Chilton Labs - UK Domestic & International

ChiltonLabs

Subscriber
image-8-1024x598.jpg




Hello, I would like to introduce Chilton Labs to the Meso-Rx community.


My shop can be accessed at the following website:

Code:
www.chiltonlabs.com

Since this post cannot be edited again, I have listed all ordering information, prices, payment methods & shipping details on the above website.
Alternatively, I can be reached on the following email:


Code:
jeri@chiltonlabs.com


I have been producing AAS oils & Tablets for the last 4 years and have a small list of private clients whom I supply to. I now am in a position to scale up my operation.



Production Method (AAS Oils)

Laminar flow hood is switched on and left to run for at least 60 minutes before being used.

Stainless steel surfaces and flow hood are cleaned with 20% bleach solution followed by 70% isopropyl alcohol and left to dry. An overall, nitrile gloves, hair net & facemask is worn.

Raws, BB, MCT oil and BA are mixed on the magnetic stirrer with a small amount of heat depending on the compound. Tren A and E and mixed with minimal heat.

Polycap PTFE filter and media bottle are wrapped & sterilised in the autoclave. First filtration is done via the Borosilicate Glass units and a 0.80µm nylon membrane filter is used.

The filtered solution is then moved into the flow hood and is filtered through a 0.20µm PTFE polycap filter using a peristaltic pump. The pump pushes the oil through the filter and oil directly exits into a sterile media bottle.

After filtration is complete the GL45 port cap is replaced with a standard sterile GL45 cap and the filtered solution is stored in a dark dry space.

Vials and silicone stoppers are washed, rinsed with distilled water and then dried in an oven on low heat. They are then placed in an aluminium foil tray, wrapped with sterilisation wrap, sealed with autoclave tape and go in the autoclave on the wrapped cycle.

The Class B autoclave removes all air from the chamber using a vacuum pump and replaces it with steam.

Vial filling is done in the flow hood using the peristaltic pump. Tubing is wrapped in sterilisation wrap and then sterilised in the autoclave before being used for filling vials. Silicone stopper is placed after each vial is filled.


The flow hood & autoclave is serviced/validated yearly by a third party.




Production Method (Tablets)

Microcrystalline cellulose, di calcium phosphate & magnesium stearate are the excipients used.

The API is triturated with equal parts excipient using a mortar & pestle. More excipient is added each time and this is repeated 4 times. This mixture along with the remaining excipient goes in the V mixer and is mixed for 30 minutes.

Mixture is emptied and loaded into the tablet press. Tablets are dedusted and stored in containers until they are ready to be packed.


Security

Stealth shipping is available by request if needed. Can get as creative as you like and very open to suggestions especially if you have a nosy partner.

Names and delivery addresses will be deleted after order has landed. The email address and list of products purchased will be the only information retained for the purposes of after sales customer service/lab testing credit/bloodwork credit.

VPN and a dedicated Tails device is used for all activity relating to this operation.

I have never sold AAS or any sort of illegal substance in person and never will. Nobody apart from me knows about this operation and I intend to keep it that way.



Identified issues (Dec 2022)



1) Underdosed products

Selling dosage mg/mlTesting dosage mg/ml
NPP​
100​
93.23
Underdosed by 7%​
Test C​
250​
225.64
Underdosed by 10%​
Test E​
300​
278.01
Underdosed by 7.6%​

Whilst the acceptable variation in dosage is 10% in the pharmaceutical industry, I will strive to get as close to the label claim as possible.

I believe to have identified the root of the above and it was me misunderstanding the lab results of the raws. In my calculations I treated the “96%+” lab result as being 100% pure which looking back was a stupid mistake on my end.

To compensate for the above issue, I have priced every product from my store competitively and the 3 underdosed products will be discounted further.

2) Awaiting lab results for Winstrol, Anadrol, Nolva & Cialis tablets. Raws lab report available below.



Lab Testing

I will be lab testing every batch of Raws and also will be lab testing each finished product. The lab reports of my current batch dated 10/2022 can be accessed using the links in my next post or alternatively you can scan the QR code on the product which will direct you to the lab report.

Lab results will also be posted on my website which can be found at the start of this post.

