Going to start brewing soon...Help me.

[Digger]

I'm using sterile sealed vials tho. Do i still need that?

No. Besides, that bag would probably be a pita to work inside of. Better would be a glovebox made from a large clear sterlite tub. But again, not reallly necessary for sterile sealed vials

 

[LooneyTuned]

No. Besides, that bag would probably be a pita to work inside of. Better would be a glovebox made from a large clear sterlite tub. But again, not reallly necessary for sterile sealed vials

cool thanks

 

[LooneyTuned]

I have 21g needles that are luer lock. Will this be ok to use to filter out the gear? Also my syringe filters have a luer lock side and a slip side. I'm going to use the luer side on for the syringe and put the needle on the slip side of the filter. Will the luer lock work on the slip side of the filter or should I get 18g luer slip needles?

 

[Digger]

I have 21g needles that are luer lock. Will this be ok to use to filter out the gear? Also my syringe filters have a luer lock side and a slip side. I'm going to use the luer side on for the syringe and put the needle on the slip side of the filter. Will the luer lock work on the slip side of the filter or should I get 18g luer slip needles?

Yup it'll work just fine my friend. 21g is great, I typically draw my shots with that and it's fairly gentle on the stopper. I use 25g on the filter sometimes, no issues. Make sure you use a separate needle to vent the vial while u inject the gear through the filter. 25g is good or any smaller guage. Place it in the vial at an angle. Only a tiny bit of the vent needle needs to be in the vial. Try to keep it from touching the finished gear.

Best of luck bud

 

[LooneyTuned]

Yup it'll work just fine my friend. 21g is great, I typically draw my shots with that and it's fairly gentle on the stopper. I use 25g on the filter sometimes, no issues. Make sure you use a separate needle to vent the vial while u inject the gear through the filter. 25g is good or any smaller guage. Place it in the vial at an angle. Only a tiny bit of the vent needle needs to be in the vial. Try to keep it from touching the finished gear.

Best of luck bud

Thanks alot

 

[Digger]

No problem. Once you do it, you'll kick yourself for not starting sooner.

 

[LooneyTuned]

No problem. Once you do it, you'll kick yourself for not starting sooner.

Yea I'm excited to do it. Should have the rest of my supplies this week. Just hope I dont fuck it up.

 

[Digger]

Yea I'm excited to do it. Should have the rest of my supplies this week. Just hope I dont fuck it up.

You won't. Just go slow and be deliberate. Not much different than cooking dinner. Be careful not to heat it up too much

 

[LooneyTuned]

You won't. Just go slow and be deliberate. Not much different than cooking dinner. Be careful not to heat it up too much

I was gonna try without heat first. Ill be on here askin some more question right b4 i start to make sure im doin everythng right lol.

 

[LooneyTuned]

Got all my supplies so I'm ready to go! I'm gonna try to brew 100mg/50ml of NPP. Anybody have a good recipe?

 

[LooneyTuned]

Filtered 50ml last night. Wow that was a pain in the ass. It took me like 2 hours to filter even with the oil warmed up. The oil was dripping by the drop. I used a 21g needle and i tried a 10ml syringe and a 3ml syringe to see if it would be faster but not really. My hands are sore as fuck tooda from all the pushing. Did i do something wrong?

 

[Iron Vett]

Filtered 50ml last night. Wow that was a pain in the ass. It took me like 2 hours to filter even with the oil warmed up. The oil was dripping by the drop. I used a 21g needle and i tried a 10ml syringe and a 3ml syringe to see if it would be faster but not really. My hands are sore as fuck tooda from all the pushing. Did i do something wrong?

You need to use a caulking gun to push your syringe plunger. A sixty ml syringe can hold about 40ml and still fit
In the caulking gun