Can B Vitamin Injections Be Dangerous?

[Date_Mike]

Yeah it seems that some get away with no buffering... I think it comes down to the raws used and what ever combination is being done.
A Ph above 7 is usually targeted and this is accomplished by the addition of baking soda. You basically measure the finished brew( before filtering ofcourse) and if PH is below 7 you add Baking soda bit by bit until you get A pH you are happy with.,... some experimentation is required.... for example I get PIP if PH is around 7 but at 9 I get no PIP

Oh and also I am talking about Carnitine base here as the raw powder not tartrate etc.

And again I have to mention that all this goes out the window when adding a bunch of other stuff like choline inositol etc I have not researched this nor have I experimented with it. Planning to but need to find out what forms of the raws work best for injections... there are 9 kinds of inositol for example,,,

The inositol is the vitamin B version. Thank you for expanding

 

[razter]

Yeah it seems that some get away with no buffering... I think it comes down to the raws used and what ever combination is being done.
A Ph above 7 is usually targeted and this is accomplished by the addition of baking soda. You basically measure the finished brew( before filtering ofcourse) and if PH is below 7 you add Baking soda bit by bit until you get A pH you are happy with.,... some experimentation is required.... for example I get PIP if PH is around 7 but at 9 I get no PIP

Oh and also I am talking about Carnitine base here as the raw powder not tartrate etc.

And again I have to mention that all this goes out the window when adding a bunch of other stuff like choline inositol etc I have not researched this nor have I experimented with it. Planning to but need to find out what forms of the raws work best for injections... there are 9 kinds of inositol for example,,,

Thanks for that info. I've always bought Synthetine and never had any issues or pip. I'd like to be able to make it just as smooth.

I have the carnitine base powder, which I got from bulk supplements. To test the ph, are you just putting a few drops on a ph strip?

I'm just making it with the carnitine for now. I will do the MIC, B12, and other B's later. I need to start somewhere. I may even try to do those separately before I combine. Step one is the carnitine. First I have to find these filters though. The one recommended on the video is out of stock where he got it and some other one's I'm seeing recommended aren't sterile.

 

[29trt]

Thanks for that info. I've always bought Synthetine and never had any issues or pip. I'd like to be able to make it just as smooth.

I have the carnitine base powder, which I got from bulk supplements. To test the ph, are you just putting a few drops on a ph strip?

I'm just making it with the carnitine for now. I will do the MIC, B12, and other B's later. I need to start somewhere. I may even try to do those separately before I combine. Step one is the carnitine. First I have to find these filters though. The one recommended on the video is out of stock where he got it and some other one's I'm seeing recommended aren't sterile.

yes PH strip or Ph meter whatever you have available

 

[razter]

yes PH strip or Ph meter whatever you have available

Thanks. I found the filters too.

 

[razter]

Can someone please explain how to figure out the mg/ml? What are the calculations to use? I have everything I need, but was thinking I may make an adjustment to the dosage. Thank You!

 

[Date_Mike]

Can someone please explain how to figure out the mg/ml? What are the calculations to use? I have everything I need, but was thinking I may make an adjustment to the dosage. Thank You!

…. It is milligram per milliliter…. That’s the calculation

 

[razter]

10 g L-Carnitine
12.5 ml BAC
10000/12.5=800
but actually we are dividing it by 20ml because that gives us the 500mg/ml.

I guess I'm really trying to figure out many ml's the L-Carnitine is once it's dissolved. I would have the amount of BAC used + ? Correct?

Does each g of L-Carnitine equal an additional 0.75ml?
I'm getting that by..
makes 20ml, I added 12.5 BAC, so there is a 7.5 difference. Diving the difference 7.5ml by 10g gives me an additional 0.75ml/g.

So for every g of L-Carnitine I add or subtract, it would add or reduce my ml volume by 7.5ml.

Does that make sense?

 

[Date_Mike]

10 g L-Carnitine
12.5 ml BAC
10000/12.5=800
but actually we are dividing it by 20ml because that gives us the 500mg/ml.

I guess I'm really trying to figure out many ml's the L-Carnitine is once it's dissolved. I would have the amount of BAC used + ? Correct?

Does each g of L-Carnitine equal an additional 0.75ml?
I'm getting that by..
makes 20ml, I added 12.5 BAC, so there is a 7.5 difference. Diving the difference 7.5ml by 10g gives me an additional 0.75ml/g.

So for every g of L-Carnitine I add or subtract, it would add or reduce my ml volume by 7.5ml.

Does that make sense?

what you’re talking about sounds like displacement factor. It is roughly 0.8 doing the math. Each g displaces 0.8 ml

 

[razter]

what you’re talking about sounds like displacement factor. It is roughly 0.8 doing the math. Each g displaces 0.8 ml

Thank You!!! That's what I was missing. Appreciate it!

 

[Date_Mike]

Thank You!!! That's what I was missing. Appreciate it!

Yup but remember there is a staturation point for any solvent

 

[razter]

Yup but remember there is a staturation point for any solvent

I wasn't worried about that with this because I was thinking of making it weaker. I do believe I reached that saturation point with a peptide though.

 

[Meowmeow83]

Pure bulk.

I use choline l-bitartrate because that’s all they have. Most recipes I’ve found use Choline Chloride. From what I’ve found researching- no difference.

So I tried to do MiC in a homebrew and for some reason I couldn’t get it to get into solution- I can do L Carm and Glutathione- but MIC isn’t going in.
I use pure bulk as well
Did I get the right ones?
I got the same choline as you
Inositol Hexanicotinate
L-Methionine

Any insight would be great- my next step was to try to heat it into solution