Does it look good ?

[randomonline]

Hello, first time home brewing. Wondering if shit looks good before I put it in my body haha. Test E 250mg/ml ~90ML, Tren Ace 200 mg/ml ~95ML. Carrier oil used was olive oil(I know this is not the usual oil used but figured it would only affect things like pip and shelf life so hopefully it's alright).

 

[dennia]

They look like this. They are sealed

 

[Jet Labs]

They look like this. They are sealed

Those are ok to use, but the picture earlier showed loose filters in a bag and that's how non sterile filters are sold.

Refilter all your gear into new vials just to be safe dude!

 

[randomonline]

Thanks everyone for responding, I learned a lot. I've ordered these:

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

www.amazon.nl

and will filter everything into new vials(I've already sterilized and capped the vials so do I need to do it again if it's going to take about 2 weeks for the filters to arrive?). I will risk it with 2 injections with the tren as I said that I was relying on this batch to continue my cycle that I've started with UGL tren, but everything else will be refiltered. Again thanks a lot for the responses, you've helped a ton!

 

[Cashton]

Thanks everyone for responding, I learned a lot. I've ordered these:

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

www.amazon.nl

and will filter everything into new vials(I've already sterilized and capped the vials so do I need to do it again if it's going to take about 2 weeks for the filters to arrive?). I will risk it with 2 injections with the tren as I said that I was relying on this batch to continue my cycle that I've started with UGL tren, but everything else will be refiltered. Again thanks a lot for the responses, you've helped a ton!

Idk which one the tren is, but don’t pin the cloudy one, please. Also switch from olive oil over to something like CSO/GSO or MCT oil.

 

[dennia]

Thanks everyone for responding, I learned a lot. I've ordered these:

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

[CASE OF 25] Spuit Filters [Individueel gesteriliseerd verpakt] Met PVDF Membraan Diameter 33mm poriegrootte 0.22μm door Allpure Biotechnologie (PVDF-33mm-0.22μm) : Amazon.nl: Zakelijk, industrie & wetenschap

www.amazon.nl

and will filter everything into new vials(I've already sterilized and capped the vials so do I need to do it again if it's going to take about 2 weeks for the filters to arrive?). I will risk it with 2 injections with the tren as I said that I was relying on this batch to continue my cycle that I've started with UGL tren, but everything else will be refiltered. Again thanks a lot for the responses, you've helped a ton!

Don't pin unfiltered oil....

 

[aceroids1]

Hey bro, thanks first of all for writing all of this(as well as others who have pitched in). The filters were brought from amazon, they said they are sterile so maybe I should report them so other people don't fuck up as well(these are the filters btw : Amazon.nl ). What about the deca that I posted(last pic, except first bottle which is tren), that one seems clear as I've only used nylon filter for that one, would that be g2g? Will order the .2 whatman syringe filters and refilter everything(except the deca if you say it's good) but I might risk it 1 or 2 injections with the tren until the filters arrive as I was in the middle of a cycle and was counting on this homebrew as UGL ran out(I know, I'm dumb). Actually I still have 2 of the nylon filters that I used for the deca so may just filter a 10mL bottle with those and use that tren until the filters arrive. Ok this has turned into a story, thanks again for the help!

If you didn't use the correct oils such as grapeseed, MCT, or another recommended oil, and chose to use olive oil for whatever reason (not sure how you came up with that idea), then definitely toss it. If you did use the right oils, then I would have just re-heated the oils according to the correct temperatures, and then re-filtered once again to kill any bacteria and remove the larger particles out of the final oil. You could have revived it if you used the correct oils to begin with, but unfortunately, you didn't, so just toss it and take it as a lesson learned.

 

[dennia]

If you didn't use the correct oils such as grapeseed, MCT, or another recommended oil, and chose to use olive oil for whatever reason (not sure how you came up with that idea), then definitely toss it. If you did use the right oils, then I would have just re-heated the oils according to the correct temperatures, and then re-filtered once again to kill any bacteria and remove the larger particles out of the final oil. You could have revived it if you used the correct oils to begin with, but unfortunately, you didn't, so just toss it and take it as a lesson learned.

Using the olive oil is not the greatest choice but can be used and not throwing away as he needs the gear asap. Just to reflitre with sterile filters and is good to go.
Olive oil is used by Galenika in their test and is pharma grade that. Nothing wrong with that but not the best oil to brew. Definitely can be used just filter it

 

[BigBaldBeardGuy]

Hello, first time home brewing. Wondering if shit looks good before I put it in my body haha. Test E 250mg/ml ~90ML, Tren Ace 200 mg/ml ~95ML. Carrier oil used was olive oil(I know this is not the usual oil used but figured it would only affect things like pip and shelf life so hopefully it's alright).

What was your recipe for Tren A brewed at 200 mg/ml in olive oil?

 

[aceroids1]

Using the olive oil is not the greatest choice but can be used and not throwing away as he needs the gear asap. Just to reflitre with sterile filters and is good to go.
Olive oil is used by Galenika in their test and is pharma grade that. Nothing wrong with that but not the best oil to brew. Definitely can be used just filter it

Tren is dirt cheap and he's better off with a fresh batch using the proper oil. He's gonna have pip like a mo foe following your idea. Just toss that shit in the trash and have a little more patience.

 

[dennia]

Tren is dirt cheap and he's better off with a fresh batch using the proper oil. He's gonna have pip like a mo foe following your idea. Just toss that shit in the trash and have a little more patience.

My idea is to do the things right. I give the best possibility for his situation. And is nothing improper using olive oil just not the best choice. Not that will give pip and I gave you the example of test e from Galenika.
He has some options what he will do depends on him. He is a big boy and can decide what suits for him

 

[randomonline]

Tren is dirt cheap and he's better off with a fresh batch using the proper oil. He's gonna have pip like a mo foe following your idea. Just toss that shit in the trash and have a little more patience.

I filtered and used it, indeed pip is fucking insane if I even just touch the spot it burns like a mother fucker. But the tren works for sure

 

[randomonline]

What was your recipe for Tren A brewed at 200 mg/ml in olive oil?

20 gram tren ace
2ml BA
25ml BB
58ml oil

 

[dennia]

I filtered and used it, indeed pip is fucking insane if I even just touch the spot it burns like a mother fucker. But the tren works for sure

At 200 mg/ml is normal to be like that but if you choose to do that then have fun

 

[randomonline]

At 200 mg/ml is normal to be like that but if you choose to do that then have fun

Oh so it's not from the choice of oil? Anyway, I'd rather have pip from higher concentration than the lumps I get from a lot of volume...

 

[dennia]

Oh so it's not from the choice of oil? Anyway, I'd rather have pip from higher concentration than the lumps I get from a lot of volume...

It's more than one factor that give you the pip
At 200 mg try EO if you want but max I will go with 150

 

[Oroku_Saki]

Oh so it's not from the choice of oil? Anyway, I'd rather have pip from higher concentration than the lumps I get from a lot of volume...

For me the opposite is the case, high concentrations cause problems, high volume does not.

I don't know if it has been written before, but please discard the solution you used to melt the filter. You can filter out the particles, but you cannot filter out what may have been transferred into the solution. It's not worth the risk, in my opinion.