MESO-Rx

Anabolic Steroids

Saiyan Labs (US Domestic)

The next nude should be:

  • Front pic with her face and pussy

    Votes: 26 38.2%

  • Back pic with her bare ass bent over

    Votes: 36 52.9%

  • Fron pic of her boobs and face, holding a sign with a random posters handle

    Votes: 6 8.8%
  • Total voters
    68
  • Poll closed .
So I'm going to throw some stuff at the wall and see what sticks. Dude is in college, or very recently out, hence the study day with some random chick. The equipment looks like stuff you'd find in a college lab so he's either using the lab, borrowed the equipment, or bought the same stuff he was used to using in college, right down to the buchner funnel and filters used to basic experiments.

Edit: also setting aside time to be available on friday, busy studying/tutoring on saturday and unavailable all day monday. I'd imagine if this continued we'd see some similarity between his presence here and some jam packed summer class schedule since summer courses are usually condensed for time.
 
Last edited:
mp46 said:
I knew something wasn't right when I saw the buchner funnel in the first post, there's no seal for the funnel and filter so the product can even slide past the filter. That's why I asked for filter setup a while ago and he said he posted it, but I forgot to check up on it. I remembered this morning and couldn't find any newer photos so I asked again, and here we are.

So yea, I would never buy from this guy, he's been fucking up his home brew and putting himself in danger this whole time then decided to source.

I don't expect him to ever show up again in this thread, but on a personal note Sayian, dump all of your personal gear and start over. last thing you need is an abscess or infection from this shit. No one cares how long you've been doing it like this, you'll eventually get a bad pin and fuck yourself up.
Click to expand...

I'm either the stupidest person alive, or the luckiest; probably both honestly. I've dumped everything that has been brewed so far, and I have the correct filters coming in asap. I've also put in an order for larger equipment capable for sterilizing my erlenmeyer flasks. Thankfully I only brewed a small amount of the raws I have on hand, but this is still definitely one of the most expensive lessons I've had to learn. Expect a slightly more optimistic update in a day or so, and new tests from Jano and W&M in the future. The anabolic lab donation will come at the same time I mentioned in the OP.

20190624_192223.jpg
 
SaiyanLabs said:
I'm either the stupidest person alive, or the luckiest; probably both honestly. I've dumped everything that has been brewed so far, and I have the correct filters coming in asap. I've also put in an order for larger equipment capable for sterilizing my erlenmeyer flasks. Thankfully I only brewed a small amount of the raws I have on hand, but this is still definitely one of the most expensive lessons I've had to learn. Expect a slightly more optimistic update in a day or so, and new tests from Jano and W&M in the future. The anabolic lab donation will come at the same time I mentioned in the OP.

View attachment 114311
Click to expand...
Bruh you got much stuff to learn..dont throw money until you learn . And ffs show some responsibility. The stuff you could sell may have some dude amputated. Go find a normal work. This shit is not for you. And i lurk on many forums so i hope you don't try to sell this poison on other less knowledgeable forums. Once again meso proves its the best and i am grateful guys like @mp46 take care if the meso family. Props to you, you got my respect!
 
SaiyanLabs said:
Not going to quote you, since so many people were tagged. No one has received anything yet since yesterday was sunday and today is monday. Going to stop taking orders for now until I can confirm what you're saying. I'll update when I have more information.
Click to expand...
You said you were hoping to follow TGI’s footsteps. Big difference - he knew what he was doing before he came here... he just had limited stock. You need to close up shop and take a minute to learn how to brew and mix hormone and fillers. Sorry man, but you’re a danger to everyone here.
 
This is why I have a problem with people who feel brewing is something any monkey should do and it's nothing more than a step to save money.

There are some people in this world who even if they have the right training, shouldn't work certain jobs. You wouldn't want a bumbling fool working with electricity or working with heights or operating heavy machinery. You also wouldn't want a drooling idiot who can't do basic math working in the finance industry.

Somehow any mongoloid idiot is fair game to brew drugs for I.M injection though.

