OEP LABS Domestic

[Photon]

It's funny because the most affordable stoppers of them all are the highest quality one. There are so many deal on eBay about west pharma Flurotec stopper that with a bunch of hundred $ you can buy a lifetime supply as a normal user, and as a source well you can still buy enough to make 10000% profit from it xD

Yea i've seen them.
I'm just too lazy to crimp lol

If i did it I'll just re-crimp then terminal sterilize it in an oven..but then again..I don't know what crappy vials some vendors are using..so I'd have to transfer to a new vial either way..

 

[OEP LABS]

Glad to be of help, hopefully they work out for you. Re-vialing is a pain in the neck, and has claimed a few weekend days from me already, so if you make the switch I can see myself making OEP my go to source. High quality products and high quality vials/stoppers are a great combo, a lot of sources only care about the former.

Most definitely would be a lot of labor. I was thinking What I can do is reach to some heavy hitters and move inventory and just make a large volume test the raw for purity even target. Obviously the sale I don’t think would be of god interest here but maybe BOP or the couple of heavy hitter can put a dent. Re vial and brew start
Making the transition. Was just and Idea

 

[OEP LABS]

Was emailing the now on a bulk deal 1000
Or 2000 count. I did find a competitor but my lord these mic on spot

 

[Civdiv]

Hey, Just wanted to say thanks for the solid communication and experience. Less than a week to get here. I'll start running this when I finish my cut in another 7 weeks or so.

Looking forward to running something clean. I need to purge my body of all this foreign oil before my own country tries to install democracy in my ventroglute.

By the way, they look pretty sharp. Doesn't matter I guess but I still like it. Thanks!

 

[OEP LABS]

It's funny because the most affordable stoppers of them all are the highest quality one. There are so many deal on eBay about west pharma Flurotec stopper that with a bunch of hundred $ you can buy a lifetime supply as a normal user, and as a source well you can still buy enough to make 10000% profit from it xD

Well definitely keep that in mind I was looking on eBay and everywhere for different varieties. I lean to those Ohio valley ones because they are Not bulky. When covering the vials I also look at efficiency and time. I’ll get bought both

Hey, Just wanted to say thanks for the solid communication and experience. Less than a week to get here. I'll start running this when I finish my cut in another 7 weeks or so.

Looking forward to running something clean. I need to purge my body of all this foreign oil before my own country tries to install democracy in my ventroglute.

By the way, they look pretty sharp. Doesn't matter I guess but I still like it. Thanks!

View attachment 343482

thank you sir was a pleasure on my end and thank you for given me a
Chance

 

[readalot]

Good news:

View attachment 343461

@MESO-Rx Administrator

I realize most of these go in the special bin, but I nominate @AllGoodThings for member of the quarter. Maybe do some kind of spotlight article on his favorite colors, foods, drugs? Does he like moonlight walks on the beach?

Hell of a member!

Sorry for the glazing.

 

[sionnach]

flow hood

What my girl wears when it's shark week

Hey, Just wanted to say thanks for the solid communication and experience. Less than a week to get here. I'll start running this when I finish my cut in another 7 weeks or so.

Looking forward to running something clean. I need to purge my body of all this foreign oil before my own country tries to install democracy in my ventroglute.

By the way, they look pretty sharp. Doesn't matter I guess but I still like it. Thanks!

View attachment 343482

That actually looks clean AF, classy. No holograms, no graffiti art, super clear product, well crimped. Not bad at all, @OEP LABS

 

[readalot]

Hey, Just wanted to say thanks for the solid communication and experience. Less than a week to get here. I'll start running this when I finish my cut in another 7 weeks or so.

Looking forward to running something clean. I need to purge my body of all this foreign oil before my own country tries to install democracy in my ventroglute.

By the way, they look pretty sharp. Doesn't matter I guess but I still like it. Thanks!

View attachment 343482

Thank you for sharing. You aren't joking. WTF is this?

Beautiful color of Test cyp, shared by customer

 

[Sampei]

What my girl wears when it's shark week

That actually looks clean AF, classy. No holograms, no graffiti art, super clear product, well crimped. Not bad at all, @OEP LABS

Hey what do you have against some nice Holo shine? XD

 

[OEP LABS]

What my girl wears when it's shark week

That actually looks clean AF, classy. No holograms, no graffiti art, super clear product, well crimped. Not bad at all, @OEP LABS

Thank you brother appreciate sincerely

 

[sionnach]

WTF is this?

