Dutch Labs - EU Domestic

[Eddie.]

yes I feel the dutch pills differently (and I have tried dozens of brands, and I doubt that the others are empty or underdosed, as if they arrive in the stomach they are destroyed, while these are absorbed and work)

the chemistry is very strange and fascinating, like some subjects who do not respond with testosterone cypionate and explode using enanthate; already seen several times

Nice! I’ve had a bad experience with another brand’s tadalafil which tested fine but it did absolutely nothing on me. Even 20mg, no effect or side effect. There’s definitely something going on with the binders or additives that affect absorption, perhaps not to everyone but apparently I’m one of them.

 

[victoroid]

Para cuando disponibilidad de MAST E?

 

[Hamd19]

Hello @Dutch Labs
Do u guys know when you're gonna a restock on Masteron P ?
And regarding the payment methods, when will the bank wire be available?
Thanks !

 

[RedMatterGG]

Here to give some additional feedback on the products and their quality,purely subjective,i dont have any tests to prove anything,the drive and the strength on low dosage on dutch labs stuff is spot on,best ive ever felt,ive only the bing chiling stuff up until now and another source that was good allegedly but got busted a while ago.

 

[RedMatterGG]

yes I feel the dutch pills differently (and I have tried dozens of brands, and I doubt that the others are empty or underdosed, as if they arrive in the stomach they are destroyed, while these are absorbed and work)

the chemistry is very strange and fascinating, like some subjects who do not respond with testosterone cypionate and explode using enanthate; already seen several times

+1,the best ive ever tried. Keep the good stuff coming lad

 

[Dutch Labs]

Para cuando disponibilidad de MAST E?

No estimate for Mast E.

Hello @Dutch Labs
Do u guys know when you're gonna a restock on Masteron P ?
And regarding the payment methods, when will the bank wire be available?
Thanks !

Mast P might be back soon. (next month)

Bank, will be back at a later moment, but no estimate.

 

[Hamd19]

No estimate for Mast E.


Mast P might be back soon. (next month)

Bank, will be back at a later moment, but no estimate.

OK, thanks!!

 

[Kralteramon]

Ordered test and tren from these guys and the delivery was lightning fast, super professional packaging and just overal a great experience. Would recommend.

 

[mexx]

Hi @Dutch Labs,

I have a question. You say, that all your injectables are dissolved in MCT Oil, right?
According to my information, Dihydroboldenone has a melting point at 192-196 °C. The smoke point of MCT Oil is just 160°C.
In my opinion, If the MCT Oil is heated up to the melting point of DHB, it's probably already spoiled.
What's your opinion on that?

Do you use any other synthetic solvents in your formulation?

 

[Sampei]

Hi @Dutch Labs,

I have a question. You say, that all your injectables are dissolved in MCT Oil, right?
According to my information, Dihydroboldenone has a melting point at 192-196 °C. The smoke point of MCT Oil is just 160°C.
In my opinion, If the MCT Oil is heated up to the melting point of DHB, it's probably already spoiled.
What's your opinion on that?

Do you use any other synthetic solvents in your formulation?

You have no clue about brewing don't you?

 

[Ghoul]

Hi @Dutch Labs,

I have a question. You say, that all your injectables are dissolved in MCT Oil, right?
According to my information, Dihydroboldenone has a melting point at 192-196 °C. The smoke point of MCT Oil is just 160°C.
In my opinion, If the MCT Oil is heated up to the melting point of DHB, it's probably already spoiled.
What's your opinion on that?

Do you use any other synthetic solvents in your formulation?

The melting point of sugar is 185°c.

Think about this.

 

[mexx]

You have no clue about brewing don't you?

Yes, I have no clue, and? That's the reason I ask. So, feel free and explain it to me, I am happy if I can learn something new.

 

[rockyraccoon]

Yes, I have no clue, and? That's the reason I ask. So, feel free and explain it to me, I am happy if I can learn something new.

Read the comment amount sugar's melting point and ask yourself if you use a nuclear reactor to brew your morning coffee...

