nophat
Subscriber
I have never seen cloudy gear OK
That's some amateur shit right
Their!!
That's some amateur shit right
Their!!
MESO-Rx
Anabolic Steroids
Tren Gone Cloudy 1h After Filtering
- Thread starter mic
- Start date
nophat
Subscriber
Pin it and let us no how you explained to the doc what you did!
fightingfires
New Member
Very good chance there may be some moisture. I screwed up with a washed vial that I did not bake first. I normally bake the glassware to make sure it is perfectly dry and sterile, but forgot on one vial....it went cloudy
nophat
Subscriber
To be honest the cloudy sounds like either impurities or the oil. I have made it with GSO and it was cloudy, I ran it through the filtration again and it cleared up, several days later it started to cloud up again, that tells me its degradation in the light carrier oils and I rarely use more than 3% total BB/BA with my tren if under 20mls.
Pure tren is a great substance to work with and easy. I did a search of the cloudy and it appears that hexamine used in the process could be reacting with the BB and breaking down the chemical component. This is no big deal since the amounts are minimal. It will form a cloudy precipitation that will not affect the tren itself but could cause site irritation and scar tissue development where injections occur.
I will ask my friend who is currently doing the manufacturing process and see what he says. I will post his reply here
Not my info;From a post i came across.
Pure tren is a great substance to work with and easy. I did a search of the cloudy and it appears that hexamine used in the process could be reacting with the BB and breaking down the chemical component. This is no big deal since the amounts are minimal. It will form a cloudy precipitation that will not affect the tren itself but could cause site irritation and scar tissue development where injections occur.
I will ask my friend who is currently doing the manufacturing process and see what he says. I will post his reply here
Not my info;From a post i came across.
Any news on this bro?
Canadian Muscle333
New Member
Bro are you sure you used 2% ba and 20% bb?
Reason is because it should hold in 2%ba and 20%bb
if you add more ba or bb to it and heat it in over, I know for a mater of fact it will become clear again,
Reason is because it should hold in 2%ba and 20%bb
if you add more ba or bb to it and heat it in over, I know for a mater of fact it will become clear again,
Canadian Muscle333
New Member
I dont think its purity or filtering issue, same thing happened to me at 1.5% ba 15% bb
I added some more ba and bb, heated it and it was fine after
Than again your powders may not be pure, My tren usually is much darker at 100mg/ml
and YES darker is a GOOD sign of potency. The longer you cook it the darker it will get, but even not "well done" it should still be bronze gold, almost orange
I added some more ba and bb, heated it and it was fine after
Than again your powders may not be pure, My tren usually is much darker at 100mg/ml
and YES darker is a GOOD sign of potency. The longer you cook it the darker it will get, but even not "well done" it should still be bronze gold, almost orange
apmakeio
New Member
Cloudy trenbolone acetate is an effect of improper manufacturing prices. Its caused because during the manufacturing process the engineer didn't do certain steps under vacuum or controlled temperature. Its not a proper product but it can used without problems.
Dark trenbolone is not a good sign of potency. The dark color is related to oxidized particles. A high purity trenbolone ( >99% ) is much lighter in color than a lets say <95% like most powders from China are coming (at least the low cost ones). However, I prefer having a darker color trenbolone since this is a sign the chance of having real trenbolone is higher than lets say having a clear solution that might be testosterone propionate.
Dark trenbolone is not a good sign of potency. The dark color is related to oxidized particles. A high purity trenbolone ( >99% ) is much lighter in color than a lets say <95% like most powders from China are coming (at least the low cost ones). However, I prefer having a darker color trenbolone since this is a sign the chance of having real trenbolone is higher than lets say having a clear solution that might be testosterone propionate.
nophat
Subscriber
Did you use a brand new sterile veal?
if not it could be some kind of resadue
in the bottle.
if not it could be some kind of resadue
in the bottle.
apmakeio
New Member
Its of notoriety that trenbolone acetate coming out of China in the last 4-5 years is extremely cloudy once dissolved. Has nothing to do with the carrier oil, its the impurities technologically related.
Tj
X for the info bro. I got some thar was cloudy but it is super good
shredded
New Member
Glad to see someone is on the ball, this is 100% correct on the cloudy issue and also the colour, mind you some of the best tren I've seen was very light in colour so dark is not always a good indicator.
Here is the solution if the cloudiness worries you. First make your tren a as per usual then let it sit after filtering with a .22.
After a week or two you will find there is sediment on the bottom, withdraw all the clear tren from the top with a syringe and re filter into a sterile vial and your tren will not go cloudy again.
For the first filtering I would filter back into a clean beaker and cover with foil until the sediment settles out, then once your happy with the clarity refilter from the beaker into the final vials and then your done.
apmakeio
New Member
You might lose concentration this way as particles that settle on the bottom are binding with trenbolone as well. You might just give it a shake and inject it as it is (cloudy) or try getting a clear solution from first time.
shredded
New Member
Its almost impossible to get it clear on the first or even second pass of filtering, the stuff that settles is mostly a off white very fine powder that seems to have no effect on the potency of the tren, you can use it cloudy and it will present no problems. I have also seen this compound still there after reaching way past the melting point of the hormone at 97c this tells me its something other than tren still in the raw product.
It may not likely bind with the tren as if your brew is correct all of the hormone should be in suspension and should stay that way. Mind you if the raws are of better quality then there should be no issue.
It may not likely bind with the tren as if your brew is correct all of the hormone should be in suspension and should stay that way. Mind you if the raws are of better quality then there should be no issue.
nophat
Subscriber
What was the originel container
Or vial was it sealed sterile
Or was it a restarilized one?
Or vial was it sealed sterile
Or was it a restarilized one?
way back when i was doing some of this, main 2 reasons the tren comes out cloudy is not filtering your final product correctly or too much heat...And since im here may as well ask if anyone has bypassed that estradol BS or is there another way???
nophat
Subscriber
Na
Would save it for down the road someone cool come up with answer
Would save it for down the road someone cool come up with answer
SheriLee
New Member
Just brewed a batch made from tren pellets following the directions. The bottom has crystals, that when shook, it clouds the mixture. Could have been caused by too much heat, so it cystalized. I just tried injecting .5, as is, to see what happens. I can always let it all settle, withdraw the clear, and put into another bottle to use.
Similar threads
