Injectable Glutathione Recipe

[atruse]

Honestly, i've been using 20mg PQQ daily for years now and never missed any of that. I love me my Mito supps and couldn't imagine a single day without it.

No experience with injectable PQQ but on that note, injectable Q10 seems to be a really nice energy driver

what would you dose q10 at injectable?

I’ve been taking these two for years oral, adding them to injections sounds nice…

 

[IndividualMan]

Are the claims true that glutathione is ineffective whether taken orally or by injection because it doesn't enter the cells?

look at @Photon threads about inj glutathione + Halo cycles and his newest postings in that thread about doing Injectable Sdrol @ 150mg/day, then form your own opinion on the matter.

 

[Thraci4n]

look at @Photon threads about inj glutathione + Halo cycles and his newest postings in that thread about doing Injectable Sdrol @ 150mg/day, then form your own opinion on the matter.

Thank you so much.

 

[PenguinPiss]

PQQ i buy capsules from Life Extension and i pull the PQQ out of it.
Nobody trustworthy seems to have PQQ raws -- it's on ebay, etsy, whatever but who knows whats inside..
I can get raws from China but i'd need to buy bulk and get it tested, which just isn't worth the time.

Not sure if you've seen this, but maybe it'll help if not:

Coenzyme PQQ Pyrroloquinoline Quinone Powder 99% HPLC

Enhance cellular health with Pyrroloquinoline Quinone (PQQ) Powder. Known for its antioxidant properties, it supports energy production and wellness.

www.bulknaturalswholesale.com

 

[Photon]

Not sure if you've seen this, but maybe it'll help if not:

Coenzyme PQQ Pyrroloquinoline Quinone Powder 99% HPLC

Enhance cellular health with Pyrroloquinoline Quinone (PQQ) Powder. Known for its antioxidant properties, it supports energy production and wellness.

www.bulknaturalswholesale.com

Yes I've seen it and am considering it.
They have COA for every product too..
But that website looks...idk dubious lol

 

[Nidus]

what would you dose q10 at injectable?

I’ve been taking these two for years oral, adding them to injections sounds nice…

Normally injectable versions start at 25-50mg, esp. at higher concentrations it get quite thick the oil itself from what i've seen

 

[Photon]

Normally injectable versions start at 25-50mg, esp. at higher concentrations it get quite thick the oil itself from what i've seen

In the US we have an amino website that apparently sells it at 300mg/ml, I think it tested at 320 lol. It's like 100$ a vial..check out this thread

J

Thread 'Injectable coq-10'

Nov 23, 2025

Received some injectable coq-10 from MA yesterday.

Gently thawed it with a blow-dryer about 6" away and this morning it seems to have solidified again. Room temp is about 75 degrees.

Is this typical?

Also one of the sloppiest crimp jobs I've ever seen.

• jan912

 

[Nidus]

In the US we have an amino website that apparently sells it at 300mg/ml, I think it tested at 320 lol. It's like 100$ a vial..check out this thread

J

Thread 'Injectable coq-10'

Nov 23, 2025

Received some injectable coq-10 from MA yesterday.

Gently thawed it with a blow-dryer about 6" away and this morning it seems to have solidified again. Room temp is about 75 degrees.

Is this typical?

Also one of the sloppiest crimp jobs I've ever seen.

• jan912

Ohh, only seen some thick versions here in EU that looked liked honey at 50-100mg

 

[Duke309]

I'd love to know too.
I get my COQ10 from PureBulk.

PQQ i buy capsules from Life Extension and i pull the PQQ out of it.
Nobody trustworthy seems to have PQQ raws -- it's on ebay, etsy, whatever but who knows whats inside..
I can get raws from China but i'd need to buy bulk and get it tested, which just isn't worth the time.



Your glut turns into crystals?

one of the two (glutathione or carnitine) crashed into white crystal like floaters and white on the bottom of the vial and wouldn't go back into solution with heat and shaking. I'm betting it just got too cold in my fridge. I never had issues with my 300mg/ml glutathione by itself.

 

[BigManBlastoise]

I made 80ml 2 weeks ago:

-Added 40ml sterile water to a 100ml beaker
-Scooped in 8g bulk redeuced glutathione
-let the magnetic mixer do the work disolving it fully
-add 40g of l-carninitne 5g at a time
-let the magnetic mixer do the work disolving it fully
-added 72 units of BA
-start filtering through PES 33mm 22um filter into 20ml vials
-put vial spike in 1 vial
-put in fridge
-Pin 1-2ml ED subq in the morning or IM pre-workout in VG (quads don't like it)

Bulk supplements l-carnitine
Bulk supplements reduced glutathione

I'd like to try this recipe, I like that you avoided using the sodium hydroxide, I just loaded up my cart and using bulk supplements L-car it's basically the same cost as the sodium hydroxide, not a massive savings but it's looking like it will probably work out to a similar cost to what I planned to spend on glutathione alone including brewing supplies, so that's pretty cool.

