MESO-Rx Sponsor Primal Pharma - US Domestic

We’re still sending the 12 compounds. We had planned to ship the full set together once everything was back in stock, but we’ll get what we have out soon and follow with the rest as soon as they land. Please be patient with us. Turnaround is as fast as we can make it. Our testing reimbursement policy is there for exactly this, so you can help cover the verification side while we keep production moving. If anyone wants to send anything in ahead of us, go for it and we will take care of it per policy.

Yes, TRE400 stays on the menu.

No brewer comments right now. He is buried in production and I am not trying to get something thrown at me.

We keep the reimbursement policy juicy so the community can help on this side while we juggle a lot. Thanks for the patience, brother.
Violet Tops?
 
I seriously thought about that 500, but I chickend out due to pip. I've been burned by 400 too many times! I did stock up on the testC250.
I hear you. I’ll never shoot it straight, I always dilute it with other compounds.

Towards the summer when I start to cut, I half my test dose. That is when I get to use 250/300 per ml and it’s like heaven.
 
I think the last 5 pages means they're informed, brother lol. Also I wish you would be more clear - the Jano reports says 'suspected'. We still cannot say for a fact that's what it is. Appreciate the scrutiny. Let’s keep the thread factual and not turn “suspected” into “confirmed” until the data says so.

Let me rephrase my question then. Are you planning to inform customers that the vials are suspected to contain melted plastic based off a 3rd party lab test. As of now, you are the only vendor with this in your vials.

If nothing is going to be done, then there is no point testing any further. We can simply stick to HPLC mg/ml and forego any further improvements or testing.

Lab testing results are already performed, are you simply brushing them off as 'not confirmed', because I assure you, nobody is going to confirm this and put it in writing.
 
There are guys in here saying they want more discussion about training, gear, etc. I can tell you that virtually every post I have made about gear, dosing, bloodwork, etc has had very little interaction. Zero from the guys saying they want it. Interesting.
I think because in this thread specifically we've got seasoned vets and we've got dyels, not much in between.
Let's hear it though. What'd you pin today and what are you doing in the gym?
 
  • Like
Reactions: JJ3
Alright, let’s pause the never ending debate about cap colors, oil shades and what scent a vial should have. It’s starting to feel like the same song on repeat every five pages.

@Primal_Pharma, what do you have planned for the lineup in the near future? Maybe some ready blends like test p + mast p + tren a, or even long ester mixes like test e + mast e + tren e. A simple test + deca combo could also make life easier for guys who don’t want to juggle three vials at once.

Have you thought about bumping the number of caps, say 50 instead of 30, and adjusting prices a bit to match other vendors?

And have you ever considered adding a few pharma grade products so people can get everything in one place instead of running around to three different shops?
Thank you, brother.

1: We want to keep standard bottles at 30 caps. It lines up with monthly dosing, keeps batches fresher, and lets us hold a tighter line on quality and testing. That said, we will always do our best to fulfill custom orders. If you want 50 caps, tell me the compound, mg, and how many bottles you need and I will get you a quote and take care of it.

2: Absolutely, brother. We’re cooking up a Test P + Mast P + Tren Ace blend and aiming to have it live right around Halloween. This is exactly the kind of mix we love building because it came straight from the community. On the long-ester side, Test E + Mast E + Tren E is on the shortlist, and a simple Test + Deca combo is a no-brainer. Love that.

Help us dial these in. If the Meso crew piles on a specific formula or pin schedule, we’ll make that the priority. We want these blends to be the ones you actually reach for!

3: Yes! We have considered it and the goal is the same as yours, a true one stop shop.
 
Let me rephrase my question then. Are you planning to inform customers that the vials are suspected to contain melted plastic based off a 3rd party lab test. As of now, you are the only vendor with this in your vials.

If nothing is going to be done, then there is no point testing any further. We can simply stick to HPLC mg/ml and forego any further improvements or testing.

Lab testing results are already performed, are you simply brushing them off as 'not confirmed', because I assure you, nobody is going to confirm this and put it in writing.
Are you saying there is no way to 100% confirm this?
 
Let me rephrase my question then. Are you planning to inform customers that the vials are suspected to contain melted plastic based off a 3rd party lab test. As of now, you are the only vendor with this in your vials.

If nothing is going to be done, then there is no point testing any further. We can simply stick to HPLC mg/ml and forego any further improvements or testing.

