T3 is probably right at the top of that list !

Some pharma T3 actually comes in capsules

https://www.doctoralia.com.mx/medicamento/triyotex-56330

 

[TRT]

this shit is so low dose.. seems like its gonna be a mission..
no scale that goes into mcgs.. and dont have a capper yet..
what have u guys tried out there?

If your set on caping it find something similar to the powder consistency and mix and mix and mix. Me and Masteron had a conversation about and mixer sizes a while ago. Without getting into that you can cap it and send it off to get a few caps tested.to see if your accurate.
I'd suspend it though. Much safer.

 

[LordSamuilo]

Some pharma T3 actually comes in capsules

Yeah I dont doubt it , but im pretty sure a pharma company has quit a bit better equipment and capabilities than joe blow capping pills at his kitchen table with a 20$ jewlery scale , a motar an pestle and some cheap gel caps...

 

[Sk8man101]

I never fuck with micrograms.

Goodluck op! Stay safe man.

 

[Plate Smacker]

I am in the same dilemma but with 1g of Pramipexole I have for emergency.

I don't think Ora-Plus is a good idea. It is meant to keep oral in suspension, but can still let clumps accumulate.

I suspended 300mg cialis in distilled water and Ora-Plus, and there are small clumps in the syringe when drawing. Very small, but I can see them. Some bigger than others.

Probably because I did not follow exact directions of creating a paste first.

A small clump of T3 or Prami could be brutal.
Even after a warm bath and shaking, multiple times, still small clumps.

Mainly because Ora-Plus is a suspension, it does not actual dissolve anything.
I am a "pics or it never happened" type guy, so here it is before expelling into container.
1ml = 10mg

 

[Plate Smacker]

There it sits, bottom left. I use an oral syringe for drawing.