Mast E Primo E Blend Recipe

[kdq99]

Trying to find a good recipe for Mast E Primo E blend... I have read a lot of conflicting recipes.
Anyone have any experience blending these 2 compounds?

 

[CrispyRockClimber]

No clue but definitely following for that recipe.

 

[monichi]

I really love these 2 compounds
I have made a video of Primo E 130mg/ml no PIP
For mastE same recipe but with a regular concentration

recipe is 2% BA and 18% BB with MCT oil
Look at my video here if you need help for all steps:

Make 60ml of Primo Enanthate: 130mg/ml
2%BA and 18%BB
Displacement: 0.952
Boiling point: 65-71°Celcius
Oil: MCT Oil
Hormone name: Methenolone Enanthate (Primobolan)

Now the numbers:
Oil: 41 ml
raw: 7.74 gr
B.A: 1.2 ml
B.B: 10.8 ml

Homebrewing:
step1: Weigh the raw in the becher
step2: Calc everything
step3: Pour 41ml oil onto the raw
step4: warm to 50°C and stir for 15mn
even if the boiling point of Primo is about 65°C, adding MCT oil decrease its boiling point !
step5: add BB+BA and stir again for 15mn
Benzyl Alcohol 's smoke point is 90°C so you have to cool down oil when you want to mix them.
step6: cool down below 40°C and filter with a serynge filter and a calkgun.
The max temperature of a serynge filter is max 40°C!

The VIDEO:

 

[kdq99]

I really love these 2 compounds
I have made a video of Primo E 130mg/ml no PIP
For mastE same recipe but with a regular concentration

recipe is 2% BA and 18% BB with MCT oil
Look at my video here if you need help for all steps:

Make 60ml of Primo Enanthate: 130mg/ml
2%BA and 18%BB
Displacement: 0.952
Boiling point: 65-71°Celcius
Oil: MCT Oil
Hormone name: Methenolone Enanthate (Primobolan)

Now the numbers:
Oil: 41 ml
raw: 7.74 gr
B.A: 1.2 ml
B.B: 10.8 ml

Homebrewing:
step1: Weigh the raw in the becher
step2: Calc everything
step3: Pour 41ml oil onto the raw
step4: warm to 50°C and stir for 15mn
even if the boiling point of Primo is about 65°C, adding MCT oil decrease its boiling point !
step5: add BB+BA and stir again for 15mn
Benzyl Alcohol 's smoke point is 90°C so you have to cool down oil when you want to mix them.
step6: cool down below 40°C and filter with a serynge filter and a calkgun.
The max temperature of a serynge filter is max 40°C!

The VIDEO:

Thank you but I am looking for a Primo E/Mast E Blend recipe

 

[monichi]

Well the easy way to think about a blend of hormones is to look at the process of brewing each of them.

So:
Primo E 100mg/ml original recipe is 2%BA 16%BB
Mast E 200mg/ml original recipe is 2%BA 16~17%BB

So speakin' about Blend:
with 2%BA and 17%BB you can have Half of each hormones:
Primo E 50mg/ml + Mast E 100mg/ml

So you can test a high concentration (+20% max) blend:
2%BA and 18%BB:
primoE 60mg/ml
MastE 120mg/ml

 

[kdq99]

Well the easy way to think about a blend of hormones is to look at the process of brewing each of them.

So:
Primo E 100mg/ml original recipe is 2%BA 16%BB
Mast E 200mg/ml original recipe is 2%BA 16~17%BB

So speakin' about Blend:
with 2%BA and 17%BB you can have Half of each hormones:
Primo E 50mg/ml + Mast E 100mg/ml

So you can test a high concentration (+20% max) blend:
2%BA and 18%BB:
primoE 60mg/ml
MastE 120mg/ml

Can you do a 100mg/ml of each?

 

[monichi]

you have to test by yourself
do a small batch of 10ml:

2%BA 18%BB
1gr of primoE
1gr of mastE
it's about 0.900 of liquid displacement
MCT oil 6.2 ml
BA 0.2 ml
BB 1.8 ml

 

[TRT@40]

Can you do a 100mg/ml of each?

I think that is more than likely to work out without any pip.
I and others have brewed primo at 200mg/ml without any pip. Now considering the fact you can brew masteron e at 250-300mg/ml without pip, you should be fine with 100mg/ml of each. Or you can even try 125 mg/ml of each and if there is pip, you can add carrier oil to lower the concentration a little.

For 220mg/ml, I brewed primo e using about 2% BA, 20% BB, 3.5% GUAC, 50% MIG840 and 50% EO. I had bought primo e at 200mg/ml from TGI and he had used only MCT as the carrier.
I recommend 2% BA, 20% BB and MCT or MIG840 or EO. Just make sure to find out before hand that you can tolerate the carrier oil you are thinking of using

 

[kdq99]

I think that is more than likely to work out without any pip.
I and others have brewed primo at 200mg/ml without any pip. Now considering the fact you can brew masteron e at 250-300mg/ml without pip, you should be fine with 100mg/ml of each. Or you can even try 125 mg/ml of each and if there is pip, you can add carrier oil to lower the concentration a little.

For 220mg/ml, I brewed primo e using about 2% BA, 20% BB, 3.5% GUAC, 50% MIG840 and 50% EO. I had bought primo e at 200mg/ml from TGI and he had used only MCT as the carrier.
I recommend 2% BA, 20% BB and MCT or MIG840 or EO. Just make sure to find out before hand that you can tolerate the carrier oil you are thinking of using

So just to clairfy, for a blend off 100mg/ml of Primo E and 100mg/ml Mast E I use 2% BA, 20% BB... and the rest is MCT with either MIG or EO? or could I use just MIG and EO as the carrier?

 

[TRT@40]

So just to clairfy, for a blend off 100mg/ml of Primo E and 100mg/ml Mast E I use 2% BA, 20% BB... and the rest is MCT with either MIG or EO? or could I use just MIG and EO as the carrier?

Yes, you could use just MIG and EO as carrier; this carrier combo would probably hold better than just MCT.
This blend is not really pushing the concentration limits so you could do with any of the options you listed in your last post.

 

[kdq99]

Yes, you could use just MIG and EO as carrier; this carrier combo would probably hold better than just MCT.
This blend is not really pushing the concentration limits so you could do with any of the options you listed in your last post.

Cool thanks. My main concern is PIP. I dont want to go too high on the concentration causing bad PIP