hcgfiend123456
Member
cheap masteron/primo?
MESO-Rx
Anabolic Steroids
OEP LABS Domestic
- Thread starter OEP LABS
- Start date
hcgfiend123456
Member
Amen
RockyP
Member
Pench is working on the Mast 150. Primo idk
OEP LABS
Subscriber
Yessir @RockyP mast prop 150mg/ml.
Until it’s in my hands won’t get too excited, however TRA and SUS have passed enemy territory. Will send these off as well for a purity report, as well as everything incoming. That will be the SOP for all material incoming along with a hplc finished oil report.
May even entertain keeping 20-25g of each material on deck. That way if the hplc is slightly off can always dissolve said material whichever compound it may be and add it concentrated, solvents/raw no carrier. Obviously do some math prior to just dumping it in the beaker. Apologies taking out loud again.
Were looking pretty good Men.
Until it’s in my hands won’t get too excited, however TRA and SUS have passed enemy territory. Will send these off as well for a purity report, as well as everything incoming. That will be the SOP for all material incoming along with a hplc finished oil report.
May even entertain keeping 20-25g of each material on deck. That way if the hplc is slightly off can always dissolve said material whichever compound it may be and add it concentrated, solvents/raw no carrier. Obviously do some math prior to just dumping it in the beaker. Apologies taking out loud again.
Were looking pretty good Men.
Erock523
Member
This is what we love to hear brother!
Vikingo
Member
Pack landed yesterday, great communication fast shipping once again from Pench! Unfortunately I’m out of town and have to wait till I get home Friday to open my goodies. Wife sent me a picture of the package and put it in my gun safe for safe keeping till I get home.
Oldhand
Member
She’s a keeper!
CharlesV
Member
keeper for real!
i try to time my packs so they land when i am in town. i hate it when i get the text that post had delivered but i’m not in town to receive it. i have folks & fam that can get the mail, but nobody i trust enough to know what’s inside. certainly nobody who can get into the safe.
TanFishMan
Member
Any tips for accurately measuring my oral suspension? No markings on the dropper, so I’m just guessing close enough?
AllbrandNew
Member
I measured the dropper volume average and it's roughly .5ml per, on a 'normal' draw, which is just a bit less than half the dropper full.
1ml oral syringes. Pretty cheap on amazon
Are these the 1ml versions you referenced?Just came across these syringes
3 ml Low Dead Space Syringe - Polypropylene Luer Lock - Exel | Delasco - Delasco
The Exel Luer Lock Syringe comes in a box of 100 pieces. Built with a positive plunger stop to prevent spillage when drawing. Shop today at Delasco.com!www.delasco.com
Does anyone have any experience using these?
Btw those Nipros are so damn smooth I know it’s been beat to death but damn have you guys given me every excuse to buy new needles and syringes even though I have a fuck ton of both already. Btw do yall have a link for the proper filters that can filter oil? I can’t seem to find the right ones and the ones I’ve found online are OOS. Appreciate in advance!
Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe - Delasco - Delasco
The Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe is a precise medical instrument designed to minimize medication waste and ensure accurate dosing. Shop Delasco today!
www.delasco.com
Last edited:
OEP LABS
Subscriber
I’ve purchased the 1ML oral syringes recently and will start including them with every invoice that contains a suspension apologies I ran out. I’ve had some email and pms regarding dose or how to administer. Shake hard pull the desired dose whether it be half, 1ML or even 1.5ML.
My particular favorite, Var. 1ML 50mg/ml approximately 1hr before training. Lovely mad blood flow, absolutely pumped !
Photon
Member
Are these the 1ml versions you referenced?
Does anyone have any experience using these?
Btw those Nipros are so damn smooth I know it’s been beat to death but damn have you guys given me every excuse to buy new needles and syringes even though I have a fuck ton of both already. Btw do yall have a link for the proper filters that can filter oil? I can’t seem to find the right ones and the ones I’ve found online are OOS. Appreciate in advance!
Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe - Delasco - Delasco
The Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe is a precise medical instrument designed to minimize medication waste and ensure accurate dosing. Shop Delasco today!
I posted this elsewhere, but copying it here.
Most expensive but allows you to buy 10 pc.
peptidetest.com
ONLY GET products with USA Warehouse (Tariff Exemption within U.S.)
Else it'll ship from China and you get hit with some 20-50% fee.
