ANAVAR 5gr. RAWS Oral Suspension Humco 40mg/pr. Ml???

[Scottyhash74]

Hey guys,

Got a quick question to ask regarding Anavar Raws.
By using Basskiller.com Steroid Calculator can I just plug in the variables or mgs wanted???
Say for instance
5gr. Anavar
50ml ORA PLUS
100mgs per ml?
Or 100ml Ora Plus
5gr. Anavar
50mgs. per ml?
Thanks in advance for any and all feedback.

 

[Iron Vett]

Hey guys,

Got a quick question to ask regarding Anavar Raws.
By using Basskiller.com Steroid Calculator can I just plug in the variables or mgs wanted???
Say for instance
5gr. Anavar
50ml ORA PLUS
100mgs per ml?
Or 100ml Ora Plus
5gr. Anavar
50mgs. per ml?
Thanks in advance for any and all feedback.

Both of your calculations you posted are correct

 

[Nickyyysixxx]

Hey guys,

Got a quick question to ask regarding Anavar Raws.
By using Basskiller.com Steroid Calculator can I just plug in the variables or mgs wanted???
Say for instance
5gr. Anavar
50ml ORA PLUS
100mgs per ml?
Or 100ml Ora Plus
5gr. Anavar
50mgs. per ml?
Thanks in advance for any and all feedback.

It won't suspend at that concentration. I just mixed up a batch of var at 50mg per ml with 100ml and it wouldn't hold, there was sediment at the bottom. Had to add another 100ml then it was good. Of course it dropped it down to 25mg per ml.

 

[TX_Hempknight]

Out of curiousity, do yall heat your oraplus while mixing?

 

[Nickyyysixxx]

I've done it both ways and did not notice a differencence

 

[Iron Vett]

It won't suspend at that concentration. I just mixed up a batch of var at 50mg per ml with 100ml and it wouldn't hold, there was sediment at the bottom. Had to add another 100ml then it was good. Of course it dropped it down to 25mg per ml.

It had settling at the bottom even after being freshly shaken?

 

[Nickyyysixxx]

It had settling at the bottom even after being freshly shaken?

Yes

 

[Scottyhash74]

Thx for your responses.
Unfortunately I already mixed 5 grams of Anavar w 60ml of Humco.
As i shake the piss out of it I too am noticing that I have sediment@ the bottom.
Since I already used the very last of my Humco is their anything else I can dp to save my Anavar?
Could I add some MCT oil to help me out?
Plz any and all help is extremely valued.
Thx again

 

[Nickyyysixxx]

I don't think adding oil will help. You need to add more suspension vehicle.

 

[Iron Vett]

If I’m understanding correctly it’s sounding like your powder has settled/clumped on the bottom and is now stuck. I personally don’t do suspensions but don’t people usually add ethanol to help keep powders from clumping?

 

[SmallWoody]

Maybe add some high proof grain alcohol. I used to use this recipe. But ended up switching to capsules

ANAVAR
1g of Oxandrolone powder
20mg/ml.
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol

This was the highest concentration I had that worked. And for that reason I switched to 50mg capsules. It's like rocket fuel

 

[Nickyyysixxx]

If I’m understanding correctly it’s sounding like your powder has settled/clumped on the bottom and is now stuck. I personally don’t do suspensions but don’t people usually add ethanol to help keep powders from clumping?

You don't have to use ethanol it depends on what your trying to do. You can use PG, everclear or a suspension vehicle. Only thing is with stuff like Ora plus there is a concentration threshold ever the raw will fall out of suspension. It has to be diluted more. Their website has a reference.

 

[Iron Vett]

You don't have to use ethanol it depends on what your trying to do. You can use PG, everclear or a suspension vehicle. Only thing is with stuff like Ora plus there is a concentration threshold ever the raw will fall out of suspension. It has to be diluted more. Their website has a reference.

Thanks for the reply. I went straight to capsules for the convenience and never messed with suspensions. Maybe one day I’ll try suspension if the situation arises where it will be better than capsules.

 

[Nickyyysixxx]

Thanks for the reply. I went straight to capsules for the convenience and never messed with suspensions. Maybe one day I’ll try suspension if the situation arises where it will be better than capsules.

It's just easier imo I've done both. Capping gets old if you're going it correctly. Weighing the filled caps with filler, weighing the caps with the active compound, doing the math then properly mixing in a pestle is tiresome. It's critical it's done right with stuff like adex or pramipexole because we are talking about fractions of a millagram. Suspension takes out the guess work and gives much more accurate measurements on a small scale.

 

[Iron Vett]

It's just easier imo I've done both. Capping gets old if you're going it correctly. Weighing the filled caps with filler, weighing the caps with the active compound, doing the math then properly mixing in a pestle is tiresome. It's critical it's done right with stuff like adex or pramipexole because we are talking about fractions of a millagram. Suspension takes out the guess work and gives much more accurate measurements on a small scale.

I sift my compounds and filler through a sieve first. For the higher dosed caps, I’ve made recipes that I’ve adjusted for accuracy in batches of 100 caps. After weighing out the compounds and filler, I run them in the tumbler while loading cap halves in the capsule machine. My capsule machine loads by rolling the cap halves around and then they fall into the holes. Then I pack the mix into the caps. It’s really not that difficult when done this way.

Wet granulation has to be used for the lower dosed compounds to be capped accurately. I’ve seen .5mg arimadex caps consistently test accurately using this method.

 

[Nickyyysixxx]

I sift my compounds and filler through a sieve first. For the higher dosed caps, I’ve made recipes that I’ve adjusted for accuracy in batches of 100 caps. After weighing out the compounds and filler, I run them in the tumbler while loading cap halves in the capsule machine. My capsule machine loads by rolling the cap halves around and then they fall into the holes. Then I pack the mix into the caps. It’s really not that difficult when done this way.

Wet granulation has to be used for the lower dosed compounds to be capped accurately. I’ve seen .5mg arimadex caps consistently test accurately using this method.

Sounds like you know what your doing as far as capping compounds go. I've never heard of wet granulation before I'm going to have to do some research on that. My only hang up on capping is the time it takes. Ora-plus takes me about 5 minutes maybe less to mix up with my compound or compounds. I do enjoy having caps because transporting liquids can be tricky and you don't have to measure your dose with a syringe.

 

[Iron Vett]

Sounds like you know what your doing as far as capping compounds go. I've never heard of wet granulation before I'm going to have to do some research on that. My only hang up on capping is the time it takes. Ora-plus takes me about 5 minutes maybe less to mix up with my compound or compounds. I do enjoy having caps because transporting liquids can be tricky and you don't have to measure your dose with a syringe.

If you ever decide to change over to caps and need some help, go ahead and hit me up and I’ll try to help you out

 

[jJjburton]

Thanks for the reply. I went straight to capsules for the convenience and never messed with suspensions. Maybe one day I’ll try suspension if the situation arises where it will be better than capsules.

How many milligrams can you fit in one 0 size capsule?

 

[Iron Vett]

How many milligrams can you fit in one 0 size capsule?

A lot. If your filler is Baking Soda, a size 0 cap can hold 850 milligrams of just it