MESO-Rx

Anabolic Steroids

Gerion Pharm (domestic)

ebkallday said:
Wow. And the test suspension 100 is $80???? I can get it for $25 a vial. Most can get it for $30.
Click to expand...
it is a relatively new product and my raw price was high as I did not buy very much in order to try it out...it is definitely priced high but I am still selling it, slowly lol.
 
nophat said:
Your short esters might be good
But it seems your asking top$for long esters. Is this so you have time to collect $$ before it kicks in? To find out it's not the real thing. Shit I have prim for 80$ the same as your Tren E. With a pass on labmax.
Click to expand...
no, haha, not the reason. But I get what your saying, the reason is usually the short esters like mast and tren are 100 and longs are 200.
 
Pak arrived today oils are clear with nothing floating around caps look like they are filled very close to being same as the rest only thing i seen is the tes p vial is very slighlty undefilled compared to the tes e maybe the e is overfilled ? . i have not verified or tried any of it yet so until i can stop by a buddies an have him labmax it i cant say if its good or not again i am not saying to order from him or vouching in anyway use your descretion about spending your money with any source
 

Attachments

  • 20150820_144500.jpg
    20150820_144500.jpg
    33.5 KB · Views: 80
XNooBX said:
As with your first thread that obviously wasn't successful enough that you had to make a second thread. People have asked you for pics of your setup and other questions as well you still have not addressed any of those questions. Why should anyone here trust a goddamn thing you have to say? Prove us wrong brah! Prove that your shit is no different than any other bathtub setup! Do you have an autoclave? What do you do to ensure the sterility of your products? What makes you any different than any other fly-by-night lab? Who the fuck are you? How long have you been brewing? These are fucking absolute real sincere questions that need to be answered. Your pushing shit that people are putting into there bodies, do you not feel that they need more than "My customers say it's good, so it must be good" fucking answers here? If thats the case maybe reddit or eroids would be best for you!
Click to expand...
---fair enough, obviously I am a small operation, I do not have a professional lab but I am very careful. I have been brewing for almost two years, started just for myself and then expanded into brewing for friends, then a few local competitors. Everything I use is disposable except my beaker. I replace everything every time I brew. I have a condo with a enclosed kitchen. I turn off central air, close door, clean every surface thouroughly. I do not have an autoclave, they are very expensive for an operation like mine. Steralize all vial with 99% alcohol and an oven, I am ugl and like most I don't have an autoclave although I know some do. I have brewed thousands of vials without any contamination issues. I consistently change gloves to avoid any cross contamination. I where protective gear, face mask, gloves, hair net, and a disposable clean suit. The suit is not lab grade but it helps avoid contamination. Never had anyone get infections. I am very careful about capping, capping each vial as I fill it to avoid exposure to air and contaminants.
 
XNooBX said:
As with your first thread that obviously wasn't successful enough that you had to make a second thread. People have asked you for pics of your setup and other questions as well you still have not addressed any of those questions. Why should anyone here trust a goddamn thing you have to say? Prove us wrong brah! Prove that your shit is no different than any other bathtub setup! Do you have an autoclave? What do you do to ensure the sterility of your products? What makes you any different than any other fly-by-night lab? Who the fuck are you? How long have you been brewing? These are fucking absolute real sincere questions that need to be answered. Your pushing shit that people are putting into there bodies, do you not feel that they need more than "My customers say it's good, so it must be good" fucking answers here? If thats the case maybe reddit or eroids would be best for you!
Click to expand...
And I started the second thread to make changes as I cant edit a list or procedures on this forum that's why I made sure people knew there was another thread if they want to check it out..
 
retpsd said:
Two threads, two donations....you freeloading fuck.
Click to expand...
haha ok ok man how bout you PM me and explain how you want to collect my money and how youll even know when and if I make a donation, I looked at the site I see nowhere where I can make an anonymous donation with a private bitcoin address no one has used and if I do, how do you know it was me, makes me question the anonymity of the situation... More than willing to donate just want to know how you expect to keep it anonymous while still verifying I donated?
 
