OEP LABS Domestic

I’d personally like it to be left as is, nothing a little bit of heat prior to pinning can’t fix

I agree, if PWO crashes it is acceptable. That is the trade off paid for not using the harsh solvents.
Agreed. Heating isn’t exactly a major inconvenience. Just wanted anyone who’s thinking of using injectable anadrol to be aware that it’s not really an optional step. But much better than using guiacol or other / greater amounts / toxic solvents.
 
Thanks for the updates Pench, appreciate the work you do.

I agree with the others, sending off as they come in and having the brewing more spread out is better. I would rather you be able to go at a normal pace and not feel rushed
 
OEP,

Had bought a couple of things from your line and live in warm climate area but my NPP seems to have crashed. Help!
@Talmad offered you great advice. I’m guessing you haven’t run into crashed gear too often since you live in a warm area. Once you reclaim your crashed gear, look at the bottom of the vial-if you see small particles you need a little more heat/time.

If warm/hot water doesn’t do it and you don’t have a mug holder/candle warmer there are other things around the house that will work…coffee maker, oven, stove top, etc.

This happens to gear a lot. I’m guessing you had this in the basement or by your air conditioner???
 
OEP,

Had bought a couple of things from your line and live in warm climate area but my NPP seems to have crashed. Help!
Touch base with my man and we will fix it 100%. There will always be resolutions with me.

Men If there are more NPP crashing please let me know and I will adjust the BB content. I'll make note of this no matter.

Another Announcement
I've been receiving a lot of emails about opening day, In regards to when is the date going to be. My answer usually always falls back on when all the purity reports come back we can compound the materials correctly. From that point forward we can place a good date on it.

In my opinion, That is the proper way, is to wait for all the purity reports to come in before synthesizing the materials. Not to mention some materials are still in route, more TD, TRA, more Halo there not far but little bit of time is all.

I understand some materials can be detected using bloodwork. However, let us not forget our history. We ran into 2 incorrect reports that were blends and not what they were intended to be. In short summary you're shooting in the dark without the report. I understand, yes we have done that in the past but if we can avoid it in the future, we should try at best.

We are in que for receiving purity reports from Jano Team especially for TCA8 which is a solid amount. I will email him to see how we look. Filters come in tomorrow according to tracking.

Those few clients waiting on TC and TE on me, I have not forgotten. You will be made whole 100%.

I'll continue to make updates to the list. Ill do all the work I can in preparation of opening day. Communication will always be open and we will always have a resolution. Don't hesitate to reach out to me
 
Touch base with my man and we will fix it 100%. There will always be resolutions with me.

Men If there are more NPP crashing please let me know and I will adjust the BB content. I'll make note of this no matter.

Another Announcement
I've been receiving a lot of emails about opening day, In regards to when is the date going to be. My answer usually always falls back on when all the purity reports come back we can compound the materials correctly. From that point forward we can place a good date on it.

In my opinion, That is the proper way, is to wait for all the purity reports to come in before synthesizing the materials. Not to mention some materials are still in route, more TD, TRA, more Halo there not far but little bit of time is all.

I understand some materials can be detected using bloodwork. However, let us not forget our history. We ran into 2 incorrect reports that were blends and not what they were intended to be. In short summary you're shooting in the dark without the report. I understand, yes we have done that in the past but if we can avoid it in the future, we should try at best.

We are in que for receiving purity reports from Jano Team especially for TCA8 which is a solid amount. I will email him to see how we look. Filters come in tomorrow according to tracking.

Those few clients waiting on TC and TE on me, I have not forgotten. You will be made whole 100%.

I'll continue to make updates to the list. Ill do all the work I can in preparation of opening day. Communication will always be open and we will always have a resolution. Don't hesitate to reach out to me
Really appreciate these status updates and your professionalism pench.

Looking forward to new batch of TC.
 
Touch base with my man and we will fix it 100%. There will always be resolutions with me.

Men If there are more NPP crashing please let me know and I will adjust the BB content. I'll make note of this no matter.

Another Announcement
I've been receiving a lot of emails about opening day, In regards to when is the date going to be. My answer usually always falls back on when all the purity reports come back we can compound the materials correctly. From that point forward we can place a good date on it.

In my opinion, That is the proper way, is to wait for all the purity reports to come in before synthesizing the materials. Not to mention some materials are still in route, more TD, TRA, more Halo there not far but little bit of time is all.

I understand some materials can be detected using bloodwork. However, let us not forget our history. We ran into 2 incorrect reports that were blends and not what they were intended to be. In short summary you're shooting in the dark without the report. I understand, yes we have done that in the past but if we can avoid it in the future, we should try at best.

We are in que for receiving purity reports from Jano Team especially for TCA8 which is a solid amount. I will email him to see how we look. Filters come in tomorrow according to tracking.

Those few clients waiting on TC and TE on me, I have not forgotten. You will be made whole 100%.

