OEP LABS Domestic

[Erock523]

Ahh I gotcha. Thanks fellas. I’m all for smoother injections and less pip!

 

[danny91t]

Hey Pench, thoughts on getting some TNE on the menu?

 

[ZaddyZonar]

Hey Pench, thoughts on getting some TNE on the menu?

TNE with no harsh solvents would fly off the shelves. I’m all for it and other injectable PWOs

@OEP LABS TNE, Inj anadrol, Inj superdrol when? lol

 

[OEP LABS]

Hey Pench, thoughts on getting some TNE on the menu?

Definitely will hunt it down. Pretty good at being relentless hunting things down.

In regards to MiG 812. Let’s give it the green light, just ordered a solid amount of it.

 

[Photon]

I’m running ment at 25mg a day. It’s been treating me very well at this dose and I have plans on upping it. I’m holding just a touch of water, so I can tell increasing it would make me spill over and I don’t want that.

There are some similarities with ment and dbol, that is why I asked how dbol treats you.

How would you compare it to dbol on a dose to dose basis in terms of e2 sides, on a feels basis?

 

[danny91t]

TNE with no harsh solvents would fly off the shelves. I’m all for it and other injectable PWOs

@OEP LABS TNE, Inj anadrol, Inj superdrol when? lol

Or Tren Base!

 

[Oldhand]

How would you compare it to dbol on a dose to dose basis in terms of e2 sides, on a feels basis?

So far, I have a rougher time on dbol than ment- which contradicts everything I’ve read.
I’m careful with these high aromatizing compounds- I haven’t had to run an AI in years and would like to keep it that way.

I’m having a little bit of water retention on 25mg ED of ment. Not a lot, but I see it on my abs and chest. I’ve noticed no other negative sides.

When I take dbol I run it at 50mg ED. I know to take a few days off of it once my nips get a little sore. Over time I’ve learned dbol works good for me 5 days on 2 days off.

Again, it needs to be said that it’s my first run on ment. If I upped the dose from 25mg to 50mg a day, maybe then I would see sides…. I don’t know.

 

[Photon]

What’s benefits of MiG vs MCT?

Mig is a brand

Mig812 is MCT that is subjected to strict standards. Buying extremely high quality pharmaceutical grade oil would more or less be of the same quality or with negligible difference. Buying the branded oil just guarantees said quality.

Mig840 is a synthetic variant of MCT, modified to be thinner and be able to dissolve more API. Unfortunately, 840 does breakdown into propylene glycol, which some people are allergic too (interestingly PG is in majority of the skincare/hair/soap products).

 

[Honeylover6969]

Got bloods done with quest labs, taken fasted at 8:30 am currently only on OEP labs stuff. Week 9 on bulk + cycle

All OEP Taking 350 test (from OEPs test dec) , 350 deca, 125mg eq, and 6iu gh, just introduced Adrol as well at 25mg a week (also from Oep)

Rosuvastatin, Nebivolol, and T4

 

[Photon]

Without rambling too much moved onto a smart dosing peristaltic pump with network capabilities. Along with PTFE capsule filters and captured some associated accessories that conjoin the GL45 glass media bottles all together with the peristaltic pump. All under that 48 inch flow hood. Question though? While I haven't had any complaints I'm still open minded.

Good news.

You know my stance on polystyrene bottle-tops, just glad to see more vendors move away from those. For the pump, I'd just avoid PVC tubing (the most common material). I know there's PTFE tubing but I don't use pumps so I'd refrain from commenting any further.

https://marcordev.com/wp-content/uploads/2019/08/MIGLYOL_812_N_Excipient_TDSH.pdf

 

[OEP LABS]

Got bloods done with quest labs, taken fasted at 8:30 am currently only on OEP labs stuff. Week 9 on bulk + cycle

All OEP Taking 350 test (from OEPs test dec) , 350 deca, 125mg eq, and 6iu gh, just introduced Adrol as well at 25mg a week (also from Oep)

Rosuvastatin, Nebivolol, and T4

Look at those numbers per week…2800ng/dl at 350mg per week. May I ask if this is the new TD500 sir or the older version? Very nice responser either way.

Good news.

You know my stance on polystyrene bottle-tops, just glad to see more vendors move away from those. For the pump, I'd just avoid PVC tubing (the most common material). I know there's PTFE tubing but I don't use pumps so I'd refrain from commenting any further.

