Saiyan Labs (US Domestic)

The next nude should be:

  • Front pic with her face and pussy

    Votes: 26 38.2%
  • Back pic with her bare ass bent over

    Votes: 36 52.9%
  • Fron pic of her boobs and face, holding a sign with a random posters handle

    Votes: 6 8.8%

  • Total voters
    68
  • Poll closed .
You may have missed some of my replies, I've been constantly refreshing since you guys are quick to respond. I made injectable winny for myself just to try it, it bit hard, and that is why I did not list it for sale. I'm not going to sell anything that I have not pinned myself. I mentioned this when someone asked me about the Test P PIP. Basically I was saying the Test P pip was not too bad for me because compared to the Winny it was nothing.



I keep my personal stash far far away from items to be sold. For me personally my main cycle right now is test e/tren a. The test is light colored, nothing fancy, but gets the job done. Plain jane. My Tren A I'd know at first sight, honey colored like Ambrosia. I'm completely Trensexual, no homo though.
Please don’t rely on color of the finished product. Still waiting on you labeling process ?
 
If I’m reading correctly so say you have 4 grams of active you toss in 4grams of BS then add 8 grams then 16grams and so fourth. Is that what you were getting at?

I wanted to get a quick reply out to you. Let me go into more detail so there is no confusion, might take me a second to write this out. It depends on my compound what ratio I will use. I've seen you on other threads so I should have taken the time to write an in-depth reply to you, but I was trying to reply to everyone and not miss new posts.

Let's just say I'm mixing up some Anavar to cap. I'll get my Var and I'll get my baking soda. First I'll decide my ratios. Lets say I'm doing 5mg of var for every 50mg of baking soda. So my ratio here is 5mg of var for every 50mg of baking soda. If I'm doing say, 100mg of var I will need 1000mg of baking soda.

I put all the var in my mortar and pestle. I'll add a roughly equal volume of baking soda. I mix that shit the fuck up. I'll add in more baking soda equal to the volume of the total mix. I'll stir it the fuck up. Repeat this process.
 
Last edited:
I wanted to get a quick reply out to you. Let me go into more detail so there is no confusion, might take me a second to write this out. It depends on my compound what ratio I will use. I've seen you on other threads so I should have taken the time to write an in-depth reply to you, but I was trying to reply to everyone and not miss new posts.

Let's just say I'm mixing up some Anavar to cap. I'll get my Var abd I'll get my baking soda. First I'll decide my ratios. Lets say I'm doing 5mg of var for every 50mg of baking soda. So my ratio here is 5mg of var for every 50mg of baking soda. If I'm doing say, 100mg of var I will need 1000mg of baking soda.

I put all the var in my mortar and pestle. I'll add a roughly equal volume of baking soda. I mix that shit the fuck up. I'll add in more creatine equal to the volume of the total mix. I'll stir it the fuck up. Repeat this process.

You wanna proofread shit before you post? you went from baking soda to creatine.

Also why are you using examples of this stuff "say we have..." do you not have the recipe of anavar to actually post, it's not a secret that a 25mg var cap will have 25mg of var and the rest your filler.
 
Also how many people are in your operation and what do you do after some mutha fucca sends you a email? What if I ordered 200 bottles of test from you, do u save my info for a bargaining chip for when you get busted? What do you do for our security

I keep a vial of cyanide on me at all times for situations like this. Just kidding, maybe. This is a solo operation, I enjoy my freedom just as much as you do. The only person who's work ethic and integrity I know 100% is my own, so I'm the only person on my "team". I run tuta/proton off a disposable phone under a phone plan thats main company is based overseas and not exactly helpful with the US government. During an order I will confirm your shipping details. Upon shipping your product I will give the tracking, confirm I sent it, then delete the email. Should this become too much for me in the future to keep up with individual emails I will simply nuke the inbox once a week. I keep no written records, or digital records.
 
You wanna proofread shit before you post? you went from baking soda to creatine.

Also why are you using examples of this stuff "say we have..." do you not have the recipe of anavar to actually post, it's not a secret that a 25mg var cap will have 25mg of var and the rest your filler.

This is how I usually explain things when I'm tutoring, just a certain way of speech. Fixed the typo, thank you for pointing it out.
 
It was a test! He didn’t super sayian blue, he went instinct!!! Guys a phoney
Only Son has instinct right now, Vegeta got blue after he trained with Whis for 6 months. No phoneys here lol

Edit: getting some food, I'm starving. I'll still check this but replies may be a little slower.
 
I wanted to get a quick reply out to you. Let me go into more detail so there is no confusion, might take me a second to write this out. It depends on my compound what ratio I will use. I've seen you on other threads so I should have taken the time to write an in-depth reply to you, but I was trying to reply to everyone and not miss new posts.

Let's just say I'm mixing up some Anavar to cap. I'll get my Var and I'll get my baking soda. First I'll decide my ratios. Lets say I'm doing 5mg of var for every 50mg of baking soda. So my ratio here is 5mg of var for every 50mg of baking soda. If I'm doing say, 100mg of var I will need 1000mg of baking soda.

