QSC floaters in test e and tren e

[anonymous 524708]

The title should say tren a, not tren e. I can't edit the title to fix it.

I recently bought kits of test e and tren a, and have checked for floaters. Every vial has floaters. Most vials have very small floaters that looks almost like dust and can be difficult to see in some vials. A few vials have visibly larger floaters like in the attached photos and videos.

I checked the vials, saw floaters, and then decided to heat the vials before recording so there would not be any question about crashed gear. I heated the vials for 30 minutes at 170. They were still slightly warm when I handled them for the videos.

Here is the test e. The small red circle is drawn around the large floater. The large red circle is also drawn around the smaller floaters.


This is a vial of tren a. Circle around the large floater, but there are also small floaters which you can see in the video.


Video for test e
View attachment QSC test e with floaters video.mov

Video for tren a
View attachment QSC tren a with floaters video.mov

I will not be asking QSC to compensate me. I bought these vials knowing the difficulties with floaters that QSC has had in the past and always planned on refiltering them myself. I am not looking for free stuff.

Has anyone else carefully checked their new QSC vials for floaters? The very small ones can appear as almost a cloud of dust and be difficult to see unless you take your time. I prefer the rotation method in the video so that I don't generate air bubbles that can cause confusion.

 

[Sampei]

I recently bought kits of test e and tren e, and have checked for floaters. Every vial has floaters. Most vials have very small floaters that looks almost like dust and can be difficult to see in some vials. A few vials have visibly larger floaters like in the attached photos and videos.

I checked the vials, saw floaters, and then decided to heat the vials before recording so there would not be any question about crashed gear. I heated the vials for 30 minutes at 170. They were still slightly warm when I handled them for the videos.

Here is the test e. The small red circle is drawn around the large floater. The large red circle is also drawn around the smaller floaters.
View attachment 310182

This is a vial of tren a. Circle around the large floater, but there are also small floaters which you can see in the video.
View attachment 310187

Video for test e
View attachment 310197

Video for tren a
View attachment 310198

I will not be asking QSC to compensate me. I bought these vials knowing the difficulties with floaters that QSC has had in the past and always planned on refiltering them myself. I am not looking for free stuff.

Has anyone else carefully checked their new QSC vials for floaters? The very small ones can appear as almost a cloud of dust and be difficult to see unless you take your time. I prefer the rotation method in the video so that I don't generate air bubbles that can cause confusion.

Are these the new improved stopper caps bla bla batch or Is this one of the old batches?

 

[anonymous 524708]

Are these the new improved stopper caps bla bla batch or Is this one of the old batches?

These are the new vials.

 

[iris]

Let's hope that very helpful one from Opti who also liked a bit of Qsc so much, yesterday, comes and helps you out.

In the meantime:

Forum Etiquette Thread '⚡Welcome to the MESO-Rx Forum. New Members ⭐️PLEASE READ⭐️'

Feb 21, 2023

Welcome to the MESO-Rx Forum community! I want to take the opportunity to offer a brief overview of the MESO Forum.

The MESO-Rx Forum is comprised of 25 subforums. The subforums cover a wide variety of topics related to the world of anabolic steroids, performance, and performance-enhancing drugs with an emphasis on minimizing the associated harm and risk.

Each subforum has a different focus. For example:

The "Steroid Forum" subforum emphasizes the use of anabolic steroids to increase muscle size, strength and performance;

The "Human Growth Hormone and...

• MESO-Rx Administrator
• Replies: 443
• Forum: New Member Introduction

• 
• 

 

[anonymous 524708]

I forgot to tag @Millard please move to the underground. Thank you.

 

[narta]

Man you are cursed. First the leaking package and within a month floaters....

 

[anonymous 524708]

Let's hope that very helpful one from Opti who also liked a bit of Qsc so much, yesterday, comes and helps you out.

In the meantime:

Forum Etiquette Thread '⚡Welcome to the MESO-Rx Forum. New Members ⭐️PLEASE READ⭐️'

Feb 21, 2023

Welcome to the MESO-Rx Forum community! I want to take the opportunity to offer a brief overview of the MESO Forum.

The MESO-Rx Forum is comprised of 25 subforums. The subforums cover a wide variety of topics related to the world of anabolic steroids, performance, and performance-enhancing drugs with an emphasis on minimizing the associated harm and risk.

Each subforum has a different focus. For example:

The "Steroid Forum" subforum emphasizes the use of anabolic steroids to increase muscle size, strength and performance;

The "Human Growth Hormone and...

• MESO-Rx Administrator
• Replies: 443
• Forum: New Member Introduction

• 
• 

What does Opti have to do with this?

The new members instruction is for regular members not anonymous posts describing problems with a source.

 

[anonymous 524708]

Man you are cursed. First the leaking package and within a month floaters....

Yeah the leaking package from generic asia was a kick in the balls compared to anything else. The packaging from QSC for this order was good enough that I would not worry about a vial breaking.

I would really like to get some feedback from others on whether they see floaters in their test e and tren a from the new batches from QSC. I can't be the only one that has these floaters. They are hard to see though, so I could understand people not seeing them unless they are as anal as I am. Or maybe most vials were purchased by resellers and we would never hear of them for that reason?

 

[SwolieGuacamole]

These are the new vials.

This is confirmed? Are you in the states? I asked them 3x for a price list and couldn’t get one.

 

[bigMoJo]

I forgot to tag @Millard please move to the underground. Thank you.

You keep asking Admin to help move your "grievances" to the Underground...

A

Thread 'WARNING GenericAsia shipping box showing oil leak on the outside'

Nov 10, 2024

I’m posting this from an anonymous account.