100 pc.
shop.cobetter.com
Cheapest is AliExpress get .22 PTFE sterile Hydrophobic from KS-Tek.
Shipping took 4 days...
Most expensive but allows you to buy 10 pc.
Tisch Scientific Filter Syringe .22μm PTFE 25mm - Sterile Individually
Brand: Tisch ScientificSpecifications & Description: Filter Medium: PTFE Diameter(mm): 25 Pore Size(μm): 0.22 Moisture level: Hydrophobic Sterile: Yes Housing Material: Medical grade PP Connections(Inlet/Outlet): Female Luer Lock inlet and Male Luer slip outlet
peptidetest.com
ONLY GET products with USA Warehouse (Tariff Exemption within U.S.)
Else it'll ship from China and you get hit with some 20-50% fee.
100 pc.
Syringe Filters with Male Luer Lock Outlet
Sterile hydrophobic PTFE syringe filters with male luer lock outlet. Pore size: 0.22μm. Diameter of 25mm. Sterile by gamma irradiation. For sterile filtration of air and gas.
shop.cobetter.com
Cheapest is AliExpress get .22 PTFE sterile Hydrophobic from KS-Tek.
Shipping took 4 days...
Thank you!I posted this elsewhere, but copying it here.
Most expensive but allows you to buy 10 pc.
Tisch Scientific Filter Syringe .22μm PTFE 25mm - Sterile Individually
Brand: Tisch ScientificSpecifications & Description: Filter Medium: PTFE Diameter(mm): 25 Pore Size(μm): 0.22 Moisture level: Hydrophobic Sterile: Yes Housing Material: Medical grade PP Connections(Inlet/Outlet): Female Luer Lock inlet and Male Luer slip outlet
ONLY GET products with USA Warehouse (Tariff Exemption within U.S.)
Else it'll ship from China and you get hit with some 20-50% fee.
100 pc.
Syringe Filters with Male Luer Lock Outlet
Sterile hydrophobic PTFE syringe filters with male luer lock outlet. Pore size: 0.22μm. Diameter of 25mm. Sterile by gamma irradiation. For sterile filtration of air and gas.
Cheapest is AliExpress get .22 PTFE sterile Hydrophobic from KS-Tek.
Shipping took 4 days...
I was looking for that post because I swear I saw you share it in another thread but I didn’t want to keep bugging you for info. Much appreciated!
Just for a general rule of thumb how many mls of oil should I be able to filter per? I also saw you had some IV tubing in another thread with a needle do you have a link for one you’d recommend?
Last edited:
Vikingo
Member
She’s a wonderful wife and mother! I’m very blessed!
Vikingo
Member
She’s retired law enforcement and can shoot better than me! Half the hardware in that safe is hers, you better believe she has the combination!
Infernalmango
Member
I think I got my syringe filters on Ali express. 50 for like 58$?Are these the 1ml versions you referenced?
Does anyone have any experience using these?
Btw those Nipros are so damn smooth I know it’s been beat to death but damn have you guys given me every excuse to buy new needles and syringes even though I have a fuck ton of both already. Btw do yall have a link for the proper filters that can filter oil? I can’t seem to find the right ones and the ones I’ve found online are OOS. Appreciate in advance!
Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe - Delasco - Delasco
The Exel 1 ml Tuberculin Luer Lock Low Dead Space Plunger Syringe is a precise medical instrument designed to minimize medication waste and ensure accurate dosing. Shop Delasco today!
As for the nipros, I bought 1 box to start with, loved them. Bought 10 cases the following week lol.
Attachments
OEP LABS
Subscriber
I’m fooling around with the PW blend and cleaning residual leftover oil off all glass.
Always thinking in this room with all the filters running. Random thought, open up for suspensions only drop the minimum. That way when we do open majority of members already got their suspension in place no delays. Can do like a 3-5 day opening for suspensions. Just thinking out loud Men
Always thinking in this room with all the filters running. Random thought, open up for suspensions only drop the minimum. That way when we do open majority of members already got their suspension in place no delays. Can do like a 3-5 day opening for suspensions. Just thinking out loud Men
Turkeybuilder
Member
What about being open 24/7 for orals / peptides / suspensions with no minimum, and then when you’re ready to sell oils again you add the minimum and update stock. That way you never really have to close up shop, and people can still come to you for things non oil related when needed. It won’t be as busy as when you have oils up for sale so you will still have time to work and do whatever else you need to do.
Similar threads