GerionPharm said:
haha ok ok man how bout you PM me and explain how you want to collect my money and how youll even know when and if I make a donation, I looked at the site I see nowhere where I can make an anonymous donation with a private bitcoin address no one has used and if I do, how do you know it was me, makes me question the anonymity of the situation... More than willing to donate just want to know how you expect to keep it anonymous while still verifying I donated?
Click to expand...

Maybe PM Big Pimpin' Millard Himself?

I'm sure he will be able to figure out a way for truly anonymous donation..
 
GerionPharm said:
---fair enough, obviously I am a small operation, I do not have a professional lab but I am very careful. I have been brewing for almost two years, started just for myself and then expanded into brewing for friends, then a few local competitors. Everything I use is disposable except my beaker. I replace everything every time I brew. I have a condo with a enclosed kitchen. I turn off central air, close door, clean every surface thouroughly. I do not have an autoclave, they are very expensive for an operation like mine. Steralize all vial with 99% alcohol and an oven, I am ugl and like most I don't have an autoclave although I know some do. I have brewed thousands of vials without any contamination issues. I consistently change gloves to avoid any cross contamination. I where protective gear, face mask, gloves, hair net, and a disposable clean suit. The suit is not lab grade but it helps avoid contamination. Never had anyone get infections. I am very careful about capping, capping each vial as I fill it to avoid exposure to air and contaminants.
Click to expand...

Just thought you should know, 70% alcohol is recommended for cleaning over 99% because 70% is more effective at killing pathogens.

http://www.cdc.gov/hicpac/Disinfection_Sterilization/6_0disinfection.html

http://www.nzhealthe.co.nz/knowledge/alcohol-as-disinfectants

Edit: not the primary reason I am not considering gerion, but sure adds to the list
 
Last edited:
halodos said:
Just thought you should know, 70% alcohol is recommended for cleaning over 99% because 70% is more effective at killing pathogens.

http://www.cdc.gov/hicpac/Disinfection_Sterilization/6_0disinfection.html

http://www.nzhealthe.co.nz/knowledge/alcohol-as-disinfectants

Edit: not the primary reason I am not considering gerion, but sure adds to the list
Click to expand...
yes more effective at killing some pathogens but not all, the length of exposure to disinfectant is more important than the 70% vs 99%.. The main reason 70% is more effective is because it has a longer evaporation rate. If the 99% is replenished and replaced it can be used with the same effectiveness as 70% possibly better although i have not found any concrete comparrisions..."Length of exposure is a key factor in determining the effectiveness of a disinfectant" per cdc... so yeah if thorough and on top of your process 99% can be used as effective as 70% plus it kills the few things 70% can't. If exposed long enough everything 70% kills can be killed by 99% plus more...
 
GerionPharm said:
yes more effective at killing some pathogens but not all, the length of exposure to disinfectant is more important than the 70% vs 99%.. The main reason 70% is more effective is because it has a longer evaporation rate.
Click to expand...

You better read it again.

"The most feasible explanation for the antimicrobial action of alcohol is denaturation of proteins. This mechanism is supported by the observation that absolute ethyl alcohol, a dehydrating agent, is less bactericidal than mixtures of alcohol and water because proteins are denatured more quickly in the presence of water."

http://www.cdc.gov/hicpac/Disinfection_Sterilization/6_0disinfection.html​
 
tacevedo said:
@ButtcrackBilly you might want to pull your pants up bro, I'm sure @MEEKmlz still around here somewhere lurking for free gear and butt holes.
Click to expand...

Fine, good point.... But you looked at my Buttcrack bitch.... Just kidding I'm a rookie here , much respect! Your avatar is false advertising so I figured I would troll everyone .... Haha you were my inspiration Taco-Vedo , i will follow you straight to juice-HELL for bulk gains and mass specs of UGL kitchen-sewerage
 
You must log in or register to reply here.

Similar threads

G
Update GYC Test Report
Replies
5
Views
113
G-Lisa
G
A
WWB & BBA Testing Groups - Oils, Orals, Peps
5 6 7
Replies
139
Views
11K
Andrewthatguy
A
H
New Member Introduction
Replies
2
Views
49
williamboejer
W
M
Intro post/about me
Replies
0
Views
22
MoreShakesMoreCakes
M
OEP LABS
OEP LABS Domestic
283 284 285
Replies
6K
Views
274K
Choochoo
C

Sponsors

Latest posts

Back
Top