Lab testing results are already performed, are you simply brushing them off as 'not confirmed', because I assure you, nobody is going to confirm this and put it in writing.
We’re also the only source that volunteered to expand testing and improve everything across the board, which is exactly why this “jump to conclusions” take doesn’t make sense. Nobody here said “not confirmed.” The Jano report itself says “suspected.” That’s their wording, not ours, and we won’t rewrite “suspected” into “confirmed” without a proper chain-of-custody confirmation. That isn’t brushing anything off, that’s how you do this the right way.

We’ve already pulled retainers and are moving sealed vials for confirmation work. That includes sealed-vial submissions with photos that match what the lab posts, plus follow-ups to identify any particulates and review extractables and leachables from components. If a confirmed finding impacts quality or safety, we will post it publicly and contact affected buyers with the remedy. Period.

Saying we’re “the only vendor with this in our vials” is premature. Right now there’s one third-party report using the word “suspected.” We’re treating it seriously and doing the extra steps precisely because we volunteered to do more than just mg/mL. If anyone in the community wants to run an independent sealed-vial test in parallel, our reimbursement policy stands, we’ll honor it once results are posted and matched to the vial photos.

We’re here to fix problems, not hide them. Let’s keep it factual until the confirmation work is complete. Stop scaring people my guy.
 
Are you saying there is no way to 100% confirm this?

I emailed Jano but I got a feeling our testing methods now are not sufficient.
To make it clear, out of the 14+ GCMS samples we have of other vendors, his product is the only one which matches what is detected when the plastic melts.
 
Are you saying there is no way to 100% confirm this?
Can't figure out where it came from when there's still no concensus on what it is. It could be anything from an intermediary component of refining BA/BB to an organic solvent used in the manufacturing of tren to a common molecule found in carrots and onions. It just happened to show up in the same window as jano's plastics screening.
 
Saying we’re “the only vendor with this in our vials” is premature. Right now there’s one third-party report using the word “suspected.”

Two.
However what you said it right, suspected, not confirmed, let me see what i can do with Jano to move from suspected->confirmed.

Only vendor suspected thus far.
 
And speaking of blends....

Personally, id like to see the tren/test/mast blend where the tren was a smaller dose.

The 100/100/100 blends are too much tren to be practical IMO
 
I think because in this thread specifically we've got seasoned vets and we've got dyels, not much in between.
Let's hear it though. What'd you pin today and what are you doing in the gym?
Gonna pin my test, EQ, and deca when I get home from work!! Then 4iu GH before bed!

It’s back day! My gym did a crackdown on cable attachment anarchy and tightened the shit outta the screw lock carabiners on everything but I threw a 13mm wrench in my gym bag so close grip pulldowns are back on the menu. Winners win!
 
And speaking of blends....

Personally, id like to see the tren/test/mast blend where the tren was a smaller dose.

The 100/100/100 blends are too much tren to be practical IMO
We were thinking a 100/100/25, 100/100/50.

Just gotta figure out if we can do this with just MCT.

If solvents are needed, would you guys be open to it? EO is something we would consider, but we are not sure about the guacamole...
 
Thank you, brother.

1: We want to keep standard bottles at 30 caps. It lines up with monthly dosing, keeps batches fresher, and lets us hold a tighter line on quality and testing. That said, we will always do our best to fulfill custom orders. If you want 50 caps, tell me the compound, mg, and how many bottles you need and I will get you a quote and take care of it.

2: Absolutely, brother. We’re cooking up a Test P + Mast P + Tren Ace blend and aiming to have it live right around Halloween. This is exactly the kind of mix we love building because it came straight from the community. On the long-ester side, Test E + Mast E + Tren E is on the shortlist, and a simple Test + Deca combo is a no-brainer. Love that.

Help us dial these in. If the Meso crew piles on a specific formula or pin schedule, we’ll make that the priority. We want these blends to be the ones you actually reach for!

3: Yes! We have considered it and the goal is the same as yours, a true one stop shop.
For the love of God, please PLEASE don't waste precious Mast E raws on a blend product!

No one can ever agree on concentration ratios because we all want/need something a little different with individual dosing. Mast E is so difficult to come by, I'd hate to see it used up in a niche product that's of limited practical use for many more advanced users.
 
Back
Top