Make your own injectable Trenbolone Enanthate in video (step by step)

[monichi]

Make 40ml of Tren Enanthate: 200mg/ml
2%BA and 18%BB
Displacement: 0.909
Boiling point: 69-76°Celcius
Oil: MCT Oil

Now the numbers:
Oil: 24.73 ml
raw: 8 gr
B.A: 0.8 ml
B.B: 7.2 ml

Homebrewing:
step1: pour the mct oil in the first becher
step2: warm oil at 70°C and stir
yes you stir even if there is no mix here but just oil with the same temperature from the top to the botom
step3: weigh raw powder in the second becher
step4: pour your warm oil onto the raw in the second becher
step5: warm to 80°C and stir for 15mn
step6: cool down to 40°C and add BA+BB and stir for 15mn
Benzyl Alcohol 's smoke point is 90°C so you have to cool down oil when you want to mix them.
step7: filter with a serynge filter and a calkgun.

Now, here is the video:


Raw: Trenbolone Enanthate
from: purplepandalabs.com
Benzyl Benzoate, Benzyl Alcohol, sterile vials of 30ml: alphalabsupply.com
hot and stir plate, serynge filter, calkgun, becher: amazon.com, amazon.co.uk, amazon.fr, amazon.es

 

[koast123]

Is it needed to heat the powder to its melting point? I mean, could it dissolve without heat?

 

[Eman]

Is it needed to heat the powder to its melting point? I mean, could it dissolve without heat?

Yes, it can dissolve without heat. Tren is a bit more heat sensitive than other AAS, it is the only compound that I make without any heat at all.

 

[koast123]

Yes, it can dissolve without heat. Tren is a bit more heat sensitive than other AAS, it is the only compound that I make without any heat at all.

Thank you sir! I have time so i prefer not to cook the trenbolone even if it takes a lot.

Anyway, thanks to @monichi for this excellent brew. Nice and clear trenbolone

 

[Eman]

Thank you sir! I have time so i prefer not to cook the trenbolone even if it takes a lot.

Anyway, thanks to @monichi for this excellent brew. Nice and clear trenbolone

I usually just leave it sit and stir it with the BB, when it's pretty much holding I add warmed oil... I've done it with room temp oil also but it's easier to filter and vial with the former.

I didn't watch the full video but it was pretty well done with what I saw, @monichi. Thanks!

 

[monichi]

Tren E can be heat without any pbm from 50°C to 80. Oil and B.B decrease the boiling point of tren E really easily and keep in solution at room temperature

 

[Luckysavi]

Make 40ml of Tren Enanthate: 200mg/ml
2%BA and 18%BB
Displacement: 0.909
Boiling point: 69-76°Celcius
Oil: MCT Oil

Now the numbers:
Oil: 24.73 ml
raw: 8 gr
B.A: 0.8 ml
B.B: 7.2 ml

Homebrewing:
step1: pour the mct oil in the first becher
step2: warm oil at 70°C and stir
yes you stir even if there is no mix here but just oil with the same temperature from the top to the botom
step3: weigh raw powder in the second becher
step4: pour your warm oil onto the raw in the second becher
step5: warm to 80°C and stir for 15mn
step6: cool down to 40°C and add BA+BB and stir for 15mn
Benzyl Alcohol 's smoke point is 90°C so you have to cool down oil when you want to mix them.
step7: filter with a serynge filter and a calkgun.

Now, here is the video:


Raw: Trenbolone Enanthate
from: www.purplepandalabs.com
Benzyl Benzoate, Benzyl Alcohol, sterile vials of 30ml: www.alphalabsupply.com
hot and stir plate, serynge filter, calkgun, becher: amazon.com, amazon.co.uk, amazon.fr, amazon.es

this recipe is without EO

 

[life999]

Make 40ml of Tren Enanthate: 200mg/ml
2%BA and 18%BB
Displacement: 0.909
Boiling point: 69-76°Celcius
Oil: MCT Oil

Now the numbers:
Oil: 24.73 ml
raw: 8 gr
B.A: 0.8 ml
B.B: 7.2 ml

Homebrewing:
step1: pour the mct oil in the first becher
step2: warm oil at 70°C and stir
yes you stir even if there is no mix here but just oil with the same temperature from the top to the botom
step3: weigh raw powder in the second becher
step4: pour your warm oil onto the raw in the second becher
step5: warm to 80°C and stir for 15mn
step6: cool down to 40°C and add BA+BB and stir for 15mn
Benzyl Alcohol 's smoke point is 90°C so you have to cool down oil when you want to mix them.
step7: filter with a serynge filter and a calkgun.

Now, here is the video:


Raw: Trenbolone Enanthate
from: purplepandalabs.com
Benzyl Benzoate, Benzyl Alcohol, sterile vials of 30ml: alphalabsupply.com
hot and stir plate, serynge filter, calkgun, becher: amazon.com, amazon.co.uk, amazon.fr, amazon.es

@monichi hello, can i brew tren A same way of tren E ?

 

[monichi]

@life999 yes

 

[Rx81]

Is there a faster way to fil the vials?

 

[benobeno]

Hi bro
Do the same steps apply to tren a? And is there a step by step guide for test e and test c 300 mg?