I will be offering £200 store credit for every HPLC lab test of my product done by customers. My only request is that you share the lab test in this thread to redeem the credit. Repeat testing of the same product from the same batch is perfectly acceptable.

Bloodwork will earn the customer £100 store credit.

Each product label has a QR code, when scanned you will be directed to the lab test report for that batch.



Finished Product Lab Reports

NPP:
Janoshik Analytical
Primo E: Janoshik Analytical
Test C: Janoshik Analytical
Tren A: Janoshik Analytical
Tren E: Janoshik Analytical
Test E: Janoshik Analytical
Test P: Janoshik Analytical
Mast P: Janoshik Analytical
Mast E: Janoshik Analytical
Deca: Janoshik Analytical
EQ: Janoshik Analytical

Clomid: Janoshik Analytical
Dianabol: Janoshik Analytical
Anavar: Janoshik Analytical
Turinabol: Janoshik Analytical
Proviron: Janoshik Analytical
Aromasin: Janoshik Analytical



Raws Lab Reports

Tren A:
Janoshik Analytical
Primo E: Janoshik Analytical
Mast P: Janoshik Analytical
NPP: Janoshik Analytical
Mast E: Janoshik Analytical
Tren E: Janoshik Analytical
Test P: Janoshik Analytical
Test C: Janoshik Analytical
Deca: Janoshik Analytical
EQ: Janoshik Analytical
Test E: Janoshik Analytical

Anavar: Janoshik Analytical
Dianabol: Janoshik Analytical
Turinabol: Janoshik Analytical
Winstrol: Janoshik Analytical
Anadrol: Janoshik Analytical
Proviron: Janoshik Analytical
Aromasin: Janoshik Analytical
Nolvadex: Janoshik Analytical
Clomid: Janoshik Analytical
Cialis: Janoshik Analytical


Photos

I hope the below photos satisfies the lab pictures & equipment requirements. I am unable to share pictures of the V blender motor unit and the tablet press as it would easily give away the manufacturer thus eventually tracing back to me.
Lot numbers on filters are hidden as they can be traced back to me. I hope this is understandable.


image-3-1-1024x764.jpg


image-2-1024x718.jpg


image-1-1-1024x579.jpg


image-4-768x1024.jpg


image-5-768x1024.jpg


Filters-1024x867.jpg


image-8-1024x598.jpg


image-9-1024x824.jpg


image-7.jpg


image-6-1024x768.jpg


image-10-785x1024.jpg


image-11-772x1024.jpg
 
Last edited:
Youve quoted £5 for royal mail special delivery, this is £6.70 for anything under 100g in the UK.

Are you happy to be taking a loss on postage?

Seems like this hasn't been thought out well…
 
Youve quoted £5 for royal mail special delivery, this is £6.70 for anything under 100g in the UK.

Are you happy to be taking a loss on postage?

Seems like this hasn't been thought out well…

Hello, Yes that is perfectly acceptable on my end as I already cover the postage fee out of pocket for the free delivery option which is approximately £3.50
 
:p:p:p:p:p:p:p:p:p:p

It's not Friday but those tits look great

Prices look even better.

Maybe add USD conversion on your site for us dumb Americans.

1. What's your reship policy?
2. Payment methods(?)
2b. Post the ass up next
For me its Tits over Price, tho even said they are some nice prices lol
 
image-8-1024x598.jpg




Hello, I would like to introduce Chilton Labs to the Meso-Rx community.


My shop can be accessed at the following website:

Code:
www.chiltonlabs.com

Since this post cannot be edited again, I have listed all ordering information, prices, payment methods & shipping details on the above website.
Alternatively, I can be reached on the following email:


Code:
jeri@chiltonlabs.com


I have been producing AAS oils & Tablets for the last 4 years and have a small list of private clients whom I supply to. I now am in a position to scale up my operation.



Production Method (AAS Oils)

Laminar flow hood is switched on and left to run for at least 60 minutes before being used.

Stainless steel surfaces and flow hood are cleaned with 20% bleach solution followed by 70% isopropyl alcohol and left to dry. An overall, nitrile gloves, hair net & facemask is worn.

Raws, BB, MCT oil and BA are mixed on the magnetic stirrer with a small amount of heat depending on the compound. Tren A and E and mixed with minimal heat.