 

[Dutch Labs]

Hi @Dutch Labs,

I have a question. You say, that all your injectables are dissolved in MCT Oil, right?
According to my information, Dihydroboldenone has a melting point at 192-196 °C. The smoke point of MCT Oil is just 160°C.
In my opinion, If the MCT Oil is heated up to the melting point of DHB, it's probably already spoiled.
What's your opinion on that?

Do you use any other synthetic solvents in your formulation?

Thanks for your question. We only use benzyl benzoate as a solvent.

That melting point is not the same as solubility. These melting point temperatures only apply to the dry crystalline form, but when the powder is added to, in this case, MCT oil with a solvent, it dissolves at much lower temperatures.

If you would put the dry powder on e.g. an oven plate, it should melt at the melting point temp.

There is no need to go above 55 - 60C when stirring for any compound. MCT oil is thin, so the compound requires less solvents to dissolve and stay in solution, as with a more thick/viscous oil, like e.g. castor.

 

[mexx]

Thanks for your question. We only use benzyl benzoate as a solvent.

That melting point is not the same as solubility. These melting point temperatures only apply to the dry crystalline form, but when the powder is added to, in this case, MCT oil with a solvent, it dissolves at much lower temperatures.

If you would put the dry powder on e.g. an oven plate, it should melt at the melting point temp.

There is no need to go above 55 - 60C when stirring for any compound. MCT oil is thin, so the compound requires less solvents to dissolve and stay in solution, as with a more thick/viscous oil, like e.g. castor.

Thank you!

 

[Dutch Labs]

TEST E 400 is available again

https://dutchlabs.eu/product/testosterone-enanthate-400/

The test result came out lower than expected. I think I pushed one of the filters to the max on this batch and a few percent of the api particles got left behind.

Although my theory of non homogenous raws is still a possible cause too, and is certainly more likely with test e than with primo.

In any case, I will use a large filter for these batches in the future.

Don't hesitate to purchase, all our injectable steroid vials always contain 10.3 - 10.5ml so won't ever get too little even if it's under-dosed slightly.

---

- Solana (USDC, USDT) is available as payment option at checkout @Thebest82

- Test Base raws will be send to Janoshik soon.

- The prices have gone up a few euros on most injectable products. They will go down again when the raws situation gets better. Our pricing is still very competitive and 10 and 5 packs always get you a good deal.

- PCT/AI products are expected this month.

- Peptides are coming very soon. They will be sent to Janoshik first which will add some waiting time.

- FAQ, and crypto guides will be added this coming week.

 

[Enjoythements]

Take your time preparing the products, Chef. There’s no need to rush and risk low quality or underdosed compounds. I bet many of us rather wait for high quality oils.

Do you have any plans for introducing more exotic compounds like injectable Dianabol, Winstrol, Anadrol, and other orals once the raw materials situation is resolved?

Also, any updates on the raws situation? Have you heard any recent rumors or insights about the status of raws?

 

[Dutch Labs]

Take your time preparing the products, Chef. There’s no need to rush and risk low quality or underdosed compounds. I bet many of us rather wait for high quality oils.

..

Also, any updates on the raws situation? Have you heard any recent rumors or insights about the status of raws?

Thanks.

One of the problems with the raws situation for us is that it slows down the workflow on multiple levels. Mainly making smaller batches isn't efficient, as it takes more time cleaning the tubing, sterilising everything more frequently etc. And if a compound is available at all, it's still a balancing act of buying the right quanity to justify the cost and risks.

Since we were a new lab, we did not have the funds ready to do large-scale sourcing at the time. When we get through this, we will definitely feel like we can fly.

To answer your question, I have no indications that anything has changed at this time.

Do you have any plans for introducing more exotic compounds like injectable Dianabol, Winstrol, Anadrol, and other orals once the raw materials situation is resolved?

Yes. The plan is to add a wide range of injectable products. Winstrol is on the list, will consider other injectable orals as well.

 

[Dutch Labs]

START OF SUMMER PROMO

Let's start June off right!

Coupon:

SUMMERSTART

Apply the coupon on the cart page for 10% off all products:

https://dutchlabs.eu

Promo will run for a full week — through June 7th.

 

[Coogie]

Payment by sepa in the nsr future. Need a restock and would like to ty you guys