OEP LABS Domestic

[crispybacon!]

bear with me on grammar and spelling hauling butt trying to get back on schedule due to a repair on the flow hood came in damaged. I repaired it

First and foremost thank you all for the solid feedback and words I cant express enough that it does not go un-noticed. I also want to thank those members following who have help new comers on the thread, by either directing them to the pastebin or even hplc lab reports. Any help is appreciated I mean that sincerely as I am a 1 man team. Ok ill get straight to the points so everyone can chime on what we shall do. I always want the community's opinion

I have 4 paid HPLC or raw material checks. For sure we will send the Test Decaonate 500 without a doubt. Ok in regards to that for transparent reasons. There was a very small batch made possibly 20-30 vials, TD-500. The small batch was made because I didn't believe @Photon when he said it would hold at 22BB at 500mg, few pages back we can find the convo.

Ok so on paper and math the small batch was made at exactly 500mg/ml.

However, noticing that our raw material was coming back always with a degradation of 7-9% on each raw material. I decided for the remaining larger amount to input that degradation into the equation to be certain and hit the target. I did state this and posted it as well let everyone know if there was pip next day which there was not. Okay I didn't throw away the small batch I have some myself along with other members. The question is do we test both of the TD500s? I have no problem doing it. This arose when a member brought it to light to me therefor I want it out in the open and I can send both no issues. That be great if the light one hit 500mg and the darker one hit 550mg that's if the raw material would be 98% pure but it has not been

Please let me know if I should send both TD500 out for testing along with other oils or raw materials

I have the darker batch of TD500, so would definitely want to see that tested. But I imagine those with the lighter batch would too. Was the small/light-colored batch the samples you sent, or were those sold also?

 

[OEP LABS]

It's a wild market. Put the prices wherever they make it worth your time. Same for minimums, single vial orders are a timesuck that keep you out of the lab (and away from family).

It is a very wild market indeed, thankful we have materials in route to say the least. TE is also closing in on BatchB6. Thankfully this past opening TE wasn’t so popular. Thank my man for your input

 

[OEP LABS]

I have the darker batch of TD500, so would definitely want to see that tested. But I imagine those with the lighter batch would too. Was the small/light-colored batch the samples you sent, or were those sold also?

Both and I also for my personal self have both light and dark. About 9 left for my personal self. Say less we will send both.

 

[RockyP]

@OEP LABS was going to Pm you about this but it may interest other folks too. Any issues shipping the oral suspensions during winter / to colder climates. I know there is ETOH in there but was not sure of the rest of the solution / freezing points etc.

 

[OEP LABS]

@OEP LABS was going to Pm you about this but it may interest other folks too. Any issues shipping the oral suspensions during winter / to colder climates. I know there is ETOH in there but was not sure of the rest of the solution / freezing points etc.

Good question as some members have asked me to do suspensions without vodka so that may be an issue during winter times.

With the vodka it is no issue though.

 

[RockyP]

Good question as some members have asked me to do suspensions without vodka so that may be an issue during winter times.

With the vodka it is no issue though.

If they start requesting specific brands / flavors of vodka tell them to take a hike! You’re busy enough brother. We appreciate you!

 

[JBird99]

bear with me on grammar and spelling hauling butt trying to get back on schedule due to a repair on the flow hood came in damaged. I repaired it

First and foremost thank you all for the solid feedback and words I cant express enough that it does not go un-noticed. I also want to thank those members following who have help new comers on the thread, by either directing them to the pastebin or even hplc lab reports. Any help is appreciated I mean that sincerely as I am a 1 man team. Ok ill get straight to the points so everyone can chime on what we shall do. I always want the community's opinion

I have 4 paid HPLC or raw material checks. For sure we will send the Test Decaonate 500 without a doubt. Ok in regards to that for transparent reasons. There was a very small batch made possibly 20-30 vials, TD-500. The small batch was made because I didn't believe @Photon when he said it would hold at 22BB at 500mg, few pages back we can find the convo.

Ok so on paper and math the small batch was made at exactly 500mg/ml.