My question is about the swfi, this is looking like the big hidden cost, I saw another meso user ask if they could use this: Water IV Injection 500ml Non DEHP , but they asked in a source thread and went unanswered, I was hoping someone here might be able to provide some insight if it's the right water and if so what the best homebrew method would be to transfer this water from the iv bag into some sterile vials for storage, or if that's an acceptable plan. (Sorry for the low pixel count on the screenshot)


Alternatively I'd appreciate help sourcing swfi at a reasonable price. It just doesn't seem like it should cost more than hosperia bac, but maybe I'm just being a cheap ass.

Bonus question if my first two weren't offensively ignorant, are ks tec vials acceptable? I've seen people recommended them but I've also seen folks recommended "ultra spec" which I admittedly haven't researched yet so ignore this if I should just do my own research and I'll definitely get to it.

 

[TallandSmall]

I'd like to try this recipe, I like that you avoided using the sodium hydroxide, I just loaded up my cart and using bulk supplements L-car it's basically the same cost as the sodium hydroxide, not a massive savings but it's looking like it will probably work out to a similar cost to what I planned to spend on glutathione alone including brewing supplies, so that's pretty cool.

My question is about the swfi, this is looking like the big hidden cost, I saw another meso user ask if they could use this: Water IV Injection 500ml Non DEHP , but they asked in a source thread and went unanswered, I was hoping someone here might be able to provide some insight if it's the right water and if so what the best homebrew method would be to transfer this water from the iv bag into some sterile vials for storage, or if that's an acceptable plan. (Sorry for the low pixel count on the screenshot)
View attachment 376170

Alternatively I'd appreciate help sourcing swfi at a reasonable price. It just doesn't seem like it should cost more than hosperia bac, but maybe I'm just being a cheap ass.

Bonus question if my first two weren't offensively ignorant, are ks tec vials acceptable? I've seen people recommended them but I've also seen folks recommended "ultra spec" which I admittedly haven't researched yet so ignore this if I should just do my own research and I'll definitely get to it.

I threw out a bunch of ks tec vials. They are “sterilized” but you could clearly see a bunch of dust and stuff on the inside. Sterile, but not clean.

 

[Photon]

I'd like to try this recipe, I like that you avoided using the sodium hydroxide, I just loaded up my cart and using bulk supplements L-car it's basically the same cost as the sodium hydroxide, not a massive savings but it's looking like it will probably work out to a similar cost to what I planned to spend on glutathione alone including brewing supplies, so that's pretty cool.

My question is about the swfi, this is looking like the big hidden cost, I saw another meso user ask if they could use this: Water IV Injection 500ml Non DEHP , but they asked in a source thread and went unanswered, I was hoping someone here might be able to provide some insight if it's the right water and if so what the best homebrew method would be to transfer this water from the iv bag into some sterile vials for storage, or if that's an acceptable plan. (Sorry for the low pixel count on the screenshot)

Alternatively I'd appreciate help sourcing swfi at a reasonable price. It just doesn't seem like it should cost more than hosperia bac, but maybe I'm just being a cheap ass.

Bonus question if my first two weren't offensively ignorant, are ks tec vials acceptable? I've seen people recommended them but I've also seen folks recommended "ultra spec" which I admittedly haven't researched yet so ignore this if I should just do my own research and I'll definitely get to it.

yes that works

cut it, pour into beaker
add 9% ba, ~4.6ml for 500ml
filter using .22um sterile PES syringe filters, 10ml syringe

beaker, benzoyl alcohol, ultraspec vials -- medlabsupply
pes syringe filter -- kstek/cobbetter

 

[BigManBlastoise]

I threw out a bunch of ks tec vials. They are “sterilized” but you could clearly see a bunch of dust and stuff on the inside. Sterile, but not clean.

Understood, disappointing but not super surprised.

yes that works

cut it, pour into beaker
add 9% ba, ~4.6ml for 500ml
filter using .22um sterile PES syringe filters, 10ml syringe

beaker, benzoyl alcohol, ultraspec vials -- medlabsupply
pes syringe filter -- kstek/cobbetter

Thank you very much! I appreciate the recommendation for where to get ultraspec vials!

I also appreciate the sanity check on the sterile water for injection handling process, I knew I was overthinking it.

 

[Photon]

add 9% ba, ~4.6ml for 500ml

i meant 0.9% which is ~4.6ml
please don't use 9%