Polycap PTFE filter and media bottle are wrapped & sterilised in the autoclave. First filtration is done via the Borosilicate Glass units and a 0.80µm nylon membrane filter is used.

The filtered solution is then moved into the flow hood and is filtered through a 0.20µm PTFE polycap filter using a peristaltic pump. The pump pushes the oil through the filter and oil directly exits into a sterile media bottle.

After filtration is complete the GL45 port cap is replaced with a standard sterile GL45 cap and the filtered solution is stored in a dark dry space.

Vials and silicone stoppers are washed, rinsed with distilled water and then dried in an oven on low heat. They are then placed in an aluminium foil tray, wrapped with sterilisation wrap, sealed with autoclave tape and go in the autoclave on the wrapped cycle.

The Class B autoclave removes all air from the chamber using a vacuum pump and replaces it with steam.

Vial filling is done in the flow hood using the peristaltic pump. Tubing is wrapped in sterilisation wrap and then sterilised in the autoclave before being used for filling vials. Silicone stopper is placed after each vial is filled.


The flow hood & autoclave is serviced/validated yearly by a third party.




Production Method (Tablets)

Microcrystalline cellulose, di calcium phosphate & magnesium stearate are the excipients used.

The API is triturated with equal parts excipient using a mortar & pestle. More excipient is added each time and this is repeated 4 times. This mixture along with the remaining excipient goes in the V mixer and is mixed for 30 minutes.

Mixture is emptied and loaded into the tablet press. Tablets are dedusted and stored in containers until they are ready to be packed.


Security

Stealth shipping is available by request if needed. Can get as creative as you like and very open to suggestions especially if you have a nosy partner.

Names and delivery addresses will be deleted after order has landed. The email address and list of products purchased will be the only information retained for the purposes of after sales customer service/lab testing credit/bloodwork credit.

VPN and a dedicated Tails device is used for all activity relating to this operation.

I have never sold AAS or any sort of illegal substance in person and never will. Nobody apart from me knows about this operation and I intend to keep it that way.



Identified issues (Dec 2022)



1) Underdosed products

Selling dosage mg/mlTesting dosage mg/ml
NPP​
100​
93.23
Underdosed by 7%​
Test C​
250​
225.64
Underdosed by 10%​
Test E​
300​
278.01
Underdosed by 7.6%​

Whilst the acceptable variation in dosage is 10% in the pharmaceutical industry, I will strive to get as close to the label claim as possible.

I believe to have identified the root of the above and it was me misunderstanding the lab results of the raws. In my calculations I treated the “96%+” lab result as being 100% pure which looking back was a stupid mistake on my end.

To compensate for the above issue, I have priced every product from my store competitively and the 3 underdosed products will be discounted further.

2) Awaiting lab results for Winstrol, Anadrol, Nolva & Cialis tablets. Raws lab report available below.



Lab Testing

I will be lab testing every batch of Raws and also will be lab testing each finished product. The lab reports of my current batch dated 10/2022 can be accessed using the links in my next post or alternatively you can scan the QR code on the product which will direct you to the lab report.

Lab results will also be posted on my website which can be found at the start of this post.

I will be offering £200 store credit for every HPLC lab test of my product done by customers. My only request is that you share the lab test in this thread to redeem the credit. Repeat testing of the same product from the same batch is perfectly acceptable.

Bloodwork will earn the customer £100 store credit.

Each product label has a QR code, when scanned you will be directed to the lab test report for that batch.



Finished Product Lab Reports

NPP:
Janoshik Analytical
Primo E: Janoshik Analytical
Test C: Janoshik Analytical
Tren A: Janoshik Analytical
Tren E: Janoshik Analytical
Test E: Janoshik Analytical
Test P: Janoshik Analytical
Mast P: Janoshik Analytical
Mast E: Janoshik Analytical
Deca: Janoshik Analytical
EQ: Janoshik Analytical

Clomid: Janoshik Analytical
Dianabol: Janoshik Analytical
Anavar: Janoshik Analytical
Turinabol: Janoshik Analytical
Proviron: Janoshik Analytical
Aromasin: Janoshik Analytical



