Is this Moisture?

[Qualityoflife86]

I brewed

Boldenone Cypionate​

210mg/ml
2BA/25BB because it crashed at 20BB
GSO
heated at 80C for an hour both times.
now this comes out not looking like the crash from yesterday but cloudy.

has already been filtered buy a .45 bottle top and then twice through a .2 bottle top filter. all brand new.

any ideas?

 

[Jet Labs]

Any of the filter materials made from PES?

 

[Diempes]

Sometimes cloudiness its because it hasnt dissolved/melted.
U dont need 1hr at 80 degrees...
Melting point is between 93-104 degrees...
Did it get cloudy when it cooled down? Or during the process, sometines it can be resolved by using a little of a stronger solvent.

 

[Qualityoflife86]

Ok so I'm stupid and I think I have an answer.

I put it through the bottle top filter waayyy to fucking hot and destroyed the filter. like 80ish degrees C.

This time i let it cool down until I could hold the glass in my hand.
I used a new Bottle top filter and it fixed it all up. I'm putting it through the new filter a second time for good measure.

 

[Jet Labs]

Ok so I'm stupid and I think I have an answer.

I put it through the bottle top filter waayyy to fucking hot and destroyed the filter. like 80ish degrees C.

This time i let it cool down until I could hold the glass in my hand.
I used a new Bottle top filter and it fixed it all up. I'm putting it through the new filter a second time for good measure.

Why kind of filter are you using?

 

[Qualityoflife86]

OMFG yes its PES.

How could I have made that mistake ffs.

ill have to confirm but im almost positive its PES... FML

 

[Qualityoflife86]

Why kind of filter are you using?

YEP PES!!!!

FFS let me check if i have any other PVDF ones

 

[Qualityoflife86]

Why kind of filter are you using?

YEP all my fuckin bottle top filters are PES...

guess what, I have loads of PVDF syringe filters....
ill just go fuck myself now...

 

[Qualityoflife86]

I think it's still gonna crash, I saw a tiny swirl in it.

 

[Evom1]

80* c is like 176* f isn't it?

 

[Qualityoflife86]

80* c is like 176* f isn't it?

yes.

 

[Qualityoflife86]

Sometimes cloudiness its because it hasnt dissolved/melted.
U dont need 1hr at 80 degrees...
Melting point is between 93-104 degrees...
Did it get cloudy when it cooled down? Or during the process, sometines it can be resolved by using a little of a stronger solvent.

It gets cloudy when it cools down to room temp.

still a bit cloudy even after all that.

I dont understand how it's not holding with all that bb

 

[Jet Labs]

It gets cloudy when it cools down to room temp.

still a bit cloudy even after all that.

I dont understand how it's not holding with all that bb

Sounds like it's dissolved pes and not moisture.

Hot oil with 25%bb+PES= No bueno!

 

[Qualityoflife86]

Sounds like it's dissolved pes and not moisture.

Hot oil with 25%bb+PES= No bueno!

I really appreciate your input Jet Labs.
It's still a bit merky when it completely cooled down.
Could another cold filteration through another PES fix that?
And I'm assuming if it is desolved PES, that u wouldn't want to inject that.