Photon
Member
Jano's testing has margin of error by itself.
3 vial variance of another vendor -- 3rd party tested.
MESO-Rx
Anabolic Steroids
sp5der - QUALITY US DOMESTIC
- Thread starter sp5der
- Start date
Jano's testing has margin of error by itself.
3 vial variance of another vendor -- 3rd party tested.
All vials from same batch? How do we know?
Jano has posted RSDs for instrument precision on HPLC (same material injected multiple times) with very low RSD, less than 1% IIRC.
This is all great fun.
Search "RSD" by janoshik.
crispybacon!
Member
They are claimed to be from the same batch. However, the testing was done because of discrepancies around the vendors claims about batches. These samples were supposed to be from a batch that the vendors test results showed a higher concentration. So it is very possible that all three samples did not come from the same batch.
This is RSD example for instrument precision...
We do multiplicates and I have RSD for this particular sample...
Other part of puzzle is method precision. Haven't seen the raw data presented but under 2% would be excellent (same analyst prepping 10 samples and injecting).
I prefer to stay on the safe side with my claims.
We do multiplicates and I have RSD for this particular sample...
Other part of puzzle is method precision. Haven't seen the raw data presented but under 2% would be excellent (same analyst prepping 10 samples and injecting).
sp5der
Subscriber
Stock is low on this, around 150 vials. So if you want it I’d order it sooner than later. Also about 50 left of the MCT batch.
Orders will open 1st January for this. Be sure to specify if you want mig812 or MCT when ordering. Only needed for this batch, until MCT is gone. After MCT gone , all items sold will be mig812
On 1st January we will send finished Test C 250 and Test C 20 to Janoshik, as well as TNE raw. And orders for those will open up whenever results are back. Not selling batch 2 tc250 until batch 3 tc250 results get back. I would like to but, we don’t have enough stock for demand, and would have to close orders a day later.
That is the plan. Only thing that would stop it is test c raw bad test result. Though, I am hopeful it’s going to be good
Are 3rd party Janos for your stuff coming in soon? I didn't send mine because didn't want to break the bank for you. Probably will on next order.
sp5der
Subscriber
Cost don’t bother me bro send whatever
I think they’re coming in but that’s up to the people that sent when they get back results and decide to post them. Last I heard from customer that said he would test his package got stuck in customs
sp5der
Subscriber
We sold 10 tren in MCT so if u wanna order and don’t mine 2 week wait before shipment u can
We can take some test orders too but same ship timeline maybe a few days behind. Not everything filtered into vials yet
Tne won’t take orders
Tc20 won’t take orders
We can take some test orders too but same ship timeline maybe a few days behind. Not everything filtered into vials yet
Tne won’t take orders
Tc20 won’t take orders
Last edited:
funsizedtrouble1234
New Member
sp5der
Subscriber
Thank u for ur ordersI don’t know about you guys but I do love when an order arrives and even better when it’s under 5 days
The spider is the chefs kiss too! Happy holidays indeed.
I think you are just complicating your life with volumetric flask, when an analyticical. Balance scale can measure everything to the T.
Just convert ml to gr and enjoy perfect accuracy without going crazy with volumetric flask.
Plus a lot less expensive one balance vs multiple flask.
mig812 multiply by 0.95
BB 1.12
Castor 0.955
BA I use syringes but finding the number is easy
Just convert ml to gr and enjoy perfect accuracy without going crazy with volumetric flask.
Plus a lot less expensive one balance vs multiple flask.
mig812 multiply by 0.95
BB 1.12
Castor 0.955
BA I use syringes but finding the number is easy
sp5der
Subscriber
I’m sorry for the confusion. I said not taking orders then I said I’m taking orders.
Just keep get orders coming in ever day, despite saying closed, then they asking for pre orders when I say closed.
If you don’t mind the ~2 week wait u can pre order.
I rather take them and note them down now if they’re coming in so when I’m back shipping I can just pack and ship. Because I’m going to be busy making the new batches too at the same time.
Thank you.
Just keep get orders coming in ever day, despite saying closed, then they asking for pre orders when I say closed.
If you don’t mind the ~2 week wait u can pre order.
I rather take them and note them down now if they’re coming in so when I’m back shipping I can just pack and ship. Because I’m going to be busy making the new batches too at the same time.
Thank you.
sp5der
Subscriber
If volumetric flask HPLC isn’t near perfect, I’ll try this next. I appreciate the suggestion. Already spent close to $3k on flasks so I’m going to use them
Yeah if you have it already use it of course but you could have spent around 1k max (even less) on a good scale and achieve the same and in my opinion is a lot easier to watch a scale display than a volumetric flask.
Glad to see you doing well
sp5der
Subscriber
Thank you. I appreciate it.Yeah if you have it already use it of course but you could have spent around 1k max (even less) on a good scale and achieve the same and in my opinion is a lot easier to watch a scale display than a volumetric flask.
Glad to see you doing well
So you use recipe with displacement calcs?Yeah if you have it already use it of course but you could have spent around 1k max (even less) on a good scale and achieve the same and in my opinion is a lot easier to watch a scale display than a volumetric flask.
Glad to see you doing well
To achieve even close to similar accuracy with displacement method as vol flask method means all your inputs have to be highly accurate and those densities themselves are accurately measured using a volumetric flask.
In the end you have to have a very accurate way to measure volume one way or another since your API concentration is mg/ml. It is either baked in up front on your displacement values or measured on the back end for total solution volume.
With volumetric flask method you have two error sources...
(1) mass of API
(2) volume of batch
Any other method would have more than two error sources. That's important when considering propagation of error.
The volumetric flask method meant to simplify his life, not complicate it. Hence the additional $$$. Would be asinine to spend more money for less accurate/precise equipment/process.
Most accurate and precise method by far. It is how standardized reference solutions are made for molarity with extremely high accuracy (e.g., less that 0.1% error at 1 L volume).
Last edited:
BALLISTIC
Member
Thanks for clarifying. I will still wait as the lady T and TNE are priority for me and not avail currently.
For simplicity maybe articulate in the pastebin a closed until date? Asterisk at the top cause people are blind or can't read well. Haha
If you're taking full orders I'll go ahead and cover you in full. I have high expectations you'll be sitting great upon test results. I don't mind waiting. Patience is an uncommon virtue.
sp5der
Subscriber
Last thing to clarify
I agreed to replace original drop orders at $25/vial. I will still do that, for the original amount you ordered, no matter the amount. If your original order was 1 vial, you can have 1 at $25 and the second at $35. If that was 50 vials, you can have 50 vials at $25 and the 51st at $35. That’s fair. That’s what I did for past customers, same will be done for all.
Open for pre orders of tren a 100 in MCT and MIG812. Whichever you specify. Open for preorders of test c 250 in mig812.
~2 week shipping time. Orders start shipping 1st January
I agreed to replace original drop orders at $25/vial. I will still do that, for the original amount you ordered, no matter the amount. If your original order was 1 vial, you can have 1 at $25 and the second at $35. If that was 50 vials, you can have 50 vials at $25 and the 51st at $35. That’s fair. That’s what I did for past customers, same will be done for all.
Open for pre orders of tren a 100 in MCT and MIG812. Whichever you specify. Open for preorders of test c 250 in mig812.
~2 week shipping time. Orders start shipping 1st January
sp5der
Subscriber
I don’t have my pastebin password on this persistent storage or I would update it. I can’t login to pastebin right now. Only have my meso and my email.
Whistles77
Member
Brother. Thanks very much for your speedy comms over email. Really appreciate this clarification and excited to try the Mig812 when the time comes.
Similar threads