@Millard please move to the Underground and perhaps provide a link within the GenericAsia source thread or whatever you consider to be the best course of action. Thank you.



I received an order from GenericAsia in October which contained vials of oil. Unfortunately the packaging of the vials was very substandard. They were packaged in single bubble mailer bags with no way to contain leaks. One of the vials broke and leaked out of the bubble bag and caused a clearly visible oil stain on the outside of the shipping box. This...

• anonymous 524708
• Replies: 4
• Forum: Steroid Underground

• 
• 

Yet, you haven't posted a "New Member Intro" or at least paid the measly $10 to gain post privileges in the Underground. Now, you want others help for "feedback."

Why? Because you want to help the community or just plain self-interest?

 

[B Ware]

QSC should be required to always do the enhanced testing since their gear always has reports of it being filthy.

I’ve seen many sources over the years have some vials that go out with floaters and they immediately fix the issue and handle it well. Not QSC though.

 

[craigdt]

Really want to try QSC for test, but floaters scare me off.

Don't have any experience with filtering, not sure if savings are worth the hassle/risk....

 

[blastncruiser]

Complete negligence and reflects on their sanitation environment.

After you put a label on a vial you would think they would have spotted it. I don't even know how that stuff ends up in a vial? Shows their sterilization process that they wrote is a lie as this would have never happened.

I would request a refund and find another source .


Injecting their gear is going to make you the next Dan bodybuilderinthailand when his leg became infected


I may sound harsh but sources that put out products like this put people at risk for getting infections which further adds fuel to the fire for the media and general public to demonize steroids and put us members at risk

 

[SwolieGuacamole]

Still waiting for confirmation if this is actually from their “premium” line

I don’t see how the timeline would work if it’s the new batches.

 

[MyNameIsJeff]

Complete negligence and reflects on their sanitation environment.

After you put a label on a vial you would think they would have spotted it. I don't even know how that stuff ends up in a vial? Shows their sterilization process that they wrote is a lie as this would have never happened.

I would request a refund and find another source .


Injecting their gear is going to make you the next Dan bodybuilderinthailand when his leg became infected


I may sound harsh but sources that put out products like this put people at risk for getting infections which further adds fuel to the fire for the media and general public to demonize steroids and put us members at risk

You are a low IQ drama queen and conflate floaters with sterility. The liquid can have filter fibers or rubber particles in them while still being sterile and free from endotoxins.

Oils from any source should be filtered, since you should be more concerned about non-visible particulates (the ones that actually will get sucked in through a needle).

 

[Sampei]

Still waiting for confirmation if this is actually from their “premium” line

I don’t see how the timeline would work if it’s the new batches.

I doubt as well that it's the new premium line but hard to say until we get more info.

@Qingdao Sigma Chemicals

 

[readalot]

QSC should be required to always do the enhanced testing since their gear always has reports of it being filthy.

I’ve seen many sources over the years have some vials that go out with floaters and they immediately fix the issue and handle it well. Not QSC though.

Unfortunately there is no test to add to the "enhanced" suite to address visible particulates. It is finished oils 101. The most basic of basics. This is simply negligence to let vials be shipped to customers with visible particulates floating around. I'll reserve further comments until QSC comments here.

I do agree with your idea. Since QSC has such a recurring issue make them be the leader in regular testing and surveillance. They should be testing each batch of raws with GCMS as well as HPLC plus suite of testing on finished oils.

 

[readalot]

The title should say tren a, not tren e. I can't edit the title to fix it.

I recently bought kits of test e and tren a, and have checked for floaters. Every vial has floaters. Most vials have very small floaters that looks almost like dust and can be difficult to see in some vials. A few vials have visibly larger floaters like in the attached photos and videos.

I checked the vials, saw floaters, and then decided to heat the vials before recording so there would not be any question about crashed gear. I heated the vials for 30 minutes at 170. They were still slightly warm when I handled them for the videos.

Here is the test e. The small red circle is drawn around the large floater. The large red circle is also drawn around the smaller floaters.
View attachment 310182

This is a vial of tren a. Circle around the large floater, but there are also small floaters which you can see in the video.
View attachment 310187

Video for test e
View attachment 310197

Video for tren a
View attachment 310198

I will not be asking QSC to compensate me. I bought these vials knowing the difficulties with floaters that QSC has had in the past and always planned on refiltering them myself. I am not looking for free stuff.

Has anyone else carefully checked their new QSC vials for floaters? The very small ones can appear as almost a cloud of dust and be difficult to see unless you take your time. I prefer the rotation method in the video so that I don't generate air bubbles that can cause confusion.

Wow thank you for taking the time to share these pics and video. How in the F does anyone inject that stuff? Nasty!

 

[readalot]

Prior comments from QSC:

Oils has been always filtered with 0.22u

Particles were mainly from 2 origins: stoppers and filter fibers.
Once the stoppers changed, we already got rid of 99% of them.
The filter pump strong vaccum is the reason for the fibers and these ones are controller by visual inspection.

Each vial is inspected twice.

We also invested in a machine that scans vials, not sure how effective is it, can’t make a feedback on it yet

My questions here have not been answered yet:

Could you please provide update on when floater free / better stopper finished oils will be only stock being shipped out?

I'd like to have basis for tracking QC issues moving forward given the process improvements you have noted.

 

[TurboJet]

Jesus that looks some bathroom Bob shit.

I know everyone likes cheap shit but this isn't Walmart and you are injecting this into your body to improve it not fuck it up.

Do you want to be posting swole pics from the gym or pics from a hospital bed with a massive hole in your body?

Anyway if you're going to buy cheap shit do your due diligence and get it tested and filter it BEFORE injecting it into your body.

Good luck and thanks for sharing your experience with QSC quality...