A good experienced brewer has more knowledge and efficiency in his setup, you're not going to get that by reading reddit posts on home-brewing like OP here, a lot of it is homegrown knowledge from years of experience. The best people aren't exactly sharing their tech in the open, go figure.

The point is, this guy probably isn't that kind of brewer if he can't even order the right filter.
 
@SaiyanLabs Consider this a wake up call: you probably aren't meant to brew drugs for other people to inject, at least not with any safety.

The good news is you can actually spend your time doing something worthwhile instead.

Just be grateful no one got hurt with unsterile product, and move on. I refuse to believe any living creature has a ego big enough to allow them to attempt a come-back after such a colossal fuck up.
 
mp46 said:
So I'm going to throw some stuff at the wall and see what sticks. Dude is in college, or very recently out, hence the study day with some random chick. The equipment looks like stuff you'd find in a college lab so he's either using the lab, borrowed the equipment, or bought the same stuff he was used to using in college, right down to the buchner funnel and filters used to basic experiments.

Edit: also setting aside time to be available on friday, busy studying/tutoring on saturday and unavailable all day monday. I'd imagine if this continued we'd see some similarity between his presence here and some jam packed summer class schedule since summer courses are usually condensed for time.
Click to expand...

I agree that he is definitely a college student. A reminder that an undergraduate education in anything, even a related field, is not going to equip you with the knowledge to do this safely. And you can't fill in the gaps by reading brewing tutorials on reddit either.

I thought people joked when they said the value of a western education is worthless. Apparently it's not a joke, jesus fucking christ.

Here's something to consider: even though the information is not readily available, you can technically learn a lot of what you need to know about the brewing process with the information that is available via textbooks and other resources in chemistry, pharmaceutical sciences and other fields (real information, not garbage forum threads by other idiots).

What you won't find available is how to handle the "business" and "security" side of something like this. No one in the know is going to publicly share any of that.

If OP is this clueless about the most basic part of the operation, imagine the disaster that awaits him on the other side of the business.
 
What angers me a bit tbh is how lightly it was taken from him at first, ok let's crack a few jokes and start selling test. Easy right? Then a person gets an infection, loses part if his glute, leg or even dies. Still funny?
 
Damn, that's a big miss.

I don't brew and I know which filters to use just browsing the HB section. Hell, I'm pretty confident that I could if I wanted to.

I've...brewed, prepped, and refined a lot of different substances for consumption in my day.

But that .01% doubt keeps me from setting up a little lab in this case. Serious game you're playing.
 
Wow, and this is why I read as much of a thread as i can before i decide to buy anything. I do not feel like losing an ass cheek just to inject some test!!!
 
LeoTC said:
For what it's worth, I use a pressure cooker to sterilize substraights and jars for mushroom grows.

The mycelium being particularly sensitive to bacteria, improper sterilization will kill a colony.

While my procedure is the same every time, I'll still lose a colony from time to time. At a high enough rate that I'd not trust it to steralize anything being injected into the body.

Unlike mushrooms, there are zero physical indicators of contamination.

Just saying, go with the autoclave. Even if it means putting off opening shop while you save for it. If you're serious, it's worth taking the safety of potential customers seriously.

I know I put my well being above my source's pocket book.

Ya'know?
Click to expand...
@LeoTC my man, Lmao. right there with you buddy. its been a while but need to get back to it.
 
You must log in or register to reply here.

Similar threads

Venom Lab
Venom Lab Boutique - AAS - HGH and Peptides - EU Domestic
33 34 35
Replies
687
Views
57K
Venom Lab
Venom Lab
Defiant Pharma
Defiant Pharma (US Domestic)
76 77 78
Replies
2K
Views
93K
Defiant Pharma
Defiant Pharma
OEP LABS
OEP LABS Domestic
280 281 282
Replies
6K
Views
271K
ZaddyZonar
Z
A
WWB & BBA Testing Groups - Oils, Orals, Peps
5 6 7
Replies
137
Views
10K
bate
B
P
Restoring the churchbells for a important mission
Replies
8
Views
212
Wildcard781
Wildcard781

Sponsors

Latest posts

Back
Top