Raws Lab Reports

Tren A:
Janoshik Analytical
Primo E: Janoshik Analytical
Mast P: Janoshik Analytical
NPP: Janoshik Analytical
Mast E: Janoshik Analytical
Tren E: Janoshik Analytical
Test P: Janoshik Analytical
Test C: Janoshik Analytical
Deca: Janoshik Analytical
EQ: Janoshik Analytical
Test E: Janoshik Analytical

Anavar: Janoshik Analytical
Dianabol: Janoshik Analytical
Turinabol: Janoshik Analytical
Winstrol: Janoshik Analytical
Anadrol: Janoshik Analytical
Proviron: Janoshik Analytical
Aromasin: Janoshik Analytical
Nolvadex: Janoshik Analytical
Clomid: Janoshik Analytical
Cialis: Janoshik Analytical


Photos

I hope the below photos satisfies the lab pictures & equipment requirements. I am unable to share pictures of the V blender motor unit and the tablet press as it would easily give away the manufacturer thus eventually tracing back to me.
Lot numbers on filters are hidden as they can be traced back to me. I hope this is understandable.


image-3-1-1024x764.jpg


image-2-1024x718.jpg


image-1-1-1024x579.jpg


image-4-768x1024.jpg


image-5-768x1024.jpg


Filters-1024x867.jpg


image-8-1024x598.jpg


image-9-1024x824.jpg


image-7.jpg


image-6-1024x768.jpg


image-10-785x1024.jpg


image-11-772x1024.jpg
Someone's done their homework. Those are some awfully competitive prices, you willing to make less per product in hopes of growing large?
 
:p:p:p:p:p:p:p:p:p:p

It's not Friday but those tits look great

Prices look even better.

Maybe add USD conversion on your site for us dumb Americans.

1. What's your reship policy?
2. Payment methods(?)
2b. Post the ass up next

Thankyou for your suggestion
I will add the USD and EUR prices to the website in the next few hours.

Reship policy has been added to the website.

Code:
Free Reships for any seized orders.
Payment: Cryptocurrency & Bank Transfer



Someone's done their homework. Those are some awfully competitive prices, you willing to make less per product in hopes of growing large?
The goal is to grow whilst lab testing every batch & being upfront about any under/overdosing issues so that the customer can adjust their dosage accordingly should they feel it is necessary.
 
Thankyou for your suggestion
I will add the USD and EUR prices to the website in the next few hours.

Reship policy has been added to the website.
Great
The goal is to grow whilst lab testing every batch & being upfront about any under/overdosing issues so that the customer can adjust their dosage accordingly should they feel it is necessary.
I don't think you're going to hear from anyone about overdosing unless it is >10%(Unless we're talking orals obv).

Under dosing however is a big issue that no one here takes lightly. If it were to happen chronically...one would be left to assume that
1. You're either a shit brew
or 2. (Being that raws are dirt cheap)You're profit stingy

Either way, both are problematic- as the past has proven
.
.
.
I believe to have identified the root of the above and it was me misunderstanding the lab results of the raws. In my calculations I treated the “96%+” lab result as being 100% pure which looking back was a stupid mistake on my end.
Can you explain in detail exactly what you mean by this?

Why would you interpret "96%+" as 100% pure?
You said you have been brewing for 4 years, in this time, wouldn't you have encountered and made adjustments for this issue in the past?

Almost all of your oils are under dosed.
How do you plan to remedy this going forward?

Just because we like your girlfriends jugs and there are no (visible) pubes floating around in your vials doesn't mean you'll get an easy pass to BTC town. Our vetting process is long and enervating. Don't get comfortable.
 
Last edited:
@ChiltonLabs You say free reships. Is that as many reships it takes if seized, or Is there a set number...and does this apply to all countries? I hope you realize some like Australia are extremely hard to pass I believe.
 
Whats the reasoning behind a 75mg Tren Ace and a 140mg Primo in MCT?

Are these batches that turned out under dosed so you decided to change the label claim? Seems logical..

Do you provide tracking numbers if shipped by royal mail special?

Cant say i have much hope if you struggle to understand the difference between 96% and 98% and 100% Pure
 
Can you explain in detail exactly what you mean by this?

Why would you interpret "96%+" as 100% pure?
Having looked at various raws testing reports from many vendors I was under the impression that any results which are 96%+ or 98%+ are classed as pure mainly because of the “+”

Furthermore, I believe the margin of error stated by janoshik is 5%
Code:
https://www.janoshik.com/details/

You said you have been brewing for 4 years, in this time, wouldn't you have encountered and made adjustments for this issue in the past?

