OEP LABS Domestic

[cap’nboldenone]

The syringes linked to the guy i replied too for ET syringes had a special thing to minimize dead space. I’ll prob try those out and see looks like it’ll be better than my current situation. I’m losing a fair amount with current syringes unless i inject some air too to push it through.

Those are what I used before switching to mainly slin pins. I measured it out one time and the dead space in those is something like .07cc, but like AGT said you can draw a little bit of air to push that through, just gotta make sure you’re injecting with the plunger side up.

 

[Honeylover6969]

Those are what I used before switching to mainly slin pins. I measured it out one time and the dead space in those is something like .07cc, but like AGT said you can draw a little bit of air to push that through, just gotta make sure you’re injecting with the plunger side up.

Yea of course. I was interested in the 27 5/8” for thighs which i can only seem to find in the insulin syringes. Wish there was leur lock needles at 27g 5/8” but maybe i’ll just be a big boy and go to 25g 5/8”

 

[AllGoodThings]

Coolio, i’m doing around .1 cc so nothing crazy. But i’m also only injecting 1 oil ATM. About to add mast so trying to get my planning down before i’m sitting there wondering what to do after the fact.

From what I've read, the air lock technique specifies up to 0.5cc of air, so I wouldn't have apprehension going up to that amount. I split my injections up into daily administrations, so that can help keep oil volume down, depending on compounds and doses. One of the reasons I prefer Mast E, and other higher concentration options, is simply the smaller oil volume

 

[Honeylover6969]

From what I've read, the air lock technique specifies up to 0.5cc of air, so I wouldn't have apprehension going up to that amount. I split my injections up into daily administrations, so that can help keep oil volume down, depending on compounds and doses. One of the reasons I prefer Mast E, and other higher concentration options, is simply the smaller oil volume

I haven’t been able to find a reliable Mast E source, so i’m just sticking to Mast P for now. I’m okay with daily injects especially since I use Test P every now and then anyways. Although i prefer Cyp/E

 

[k710]

From what I've read, the air lock technique specifies up to 0.5cc of air, so I wouldn't have apprehension going up to that amount. I split my injections up into daily administrations, so that can help keep oil volume down, depending on compounds and doses. One of the reasons I prefer Mast E, and other higher concentration options, is simply the smaller oil volume

The deadspace in needles was messing me up when I first started measuring out my daily doses.

My dose is low, so at 300mg/week im pinning 14units/day. With accounting for the dead space I was prob closer to 20 units.

Now I empty the canula space into the syringe tube (leaving the needle empty) and measure my dose out that way in the barrel. Add my air bubble, flip pin around use that to push out most of the oil in the needle. After pin, I can squeeze the plunger hard af with both hands and can barely get one drop of oil out of it.

I use 1ml luer-locks similar to the ones that ya linked before. Just a different brand but same deisgn

 

[Infernalmango]

The deadspace in needles was messing me up when I first started measuring out my daily doses.

My dose is low, so at 300mg/week im pinning 14units/day. With accounting for the dead space I was prob closer to 20 units.

Now I empty the canula space into the syringe tube (leaving the needle empty) and measure my dose out that way in the barrel. Add my air bubble, flip pin around use that to push out most of the oil in the needle. After pin, I can squeeze the plunger hard af with both hands and can barely get one drop of oil out of it.

I use 1ml luer-locks similar to the ones that ya linked before. Just a different brand but same deisgn

My 3ml syringes seem to account for dead space. I.e if I pull to the 1ml mark, take syringe out of vial, then pull back plunger to say the 2ml mark, the oil goes further than the 1ml mark. To around the .9 mark. So 1.1ml total oil when originally looked like an exact 1ml.

 

[cajunpauper]

Yea of course. I was interested in the 27 5/8” for thighs which i can only seem to find in the insulin syringes. Wish there was leur lock needles at 27g 5/8” but maybe i’ll just be a big boy and go to 25g 5/8”

I use the ET 27g 5/8 pins for quads - for drawing from one vial only (even OEP stoppers) they’re perfectly fine.

 

[Honeylover6969]

I use the ET 27g 5/8 pins for quads - for drawing from one vial only (even OEP stoppers) they’re perfectly fine.

I’ll be drawing from 2 vials so don’t think it’ll work for me. I’ll just deal with the 0.5” or 1” 27g or i’ll put my big boy pants and do with the 25g 5/8”

 

[AllbrandNew]

rom what I've read, the air lock technique specifies up to 0.5cc of air, so I wouldn't have apprehension going up to that amount.

I read similar when I was wrapping my head around IM injections some time ago, but the idea of intentionally injecting an air bubble freaks me out, even knowing that something like .1-.2cc is perfectly safe.

 

[Honeylover6969]

I read similar when I was wrapping my head around IM injections some time ago, but the idea of intentionally injecting an air bubble freaks me out, even knowing that something like .1-.2cc is perfectly safe.

From my reading you could inject over 1cc for a larger individual and be fine, but I personally wouldn’t do it. As long as it’s not intravenous of course lol. Air is relatively safe. I agree thought it makes me uneasy.

 

[dick_starbuck]

I'm not referring to Easy Touch one piece insulin syringes, I only use those for peptides. I'm referring to the Easy Touch 1ml luer lock syringe only product. I attach a 22g for drawing all oils, then swap to a thinner needle like a 27 or 30g for injecting. I hate back loading insulin syringes, and don't bother with that. These 1ml luer locks have no noticeable dead space, there's just the tiniest bit of oil residue left after an injection, not enough to amount to anything remotely significant.