However, noticing that our raw material was coming back always with a degradation of 7-9% on each raw material. I decided for the remaining larger amount to input that degradation into the equation to be certain and hit the target. I did state this and posted it as well let everyone know if there was pip next day which there was not. Okay I didn't throw away the small batch I have some myself along with other members. The question is do we test both of the TD500s? I have no problem doing it. This arose when a member brought it to light to me therefor I want it out in the open and I can send both no issues. That be great if the light one hit 500mg and the darker one hit 550mg that's if the raw material would be 98% pure but it has not been

In regards to stock i will show some members tonight what and how batch A6 TC looks like, we have material however batchA6 is coming near its end I would it has 1 more round in it.

Stock in regards to material is okay not best, TRA gone no oil no material. SUS no oil no material, however both are in route. TC for future, TU, Deca, TRE, NPP, are all okay. EQ is flying we have material I said I wouldn't raise the price but considering raising the minimum thoughts?


The flow vent was shipped damaged on the corner. Here shortly I will post a pic. It took me all of 10hrs to bend back the sheet metal, bust the rivets, drill new holes with fasteners and put it back together. I'm still pushing to still open for Monday but the flow vent repair may have delayed me 1 day let see how far I get this weekend.

Please let me know if I should send both TD500 out for testing along with other oils or raw materials

Raise the minimum if you must that way you’re not being taken away for small orders

 

[RockyP]

Hope I don’t get flamed for this but I think a $300 minimum is more than reasonable given the quality of product and pricing.

 

[OEP LABS]

I agree that members would rather see a higher minimum vs higher priced products.

 

[AllGoodThings]

Hope I don’t get flamed for this but I think a $300 minimum is more than reasonable given the quality of product and pricing.

I'd personally be fine with this, especially considering our guy Pench is a one man operation.

 

[CHIEF M]

Another @OEP LABS order came through on the anabolic porch some test c tren ace and npp

 

[OEP LABS]

In all Honesty 95% already hit the minimum I had in mind which was 250. There maybe 1-2 out 15 that day that may not, but hey those 2 might be 45min i could be brewing in the concoction room. Thanks Men for your input as always! My man @RockyP always making me laugh

 

[OEP LABS]

Anabolic pigeon better be doing his job or will get 30 lashings and 50 Hail Marys !

 

[AllGoodThings]

Another @OEP LABS order came through on the anabolic porch some test c tren ace and npp

We're in synch, just had an OEP order show up today as well.

 

[JBird99]

We're in synch, just had an OEP order show up today as well.

You’re not stocked enough for the next 50 years at this point?!

 

[Oldhand]

I said I wouldn't raise the price but considering raising the minimum thoughts?

Please let me know if I should send both TD500 out for testing along with other oils or raw materials

Raising the minimum is definitely worth consideration. Mailing fewer packs with more items in each pack reduces exposures and in turn reduces risk. I think safety/security alone makes this a good idea.there are more perks others have mentioned that are totally valid.

As far as testing both TD 500 oils; I don’t think it is necessary. If you test one, you can use the same 7%-9% adjustment on the other batch…. Like if the hot one is 550mg, you can bank on the other one being 505mg-515mg or so. Testing just one will automatically let you know what the other is.

 

[cajunpauper]

The fanboy lid has me riding the struggle bus.

 

[Photon]

Both and I also for my personal self have both light and dark. About 9 left for my personal self. Say less we will send both.

Did you charge for the light vials?
If it's foc, i wouldn't bother testing it.

 

[AllGoodThings]

You’re not stocked enough for the next 50 years at this point?!

Not on every compound, no. I think the rumors of my stash have grown beyond the reality of it by a good margin at this point lol
I have at least a handful of compounds I'd like to have another 40-50 vials of still, and despite possible assumptions, I'm actually pretty darn poor haha, so it might not happen before things dry up, sadly. I did have a decent chunk of btc I utilized to build my stash, but that's dwindled considerably. If you're starting to feel bad for me at this point, I can DM my btc address for donations.

 

[cajunpauper]

Not on every compound, no. I think the rumors of my stash have grown beyond the reality of it by a good margin at this point lol
I have at least a handful of compounds I'd like to have another 40-50 vials of still, and despite possible assumptions, I'm actually pretty darn poor haha, so it might not happen before things dry up, sadly. I did have a decent chunk of btc I utilized to build my stash, but that's dwindled considerably. If you're starting to feel bad for me at this point, I can DM my btc address for donations.

Now we just need to get you a sweet case for those beautiful vials.

Not me; I clearly can't make this darned case.