Almost all of your oils are under dosed.
This is the first time I have sent in samples of finished product for testing. In the past I have only ever tested raws (mainly the more expensive ones) as there was no demand from my customers.

I have created a table to show the difference between label claim and actual dosage.

Compound Label Claim Actual resultPercentage difference
NPP​
100mg/ml​
93.23mg/ml​
7% under​
Primo E​
140mg/ml​
136.95mg/ml​
2.2% under​
Test C​
250mg/ml​
225.64mg/ml​
10.2% under​
Tren A​
75mg/ml​
73.42mg/ml​
2.1% under​
Tren E​
200mg/ml​
202.13mg/ml​
1% over​
Test E​
300mg/ml​
278.01mg/ml​
7.6% under​
Test P​
100mg/ml​
97.10mg/ml​
2.9% under​
Mast P​
100mg/ml​
97.67mg/ml​
2.3% under​
Mast E​
200mg/ml​
195.65mg/ml​
2.1% under​
Deca​
300mg/ml​
280.94mg/ml​
6.5% under​
EQ​
300mg/ml​
283.09mg/ml​
5.8% under​
clomid​
50​
50.21​
0%​
dbol​
20​
19.45​
2.7% under​
anavar​
20​
20.7​
3.4% over​
tbol​
20​
20.15​
0%​
proviron​
50​
51.29​
2.5% over​
aromasin​
12.5​
11.8​
5.7% under​

How do you plan to remedy this going forward?
For my next batch the 96%+ & 98%+ results will be factored in my calculations and this should allow me to hit as close to the label claim as possible.
 
@ChiltonLabs You say free reships. Is that as many reships it takes if seized, or Is there a set number...and does this apply to all countries? I hope you realize some like Australia are extremely hard to pass I believe.
For high risk countries such as Australia I would reship once and then offer a full refund. This would be communicated with the customer at the ordering stage.
 
Whats the reasoning behind a 75mg Tren Ace and a 140mg Primo in MCT?

Are these batches that turned out under dosed so you decided to change the label claim? Seems logical..

Do you provide tracking numbers if shipped by royal mail special?

Cant say i have much hope if you struggle to understand the difference between 96% and 98% and 100% Pure
That is the dosage I have been producing due to crashing issues in the winter and my clients panicking thinking they have got something growing inside the vial.
I will be expanding my product range slowly and will offer more variety in dosages.

Tracking number will be provided.

Cant say i have much hope if you struggle to understand the difference between 96% and 98% and 100% Pure
I am yet to see a 100% pure report from janoshik. If I am not mistaken a few W&M reports had 99% stated for some raws.
I was under the impression that any results which are 96%+ or 98%+ are classed as pure mainly because of the “+”


@mr.redpill my reply to you is currently awaiting moderation approval
 
That is the dosage I have produced due to crashing issues and my clients panicking thinking they have got something growing inside the vial.
I will be expanding my product range slowly and will offer more variety in dosages

Tracking number will be provided.


I am yet to see a 100% pure report from janoshik. If I am not mistaken a few W&M reports had 99% stated for some raws.
I was under the impression that any results which are 96%+ or 98%+ are classed as pure mainly because of the “+”

I’m not being funny but if you have been brewing for all those years you would know a 100mg Tren Ace and 150/200mg Primo are perfectly possible in MCT.

You mentioned that you sent ‘High Cost Raws’ in previously for testing. Do you still have these lab results? (Yes the post that you deleted)
 
I am yet to see a 100% pure report from janoshik. If I am not mistaken a few W&M reports had 99% stated for some raws.
I was under the impression that any results which are 96%+ or 98%+ are classed as pure mainly because of the “+”


@mr.redpill my reply to you is currently awaiting moderation approval
100% falls within the 98%+ category on raw reports, so for 96%+ and 98%+ it's safest to assume they're 96.0% and 98.0% respectively, as a slightly overdosed report looks nicer than a slightly underdosed one. Talk of other testing labs from days gone by reminds me of a couple 100%+ purity reports due to the sample being sent in being of higher quality than the reference it was compared against, good times.
 

Sponsors

Latest posts

Back
Top