I'll continue to make updates to the list. Ill do all the work I can in preparation of opening day. Communication will always be open and we will always have a resolution. Don't hesitate to reach out to me
Thanks Pench, jam up.
 
Touch base with my man and we will fix it 100%. There will always be resolutions with me.

Men If there are more NPP crashing please let me know and I will adjust the BB content. I'll make note of this no matter.

Another Announcement
I've been receiving a lot of emails about opening day, In regards to when is the date going to be. My answer usually always falls back on when all the purity reports come back we can compound the materials correctly. From that point forward we can place a good date on it.

In my opinion, That is the proper way, is to wait for all the purity reports to come in before synthesizing the materials. Not to mention some materials are still in route, more TD, TRA, more Halo there not far but little bit of time is all.

I understand some materials can be detected using bloodwork. However, let us not forget our history. We ran into 2 incorrect reports that were blends and not what they were intended to be. In short summary you're shooting in the dark without the report. I understand, yes we have done that in the past but if we can avoid it in the future, we should try at best.

We are in que for receiving purity reports from Jano Team especially for TCA8 which is a solid amount. I will email him to see how we look. Filters come in tomorrow according to tracking.

Those few clients waiting on TC and TE on me, I have not forgotten. You will be made whole 100%.

I'll continue to make updates to the list. Ill do all the work I can in preparation of opening day. Communication will always be open and we will always have a resolution. Don't hesitate to reach out to me
This is why we love and trust you the way we do Pench. I don't know of many other brewers who see stuff like crashing and address it up front with concern and attention to detail like this! You've set a standard with your operation and it's top tier in my opinion. I never fret over opening date(and neither should anyone reading!!), because I know you'll always be up front, transparent and honest about what is what and how much is available. Much respect and appreciation for all you do for us brother!
 
@heavydutygorilla thank you sir, always look forward to hearing your voice HD, it is a motivator to be honest. Another motivator, I would like to recognize him, the new vendor here serving the community . Maybe Small now but approaching recognition quickly. He is definitely putting in the hours of work. Its good to see other brewers putting in the work rather than buying oils and claiming its theirs. That is my point of the story. Can never hate on a man that is working when another man is taking a break. Respect


Good News Men, Jano Team touched base with me. So the machine is moving forward.

We also came to solid agreement and good standing, I am very content to say. @aasraws will be helping us with some materials. As I would any vendor providing to this community, they very much know my standards. In which all vendors dealing with me know. That providing to this community those vendors will be held accountable. With professional behavior and fairness to conclude with my latter statement.
 
Sample Announcement

I apologized to Jano Team for sending and then notifying in transit I was not fast enough so they allow it in. Wasn’t accepted feel like ripping my G damn arm and throwing it.

I emailed them and requested if I can resend everything I got. Men I am sorry for this error on my end. If they give me the green light il send Test Decaonate because other half already landed. I’ll send Halo and th other half of Ment. Only reason I had not sent ment 2 and halo was because more is in route and was wondering why was little longer than normal.

I’m sorry. I’ll send everything I got on hand and the plus anything that arrives today lie the TD once Jano gives me the green light. Lesson learned the hard way won’t be doing that anymore. Sob!
 
Sample Announcement

I apologized to Jano Team for sending and then notifying in transit I was not fast enough so they allow it in. Wasn’t accepted feel like ripping my G damn arm and throwing it.

I emailed them and requested if I can resend everything I got. Men I am sorry for this error on my end. If they give me the green light il send Test Decaonate because other half already landed. I’ll send Halo and th other half of Ment. Only reason I had not sent ment 2 and halo was because more is in route and was wondering why was little longer than normal.

I’m sorry. I’ll send everything I got on hand and the plus anything that arrives today lie the TD once Jano gives me the green light. Lesson learned the hard way won’t be doing that anymore. Sob!
Biggest pieces of this are two fold. 1st the communication. 2nd actual testing being sent and confirmed. It’s never here is your product we are sending for test and it never shows up for the consumer. This thread is never full of questions regarding testing and that is great. When a source isn’t testing everything what are they hiding? Always plain sight here. Thanks for the update brother.
 
Sample Announcement

I apologized to Jano Team for sending and then notifying in transit I was not fast enough so they allow it in. Wasn’t accepted feel like ripping my G damn arm and throwing it.

I emailed them and requested if I can resend everything I got. Men I am sorry for this error on my end. If they give me the green light il send Test Decaonate because other half already landed. I’ll send Halo and th other half of Ment. Only reason I had not sent ment 2 and halo was because more is in route and was wondering why was little longer than normal.

I’m sorry. I’ll send everything I got on hand and the plus anything that arrives today lie the TD once Jano gives me the green light. Lesson learned the hard way won’t be doing that anymore. Sob!
It’s worth the wait. Thank you for sticking to your principles and doing the right thing.
 

Sponsors

Back
Top