MESO-Rx Sponsor Primal Pharma - US Domestic

[ThatGuy500mg]

Did

A large part of this thread has nothing to do with this vendor.
A large part of this thread is of this vendor being accused of being another vendor.
And..a large part of this thread consists of repeated questions this vendor refused to answer about his testing results.

Page count doesn't mean anything, see how many pages QSC got when they got raided and were not even in business.

they ever post pictures of their lab setup like several others have?

 

[PrimoKerby]

Brothers,

For the safety of this community, I am posting a formal alert regarding a systemic and dangerous failure of quality control at Primal Pharma.

I have just published a comprehensive, detailed autopsy of a recent order. The key findings include:

• Contaminated Injectables: Their Testosterone and Masteron oils are dangerously contaminated, resulting in a severe medical emergency (graphic photos in link). The Masteron vials also arrived visibly crashed/precipitated, a hallmark of an amateurish brewing process.
• Fraudulent Orals: Their orals are bunk. The "Anavar" was demonstrably counterfeit, producing effects consistent with Dianabol substitution—a finding that corroborates the recent reports from several other users right here in this thread. The Clenbuterol was completely inert.
• Dishonorable Conduct: When presented with this irrefutable evidence, the company responded with insults and ultimately lied about providing a refund.

My analysis is conducted under my real name and is backed by my credentials as a Stanford-trained chemist and two-time International Chemistry Olympiad Gold Medalist.

This is not a simple "bad review." This is a documented public health crisis and a warning about a dangerous and fraudulent operator. I strongly urge everyone to read the full, evidence-backed report before you risk your health and your money.

You can read the complete analysis and see all the evidence here:

PUBLIC HEALTH & FRAUD ALERT PRIMAL PHARMA US DOMESTIC: A Stanford Chemist's Scientific Autopsy of Primal Pharma's Contaminated & Counterfeit Products

Stay safe.

Paul Haidu Gerea

This is my crp blood work from last month using his Test C 250 and Mast p 200 at a dosage of 350/350 kind of you had a terrible reaction only thing I can think of is you injected crystalized mast and didn’t even bother to heat it back up to disolve em like somone said it’s a high dosage for mast p it’s bound to crash lol

 

[PrimoKerby]

This is my crp blood work from last month using his Test C 250 and Mast p 200 at a dosage of 350/350 kind of you had a terrible reaction only thing I can think of is you injected crystalized mast and didn’t even bother to heat it back up to disolve em like somone said it’s a high dosage for mast p it’s bound to crash lol

 

[AlteredAttitude]

Who knows if that's even him. He probably looked up some chemist and thought it would but him credibility. That injection site is pretty gnarly though.

This was my thoughts exactly. Surely he cant be that stupid?! Or maybe..

 

[BigGulp]

I guess I'll make a general suggestion a "Stanford-trained gold-medal chemist" couldn't fathom...

Keep a Z-pak or two on hand in the off-chance you contract a site infection... Consider utilizing said Z-pak before necrosis sets in.

 

[Smokeythabear]

Interesting. Anybody else had pip from the text cyp 250?

I’m a pin cushion with the Test C 250. I haven’t had any PIP with the old green tops or the new black tops. 29g 1/2” insulin pins most of the time but I’ve loaded up the 3ml with a 25g before traveling and still no PIP.

 

[ThatGuy500mg]

I’m a pin cushion with the Test C 250. I haven’t had any PIP with the old green tops or the new black tops. 29g 1/2” insulin pins most of the time but I’ve loaded up the 3ml with a 25g before traveling and still no PIP.

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

 

[Dial It In]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

 

[monster8912]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

Draw with an 18g then pin with 25 or whatever you prefer

 

[TheMoto]

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

Draw with an 18g then pin with 25 or whatever you prefer

Amazon.com

 

[AlteredAttitude]

Amazon.com

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

 

[Dial It In]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

Screw those things

 

[TheMoto]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

never had an issue... they're used with alcohol in hospitals around the world daily. they're designed to be used with alcohol... Medical grade Plastics...

 

[TanFishMan]

Those have been known to melt from the alcohol in gear. Some people don't care. They sure are convenient though.

It’s the BB that causes issues. These are great for bac water/peptides/ l-carn

There is a thread on this board showing plastic going milky and cracking using multiple common use carrier combinations

 

[Photon]

never had an issue... they're used with alcohol in hospitals around the world daily. they're designed to be used with alcohol... Medical grade Plastics...

Yes but not the way we use them.
MCT BA BB EO?
How many pharmaceuticals even contain those products?
Hospitals also don't keep these spikes in for that long -- as compared to us.

Post in thread 'Multidose Vial Adapter'

Jul 15, 2025

I just went and check and this is what I am seeing:

100% BB is in rough shape but less than I would have thought. The whole inside of the "tubing" is completely corroded and the spike tip fell off. This is without me agetating it. It was just the weight of the tip that finally broke it off of the corroded piece. The tip is still clear. It makes me wonder what the difference is in the material between parts of these:




You can see the satilite dish looking piece has more corrosion on it and is starting to get "fuzzy" like it is disintegrating.




This might be...

• niqTM

• 
• 

Did

they ever post pictures of their lab setup like several others have?

Not that im aware of, in today's era its all AI generated anyways..

 

[yepyep12]

The black top stoppers feel a little tougher than what I’ve used in the past, which may dull the needle and that could be causing some irritation but I doubt it.

i've said this exact same thing. I just ended up backloading the syringe.

 

[ThatGuy500mg]

Don’t draw with the same needle you inject with and it solves that problem. With MCT or GSO and my oil a little warm I draw with a 21g.

What if you’re using an insulin syringe? I do warm it up before I pull it though. I have some of those smartsite vial access devices on the way to try out

 

[The Answ3r]

Did they ever post pictures of their lab setup like several others have?

I asked for lab photos and he casually dropped this in my email. Said it was “mid-shift.”

 

[Theschnozzberries]

Interesting. Anybody else had pip from the text cyp 250?

I just started his cyp 250. Have done two .5ml shots so far and gotten a good amount of pip

 

[Infernalmango]

I asked for lab photos and he casually dropped this in my email. Said it was “mid-shift.”

View attachment 371403

Food and drink in a gmp area?? I don’t fucking think so!