View attachment 367960

https://marcordev.com/wp-content/uploads/2019/08/MIGLYOL_812_N_Excipient_TDSH.pdf

I definitely listen when you post my man. I may not talk alot but il listen that’s for sure. Thank you for keeping us all informed on your recent findings, trust me it doesn’t just get over look, promise you.

I had planed to purchase PTFE tubing but another brewer had advised me the tubing was too hard. He’s pretty advanced with his equipment. He sent a sample of his tubing to jano to check for signs of leeching or similar discrepancies found none at that time. However, there must be some type of advanced PTFE tubing that can be used. Tomorrow I’ll contact this Lab company I’ve purchased several items from, I’ll pick their mind to see what they have to say.

 

[Honeylover6969]

Look at those numbers per week…2800ng/dl at 350mg per week. May I ask if this is the new TD500 sir or the older version? Very nice responser either way.


I definitely listen when you post my man. I may not talk alot but il listen that’s for sure. Thank you for keeping us all informed on your recent findings, trust me it doesn’t just get over look, promise you.

I had planed to purchase PTFE tubing but another brewer had advised me the tubing was too hard. He’s pretty advanced with his equipment. He sent a sample of his tubing to jano to check for signs of leeching or similar discrepancies found none at that time. However, there must be some type of advanced PTFE tubing that can be used. Tomorrow I’ll contact this Lab company I’ve purchased several items from, I’ll pick their mind to see what they have to say.

These bloods were the older batch. But i did get some of the newer!

 

[crispybacon!]

HD thank you sir, I wholeheartedly value your opinion and always look forward to seeing it.

During the slower end of this transition I've had the opportunity to upgrade equipment. While looking around I couldn't help myself pick up some volumetric flasks and graduated cylinders for accurate dosing. At the same left the bottle top filters, not forever though as they will always have a place for correcting and actually seeing what's really going on during the filtration.

Without rambling too much moved onto a smart dosing peristaltic pump with network capabilities. Along with PTFE capsule filters and captured some associated accessories that conjoin the GL45 glass media bottles all together with the peristaltic pump. All under that 48 inch flow hood. Question though? While I haven't had any complaints I'm still open minded.

Should we make the move to Mig812 carrier for all compounds?

That’s a lot of impressive upgrades, plus the Mig812. Thanks for continuing to improve!

 

[OEP LABS]

These bloods were the older batch. But i did get some of the newer!

At your convenience sir email got some credit for you my man

That’s a lot of impressive upgrades, plus the Mig812. Thanks for continuing to improve!

Thank you Crispy

 

[Slicknyc]

Got bloods done with quest labs, taken fasted at 8:30 am currently only on OEP labs stuff. Week 9 on bulk + cycle

All OEP Taking 350 test (from OEPs test dec) , 350 deca, 125mg eq, and 6iu gh, just introduced Adrol as well at 25mg a week (also from Oep)

Rosuvastatin, Nebivolol, and T4

I assume you did just 1 injection per week at .7ml? IM? How are you feeling on that stack?

 

[Savagesteve]

That’s a lot of impressive upgrades, plus the Mig812. Thanks for continuing to improve!

Mig812 ftw. Haven’t seen it in a long time and it’s my favorite.

 

[heavydutygorilla]

HD thank you sir, I wholeheartedly value your opinion and always look forward to seeing it.

During the slower end of this transition I've had the opportunity to upgrade equipment. While looking around I couldn't help myself pick up some volumetric flasks and graduated cylinders for accurate dosing. At the same left the bottle top filters, not forever though as they will always have a place for correcting and actually seeing what's really going on during the filtration.

Without rambling too much moved onto a smart dosing peristaltic pump with network capabilities. Along with PTFE capsule filters and captured some associated accessories that conjoin the GL45 glass media bottles all together with the peristaltic pump. All under that 48 inch flow hood. Question though? While I haven't had any complaints I'm still open minded.

Should we make the move to Mig812 carrier for all compounds?

These updates and upgrades, wow man!! Absolutely stellar seeing this care into the production for all of us. I definitely wouldn't mind the Mig812 at all, never had an issue with your MCT for the record though! I'll be honest brother, whatever you brew, I'm buying because I never have to question the quality when it comes to what you produce!