Lmao I didn't know PSL shopped at AASraw

 

[sionnach]

Hey what do you have against some nice Holo shine? XD

 

[AbsoluteKnight]

View attachment 343520

I’m with that
Need a limited run of some over the top shit like this

 

[OEP LABS]

Stoppers form Ohio valley come tomorrow. Makes more sense let inventory move as it is and just put in the old fashion elbow grease and change out a good chunk of stock. While i do like the specs on Flurotech that deep dish i think will interfere with my fill levels and give you less product.

Emailed them on a bulk deal, Ohio but haven't heard back, will more likely buy more tonight, since they mic out perfect and don't have the deep dish that slides into the vial.

They will definitely go through the same process of sterilization and all, filters will be on during the process.

I'd like to purchase a particle counter to check the purity of the air in the area where I transfer media. I may also do that tonight. Need more Tren Ace too might be an expensive night lol.

Dropped some links and pics. When I transfer media I turn off all the lights and work with a spot light on head, in pitch darkness transferring. With the bright beam in pitch dark you can see the sides of light if the air is clear.

Every vial gets inspected prior to shipment. Without further ado here are the specs of the particle counter. Specs on the filters from the manual, there are 3 in a 87sqft area room. There are ISO standards for quality of air different levels. I think the particle counter you cant beat an investment like that in my opinion, thoughts?

 

[readalot]

thoughts?

I was just thinking about you and then you posted. Wow.

 

[OEP LABS]

I was just thinking about you and then you posted. Wow.

What you think on the particle counter ?

Triplett EPC175 Particle Counter/Air Quality Meter - Detects PM2.5 / PM10 / CO2 / HCHO / TVOC / RH & Temp

The Triplett Model EPC175 Indoor Air Quality Meter displays Particle Count (PM2.5/PM10), Air Temperature, Relative Humidity, Formaldehyde (HCHO) and TVOCs on the 3' Color TFT display with 5 brightness levels.

www.markertek.com

 

[readalot]

What you think on the particle counter ?

Triplett EPC175 Particle Counter/Air Quality Meter - Detects PM2.5 / PM10 / CO2 / HCHO / TVOC / RH & Temp

The Triplett Model EPC175 Indoor Air Quality Meter displays Particle Count (PM2.5/PM10), Air Temperature, Relative Humidity, Formaldehyde (HCHO) and TVOCs on the 3' Color TFT display with 5 brightness levels.

www.markertek.com

Happy to take a look. You are a hard workin man. GN.

 

[Sampei]

What you think on the particle counter ?

Triplett EPC175 Particle Counter/Air Quality Meter - Detects PM2.5 / PM10 / CO2 / HCHO / TVOC / RH & Temp

The Triplett Model EPC175 Indoor Air Quality Meter displays Particle Count (PM2.5/PM10), Air Temperature, Relative Humidity, Formaldehyde (HCHO) and TVOCs on the 3' Color TFT display with 5 brightness levels.

www.markertek.com

It's ok for what you do.

 

[OEP LABS]

It's ok for what you do.

I would think maybe more than just what I do lol. Detects PM2.5um. That’s iso level 2 clean room specs if I’m not mistaken. Which leave only the next level which is iso level 1. There are 9 levels.

 

[AbsoluteKnight]

Stoppers form Ohio valley come tomorrow. Makes more sense let inventory move as it is and just put in the old fashion elbow grease and change out a good chunk of stock. While i do like the specs on Flurotech that deep dish i think will interfere with my fill levels and give you less product.

Emailed them on a bulk deal, Ohio but haven't heard back, will more likely buy more tonight, since they mic out perfect and don't have the deep dish that slides into the vial.

They will definitely go through the same process of sterilization and all, filters will be on during the process.

I'd like to purchase a particle counter to check the purity of the air in the area where I transfer media. I may also do that tonight. Need more Tren Ace too might be an expensive night lol.

Dropped some links and pics. When I transfer media I turn off all the lights and work with a spot light on head, in pitch darkness transferring. With the bright beam in pitch dark you can see the sides of light if the air is clear.

Every vial gets inspected prior to shipment. Without further ado here are the specs of the particle counter. Specs on the filters from the manual, there are 3 in a 87sqft area room. There are ISO standards for quality of air different levels. I think the particle counter you cant beat an investment like that in my opinion, thoughts?

Not just meeting demand/standards, but Going above and beyond not only showing adaptability but open mindedness to better progress is what makes me confident in @OEP LABS as a source can’t wait to try these new things once available my man good fucking work.