EasyTouch Luer Lock Tuberculin Syringe Barrels, TB, 1ml, 100/Box

A clear barrel is a better barrel! EasyTouch Barrels are designed and manufactured to be ultra clear with well defined markings. Designed with minimal dead space.Ultra-clear BarrelWell-defined MarkingsSmooth Surface for Low Friction DispensingLatex Free

www.shopmedvet.com

This is exactly what I do. Works great.

 

[OEP LABS]

Thank you all for being patient with me, the anabolic pigeon is preparing his heavy luggage, more than half of the requests have been completed. Each invoice was given the boutique service, I would like to call it, meaning each item was inspected thoroughly, well packaged and then the receipt issued to the client. There are less then half remaining but at this time would like to regain strength, grab some food and roughly 5hrs of rest, then continue to the battle. It will get completed.

I keep getting asked if there is any TD-500 left and truthfully there is maybe about 10 or so left but when I put the work stoppage yesterday I had to decline some future clients and I apologize for that. Emails continued to come in for that compound. So I would like to give those clients the fair opportunity to grab them if they want first, then continue from there.

Thank you Meso for having me, brief intermission but I will get back to work diligently very soon!

 

[dick_starbuck]

Thank you all for being patient with me, the anabolic pigeon is preparing his heavy luggage, more than half of the requests have been completed. Each invoice was given the boutique service, I would like to call it, meaning each item was inspected thoroughly, well packaged and then the receipt issued to the client. There are less then half remaining but at this time would like to regain strength, grab some food and roughly 5hrs of rest, then continue to the battle. It will get completed.

I keep getting asked if there is any TD-500 left and truthfully there is maybe about 10 or so left but when I put the work stoppage yesterday I had to decline some future clients and I apologize for that. Emails continued to come in for that compound. So I would like to give those clients the fair opportunity to grab them if they want first, then continue from there.

Thank you Meso for having me, brief intermission but I will get back to work diligently very soon!

Is there an ETA on more TD-500? Id like to get in on the next round haha.

 

[Honeylover6969]

Thank you all for being patient with me, the anabolic pigeon is preparing his heavy luggage, more than half of the requests have been completed. Each invoice was given the boutique service, I would like to call it, meaning each item was inspected thoroughly, well packaged and then the receipt issued to the client. There are less then half remaining but at this time would like to regain strength, grab some food and roughly 5hrs of rest, then continue to the battle. It will get completed.

I keep getting asked if there is any TD-500 left and truthfully there is maybe about 10 or so left but when I put the work stoppage yesterday I had to decline some future clients and I apologize for that. Emails continued to come in for that compound. So I would like to give those clients the fair opportunity to grab them if they want first, then continue from there.

Thank you Meso for having me, brief intermission but I will get back to work diligently very soon!

Is there a current price sheet to go off of? I couldn’t ind it in original post maybe im totally blind

 

[AllbrandNew]

Is there a current price sheet to go off of? I couldn’t ind it in original post maybe im totally blind

Go back a few pages, there's a pastebin link that was posted just before he went live again last night.

 

[Dial It In]

Is there an ETA on more TD-500? Id like to get in on the next round haha.

I swore off 400 and 500 blend years ago but I gotta be honest. The way this pinned I would consider going back. You get it you’ll enjoy or I’ll gladly take it off your hands

 

[AlexDavis43]

One of the reasons I prefer Mast E, and other higher concentration options, is simply the smaller oil volume

100%

No plans of going back to 100 mg/mL of anything, anytime soon

Low weekly oil inj volume with lots of gear feels like a cheat code

 

[Honeylover6969]

100%

No plans of going back to 100 mg/mL of anything, anytime soon

Low weekly oil inj volume with lots of gear feels like a cheat code

I think if i had access to Mast E i’d go with it but im using Mast P through Primal atm well i just ordered so will see how it goes

 

[Jsilk757]

Honest question for those with experience here:

I’m currently using a Test 400 blend (200 mg Cypionate / 200 mg Enanthate). It has a mild bite, but nothing major. When I started seeing all the discussion about @OEP LABS T500 having zero PIP or bite, I was definitely interested. However, since I’ve never used Test D before, I decided to dig into the details first.

From what I found, dosing the same weekly milligrams of Test D vs. Test C (with once-per-week injections) produces a significant difference in overall serum testosterone saturation.

For reference, the data I came across compared 12 weeks of once weekly injections:

• Test C: Peak around 3,200 ng/dL
• Test D: Peak around 6,700 ng/dL

Given that difference, it seems like Test D might be trickier to dial in—whether you’re running a cycle or cruising.

So my question is: Am I missing something here, or is that generally an accurate comparison between Test C and Test D?


Appreciate any insight from those who’ve used both. Thanks in advance!

 

[newguy2]

Honest question for those with experience here:

I’m currently using a Test 400 blend (200 mg Cypionate / 200 mg Enanthate). It has a mild bite, but nothing major. When I started seeing all the discussion about @OEP LABS T500 having zero PIP or bite, I was definitely interested. However, since I’ve never used Test D before, I decided to dig into the details first.

From what I found, dosing the same weekly milligrams of Test D vs. Test C (with once-per-week injections) produces a significant difference in overall serum testosterone saturation.

For reference, the data I came across compared 12 weeks of once weekly injections:

• Test C: Peak around 3,200 ng/dL
• Test D: Peak around 6,700 ng/dL

Given that difference, it seems like Test D might be trickier to dial in—whether you’re running a cycle or cruising.

So my question is: Am I missing something here, or is that generally an accurate comparison between Test C and Test D?


Appreciate any insight from those who’ve used both. Thanks in advance!


View attachment 352896 View attachment 352897

I think that actual test level numbers on these plotters are to be taken with a grain of salt. Their use is primarily on comparing how an ester will build up.