Neo Anabolics (US DOMESTIC)

[readalot]

@Methyl Mike

You can also search for the term chlorobutanol here.

Another bacteriostat used in 200 mg/ml Test E pharma made with sesame oil. Lowest excipient content of any injectable on the market. No BB to your point.

Slow to draw and pin with 29 g but I like it.

 

[NeoAnabolics]

Oh cause axle told us his test is yellow because that just happens when you brew lol

I cannot speak for him or his products. But I have never had that happen with Test Cyp sir.

 

[Turkeybuilder]

Nice little package finally landed today.

Unfortunately where I am it’s freezing cold so all of my vials are crashed besides one. I’ve never dealt with crashed vials yet so I’ll need to look into how to address this. I don’t own any equipment like a warmer or whatnot.

 

[Infernalmango]

Nice little package finally landed today.

Unfortunately where I am it’s freezing cold so all of my vials are crashed besides one. I’ve never dealt with crashed vials yet so I’ll need to look into how to address this. I don’t own any equipment like a warmer or whatnot.

In a pinch - Bowl of pretty hot water. Set vials up right in it. Not so high that water is above caps though.

 

[Turkeybuilder]

In a pinch - Bowl of pretty hot water. Set vials up right in it. Not so high that water is above caps though.

I currently have my vials in a plastic bag, and that plastic bag sitting in a bowl of warm water

Is this only a temporary fix? Or once its uncrashed it’s fine? Ive never had crashed vials before

 

[Infernalmango]

I currently have my vials in a plastic bag, and that plastic bag sitting in a bowl of warm water

Is this only a temporary fix? Or once its uncrashed it’s fine? Ive never had crashed vials before

Typically if the storage environment is warm enough they will stay fine. Although recently there’s been some talk of once a vial crashes, it crashes more easily. Not sure I believe that tho tbh. Warm and shake as necessary basically.

 

[glpfun]

in tg there were a bunch of people throwing away all the gear that arrived crashed lol

 

[Turkeybuilder]

i got all of the vials back into a liquid form but there are still a lot of crystals that wont go away even if I keep them in warm water or move the vial around.. anyone got advice?

 

[Clappincheeks]

i got all of the vials back into a liquid form but there are still a lot of crystals that wont go away even if I keep them in warm water or move the vial around.. anyone got advice?

I had the same issue. I had to uncrash twice. There continued to be small little crystals on the bottom. I ended up using boiled water with a small ceramic flat bottom bowl.

 

[readalot]

i got all of the vials back into a liquid form but there are still a lot of crystals that wont go away even if I keep them in warm water or move the vial around.. anyone got advice?

See figure 11.49

The issue many miss when dealing with supersaturation and ensuring no recrashing once you warm it up.

https://www.sciencedirect.com/topics/engineering/supersaturated-solution

 

[New2theGame!!]

i got all of the vials back into a liquid form but there are still a lot of crystals that wont go away even if I keep them in warm water or move the vial around.. anyone got advice?

Get on Amazon and buy a candle warmer.

 

[Turkeybuilder]

Get on Amazon and buy a candle warmer.

ugh was hoping to avoid needing to buy one of those and get away with just warm water.. kind of annoying lol

so like a hot plate kind of?

 

[New2theGame!!]

ugh was hoping to avoid needing to buy one of those and get away with just warm water.. kind of annoying lol

so like a hot plate kind of?

Type in candle warmer - it’s $13.99 click buy now.

 

[Ryan Veneficus]

I second the candle warmer. I recently used it on some test D that crashed and it worked great within like 15 minutes. You can also boil water either on a stove or in a microwave, then put the vials into the water but keep the water below the cap and leave it in there for several minutes. Just pick them up and stir it around and put it back in and keep doing it until everything dissolves. But the candle warmer works nice you just set them on there and leave it and eventually everything's uncrashed.

 

[Turkeybuilder]

Type in candle warmer - it’s $13.99 click buy now.

I second the candle warmer. I recently used it on some test D that crashed and it worked great within like 15 minutes. You can also boil water either on a stove or in a microwave, then put the vials into the water but keep the water below the cap and leave it in there for several minutes. Just pick them up and stir it around and put it back in and keep doing it until everything dissolves. But the candle warmer works nice you just set them on there and leave it and eventually everything's uncrashed.

Seems like theres two different types of candle warmers. One that looks like a lamp and one that looks like a hot plate. Which one do you use?

 

[AllGoodThings]

Seems like theres two different types of candle warmers. One that looks like a lamp and one that looks like a hot plate. Which one do you use?

I prefer a mug warmer with multiple temp settings. I've got one that has 3 temps, 130's, 150's, and 170's and I've found some compounds are fine on the low setting, while other compounds require the middle setting. Good to have options.

https://a.co/d/gndl7OD

12.99 and has 3 temperature settings

 

[Lilpiggy]

Seems like theres two different types of candle warmers. One that looks like a lamp and one that looks like a hot plate. Which one do you use?

Not to throw in any more confusion but I prefer a mug warmer. This is the exact one I use and does the job.

https://www.amazon.com/dp/B09YCVYCQ2?ref=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&ref_=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&social_share=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&titleSource=true

 

[Miboww]

ugh was hoping to avoid needing to buy one of those and get away with just warm water.. kind of annoying lol

so like a hot plate kind of?

Do you have an “old school” coffee maker? The normal, brew a whole pot kind. Not the gay k-cup one. I’ll take the pot off, turn it on and let my vials sit on the heated plate for a while. Give them some time, swirl them around every now and then and you’re golden.

 

[Turkeybuilder]

I prefer a mug warmer with multiple temp settings. I've got one that has 3 temps, 130's, 150's, and 170's and I've found some compounds are fine on the low setting, while other compounds require the middle setting. Good to have options.

Not to throw in any more confusion but I prefer a mug warmer. This is the exact one I use and does the job.

https://www.amazon.com/dp/B09YCVYCQ2?ref=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&ref_=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&social_share=cm_sw_r_cso_cp_apin_dp_KJNMYZ58EHAG1KCEX5ZD&titleSource=true

Do you have an “old school” coffee maker? The normal, brew a whole pot kind. Not the gay k-cup one. I’ll take the pot off, turn it on and let my vials sit on the heated plate for a while. Give them some time, swirl them around every now and then and you’re golden.

Do you guys put the vials directly onto the warmer? Or a plate then the vial

A mug warmer seems convenient, may just buy one of those instead. I hope the vials dont re-crash after, I usually pin in the morning before the gym/work and wont have time to sit and wait to uncrash vials.. lol

 

[Miboww]

Do you guys put the vials directly onto the warmer? Or a plate then the vial

A mug warmer seems convenient, may just buy one of those instead. I hope the vials dont re-crash after, I usually pin in the morning before the gym/work and wont have time to sit and wait to uncrash vials.. lol

I throw mine directly on