I put all the var in my mortar and pestle. I'll add a roughly equal volume of baking soda. I mix that shit the fuck up. I'll add in more baking soda equal to the volume of the total mix. I'll stir it the fuck up. Repeat this process.

This is not any process for geometric dilution, I don’t think you understand the process. How the hell does grinding powder together with a mortar and pestle ensure even distribution of an API?

You need a pharmaceutical mixer...
You could construct a v blender out of material from a home renovation supply store if you are unable to purchase a v blender. Or use a concrete mixer for a large batches. I read on the news that drug dealers used these methods in labs that were busted. They were crude but in the end the performed the task.

Note the above methods are stated as they seem to be in the scope of your operation, I don’t endorse this for any serious outfit.
 
Since you have read my previous post and said you will be doing the same way of pressing your caps.

What is your recipe using baking soda on your anavar tabs?
 
I wanted to get a quick reply out to you. Let me go into more detail so there is no confusion, might take me a second to write this out. It depends on my compound what ratio I will use. I've seen you on other threads so I should have taken the time to write an in-depth reply to you, but I was trying to reply to everyone and not miss new posts.

Let's just say I'm mixing up some Anavar to cap. I'll get my Var and I'll get my baking soda. First I'll decide my ratios. Lets say I'm doing 5mg of var for every 50mg of baking soda. So my ratio here is 5mg of var for every 50mg of baking soda. If I'm doing say, 100mg of var I will need 1000mg of baking soda.

I put all the var in my mortar and pestle. I'll add a roughly equal volume of baking soda. I mix that shit the fuck up. I'll add in more baking soda equal to the volume of the total mix. I'll stir it the fuck up. Repeat this process.
I personally question if you really use or even possess a mortar & pestle, since you obviously came here prepared and know @Mighty-mouse would drill you on this, or are you just saying you do? Correct me if I’m mistaken, but I don’t see it in your pics. Mind posting it with the crumpled paper & Meso and today’s date?
 
Since you have read my previous post and said you will be doing the same way of pressing your caps.

What is your recipe using baking soda on your anavar tabs?

Sorry, I went out to eat. 2.5g of var, 106.5 g of baking soda.

Was just checking.... had to make sure. And I was referring to his 2nd blue forum. I’m gonna require you to re-watch the entire series

Lol, new episode is coming out tonight iirc.

I personally question if you really use or even possess a mortar & pestle, since you obviously came here prepared and know @Mighty-mouse would drill you on this, or are you just saying you do? Correct me if I’m mistaken, but I don’t see it in your pics. Mind posting it with the crumpled paper & Meso and today’s date?

Absolutely, I'm getting my check now and then leaving this restaurant, give me 20 minutes or so, I'll head there now and snap a picture for you.
 
So perhaps I should have clarified. I have raws batch 0. I sent this off for testing, and brewed this. I set aside some leftover raws for myself, brewed that and took a picture. The brew from raws batch 0 is what I will be selling, and I'm hoping Jano will soon receive my shipment and send results back asap. I have already ordered another raws batch that is coming. This will be batch 1. I will ALSO test this batch and then brew it and sell it.


All new capsules are capped according to how mightmouse mentioned to Olympia Labs in his intro thread, yes. I would be more than happy to do it step by step along with pictures, I honestly did not think to include that.

Direct quote from mightymouse on olympias thread:

" Load all 100 caps and use your tamping tool if you do when pressing

Now the fun part

Empty all baking soda and measure it (say it’s 41,500mg)

Divide that by the 100 = 415mg of BS per cap

Now you have to fill all caps with active ingredient only and use the tamping tool as well

Empty and weigh again (say it’s 22,500mg)- this is why no one does this.

Divide that by 100 = 225mg of active per cap (this will be different for every compound)

Now you figure out the ratio of active to baking soda

25mg active = unknown mg of BS

225mg of active = 415mg of BS

So the formula is
(25mg active * 415mg BS) / 225mg active = 46.11 of baking soda (this is the unknown stated above and how much needs to be removed per pill to make room for 25mg of active.)

415mg baking soda minis 46 = 368 mg of baking soda each cap

Then of course 2500mg of active

So you will need 36,800mg of baking soda and 2500mg of active to successfully make this batch.

When I say active it could be anything but not talking any particular active ingredient. "

And of course, grinding the active with mortar and pestle before mixing.

How many mg of total filler + api does each of your capsules hold?
 
I personally question if you really use or even possess a mortar & pestle, since you obviously came here prepared and know @Mighty-mouse would drill you on this, or are you just saying you do? Correct me if I’m mistaken, but I don’t see it in your pics. Mind posting it with the crumpled paper & Meso and today’s date?

Give me 20..... maybe 5 min and I will be back to the old self582950217.058542public.jpg
 
In your poll above, you’re offering pics of this chicks face.

If you do so, you’ve lost me as ever being a potential customer even if you do make it here. It wouldn’t be hard to track her identity and then track you. Not a smart move for a drug peddler..
 
Back
Top