Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Man, you have set a new high mark !![]()
BBC3 Can you write a thread on Sex hormone binding globulin. Your whole theory I would really like to know your thoughts?
Some Problems I am having with the construction of the CES device via the estim technology I have discerned are these. Primarily voltage/current regulation and achieving low enough frequency response/generation. As you know that Estim devices REVERSE modulate sound currents generated for speaker output via Audio Output Transformers (AOT's). The best ones I have found for the purpose state to be true down to no lower than 150hz. While this does not completely preclude a good experiment, as some of the therapies DO include frequencies up to 5000hz, it may limit precise duplication. Also I am not sure about the current calculations. I note that these CES devices appear to be driven by "Up to 35 volts" with a sum 1-4 milliamps tops. The device I am using runs off about 6 volts as a driving source - so I will have to break out my SLIDE RULE.... So as not to wind up flopping around on the floor like a fish.. LOL
Notably, much of human electrical application experimented today happens to hover aboud the 60hz mark (+/-). If you note, even electrical AC signal as carried in residential power lines modulates at about 60hz. I have also determined that the specs of your average ECT inducing device are 250volts applied at light amperage (dont recall exactly), but as a SQUARE or continuous sine wave in increments of 1-4 seconds.. But it does happen that the signal strength of the CES device is strong enough that when applied to the skull it has the capability of rendering a jackass grin upon recipients face "safely"..
I have more to add about the whole notion of applying exogenous electrical signal to the body, and as a "steroid" even. It does not take a rocket scientist to figure out that enough time on an estim machine will render one sitting around with A WHOLE LOT OF ENERGY to burn and for a while. Even leaving one feeling a bit uncomfortable as it they might just start breakdancing if not for a good beer and a solid GROUND POINT to discharge... LOL:drooling:
It can NOT be discounted that a significant purpose of earth metals in the BODY (and MAY be the sole purpose) is to (1) Turn it into a battery (iron/nickel), & (2) give it the metals which have the potential to create electricity simply by the proximity (copper/zinc) of their interaction alone. And all with the effort make us essentially a CYBORG. Its funny how the writers of the Terminator series talk about how they meshed man and machine, when essentially that is what we are.
*** It should also be noted that the constructs of animals may infact be the holy grail of energy usage in that they can actually create more electricity than they can use AND Store, and at an instant.
The freq response of a xfmr doesn't suddenly go to zero at a given low freq. The secondary voltage drops off gradually as the input freq decreases. You could build a filter to compensate so that the output is level despite the input freq. Here are the design equations:
RL circuit - Wikipedia, the free encyclopedia
OR you could simply turn up the AMPLITUDE of the input signal or the bass if your amp is so equipped. Pre - digital amps had a loudness filter selector which increased the low and high freq response to compensate for the amps falloff at low and high freqs at low volume.
Hope this makes sense.
If you want sound studio or medical grade freq response you will need a two channel o-scope so as to compare and level the input and output. You might get away with a 31 band equalizer bur you will have input/output level matching problems to solve.
If you don't already have enough to think about- how about remote control via the true stereo A2DP Bluetooth protocol ?
Good to see you back BBC3 I've missed your intriguing posts sir...I've touched on this before. And I've found I have been ripped off AGAIN... Anyways...
http://www.earthinginstitute.net/?page_id=24
Lately I have been coming back to some old notions. I DO think the authors above to an interestingly well job at describin what they are intending.
So it starts like this. I am planting that ground rod finally.
But there's more. I am also planning some experiments with the wife in bed.. (and beyond making her exclaim "Ohhhh, Daddy.... Daddy..... Fuk that ass so good...!) LOL
First I was thinking I was gonna attach electrical wire and electrodes to our heads and see if we could dream together.
Then I start thinking, well, where does the ground go and where does the "positive" go..?!?
So then I start thinking...:
1. Is there a DIRECTION of flow. And +/- related...?
2. What kind of CABLE to use..? The tighter the spindle, the higher the frequency capacity...
3. It should also be noted that high freq WILL NOT carry on low coil cable.
4. Head to head, or other to WHAT?
5. They say RECEPTION is at the PINEAL in the head. BUT TRANSMISSION is from the TORSO.. Is this what the VAGUS NERVE is for..?!!Cause God only knows OTHERWISE>..
6. The placement of said trodes, sizing, and necessary application....?
7. Tinfoil..? Really..?
8. PROXIMITY is always the KEY. Shit, if folks can be telepathic from a DISTANCE.. Laying side by side, or even touching should be a no-brainer...
But my initial premise of grounding to earth for a nightly discharge to sleep soundly is a promising one I suspect. The question is HOW TO WAKE UP. And will that difficulty CHANGE..
MORE IMPORTANTLY, how to use electrical current to energize in the morning. AND AS AN ALARM CLOCK SO TO SPEAK. With no sound... To HEAR. (but you will feel it..!)
I can testify to this. I have created so much electrical stimulation in my body E-stimming in the past that I was absolutely sure I was about to Seize...! While I never actually documented the activity, I DO RECALL that it was always the low freq around 50-250hz. Low amplitude and amperage of course. Waveform totally unrecalled...
But never fret/// I Will find it...
So I am proposing essentially what I already know... Earth ground to sleep, BUT NOW SUPP ELECTRICITY TO WAKE.... (and when I say ""Ground" - DO NOT USE THE THIRD PRONG ON YOUR OUTLET. Make a SEPARATE ground pole to earth..!!!)
*** I am not so sure that we could not replace amphetamines, cocaine, or any other stimulant with electricity. And visa-versa, sedatives with ground... I actually wonder now just what kind of a BUZZ I can CREATE with electricity..! Dopamine, serotonin, etc...
FINALLY, whats funny is that I spoke once with this guy that is big into "binaural beats", which is the application of SOUND frequency to brain via ears and frequency TRANSITION thru brain,hearing (but I dont think so)... He stated"there is no closer path to the brain".. I quickly tried to explain to him the concept of frequency modulation and reversal of sound back to electrical waveform and he ignorantly dismissed. Or led me to believe that. No, I never bought it from him...![]()
*puts on tin foil hat*
I'm listening.


