MESO-Rx Sponsor Primal Pharma - US Domestic

[Primal_Pharma]

I was excited for a new source but bummer you are just glossing over these. Honestly it looks worse than giving a poor answer. Les marketing more substance.

Brother, we came out the gate with 60 tests...

 

[Primal_Pharma]

Want to know which solvents and products use GUC? Take a look!

View attachment 336019

We want to make it absolutely clear that Primal Pharma is an independent operation and not affiliated with any other source, group, or distributor, past or present. Everything we produce, every order we fulfill, and every standard we uphold is done entirely in-house and on our own terms.

 

[accidentaljedi173]

We want to make it absolutely clear that Primal Pharma is an independent operation and not affiliated with any other source, group, or distributor, past or present. Everything we produce, every order we fulfill, and every standard we uphold is done entirely in-house and on our own terms.

So let's see the setup, with a crumpled piece of paper with meso and the date on it of course.

 

[newguy2]

Brother, we came out the gate with 60 tests...

You did, but Readalot shared some good examples of reputable sources sharing their sterilization and brewing procedures. Tests only tell a part of the picture.

 

[pewex]

We want to make it absolutely clear that Primal Pharma is an independent operation and not affiliated with any other source, group, or distributor, past or present. Everything we produce, every order we fulfill, and every standard we uphold is done entirely in-house and on our own terms.

It's all just one big conspiracy and pure luck that you're using the same solvents, products, dosages, and even the same tablets .

 

[DinoBB76]

musclecandy same products lol

 

[Primal_Pharma]

It's all just one big conspiracy and pure luck that you're using the same solvents, products, dosages, and even the same tablets .

If you take a closer look at the verified sources across the forums, you’ll notice that most are following a very similar formula and for good reason. There’s a proven playbook in this industry when it comes to what works: trusted solvents, standard dosages, reliable caps and vials, and streamlined processes that ensure consistency and safety. When done correctly, there’s not a lot of room (or reason) to reinvent the wheel. Quality often comes from doing the fundamentals right and doing them without cutting corners.

Vegan capsules have become more or less the standard at this point, unless someone is going the traditional pill press route, which is increasingly rare in this space. So while the labels might be different, the core components are often strikingly similar. What truly sets a source apart isn’t just what’s in the vial, it’s the consistency, transparency, quality control, and the people behind the scenes making it all happen.

One key difference that we take pride in is our commitment to reliability. We’re not going to vanish without notice or take sudden, unexplained breaks. We’ve seen it happen time and time again, and we understand how frustrating that can be for customers. At Primal Pharma, we’re here for the long haul—with no disappearing acts, no surprises, and no excuses. You can count on us to be consistent, responsive, and present—day in and day out.

 

[Whistles77]

Write me a forum post for an AAS vendor being pushed by internet users to be transparent about the formulation of our oils. Make it empathetic and reflective of us doing the same thing as others

ChatGPT said:​

Sure — here’s a forum-ready post written in an authentic, empathetic tone that strikes a balance between transparency, professionalism, and peer-level relatability. It’s designed to sound human, not corporate or polished like AI.

---

Title: On Transparency and Formulations — A Quick Word from Our Side

Hey everyone,

We’ve seen a few posts and DMs recently asking for more transparency around our oil formulations — totally fair, and we appreciate the push. This community has every right to ask questions, especially when it comes to what you're putting in your body. So here's a straight answer.

We're not doing anything groundbreaking or proprietary behind the scenes. The reality is: the vast majority of reliable sources are working off the same foundation — tried-and-true compounds, tested raw suppliers, standard solvents (MCT or GSO), with BA/BB percentages that fall within well-established safe ranges. It’s not rocket science, and it's not meant to be. Good gear comes from consistency, not from trying to be clever.

We’ve chosen to stay quiet on certain formulation specifics not out of secrecy, but because we didn’t want to come off as marketing fluff. But if transparency builds trust, we’re all for it. So here’s the general breakdown of what we use:

• Carrier: primarily filtered MCT, sometimes GSO for longer esters
• Solvents: 2% BA / 18% BB max (less if the compound allows)
• Filtering: 0.22μm sterile syringe filtration under positive pressure, no shortcuts
• Vials, stoppers, caps: all sterilized in-house — dry heat/autoclave

We're not here to reinvent the wheel. We just want to do it right, keep things consistent, and be present when people have questions — not vanish when the heat comes. We’ve been watching how things work in this space for years. The brands that last are the ones that stay accountable and don’t cut corners.

If you ever want clarification on anything we do — reach out. No drama, no defensiveness. We’re open to critique when it’s constructive, and we respect anyone who’s been around long enough to ask the right questions.

Thanks to everyone who’s supported us so far — seriously.

— [Your Brand Name or Team Name]

 

[readalot]

We are entering with a clear purpose: to set a higher standard and lead the way in performance supplementation. We are not here to follow trends. We are here to redefine them. Our approach is anchored in uncompromising quality, complete transparency, and an unrelenting drive to elevate expectations at every level. From day one, our commitment has been to earn your trust by delivering consistent, measurable results and standing behind every product we create. We don’t just aim to participate in this space—we intend to set the pace and become the benchmark by which others are measured.

If you take a closer look at the verified sources across the forums, you’ll notice that most are following a very similar formula and for good reason. There’s a proven playbook in this industry when it comes to what works: trusted solvents, standard dosages, reliable caps and vials, and streamlined processes that ensure consistency and safety. When done correctly, there’s not a lot of room (or reason) to reinvent the wheel. Quality often comes from doing the fundamentals right and doing them without cutting corners.

So which one is it? I am confused.

 

[verylargeshoes]

One key difference that we take pride in is our commitment to reliability. We’re not going to vanish without notice or take sudden, unexplained breaks. We’ve seen it happen time and time again, and we understand how frustrating that can be for customers. At Primal Pharma, we’re here for the long haul—with no disappearing acts, no surprises, and no excuses. You can count on us to be consistent, responsive, and present—day in and day out.

Okay, that’s great. How are you going to do that? Do you have multiple production facilities? Multiple people trained in each role? Authorities on the payroll?

I’m sure that if the business is profitable you’ll Try Real Hard to keep it going. Gotta pay that note on the Lambo. But shit happens.

Honestly, you’re better off not making promises like this. You’ve got zero track record to point to, and no explanation for why this is a credible promise. Stop writing your own Yelp reviews. Make some happy customers and let them do it.

This all feels like the shit I told my high school girlfriend to get her into bed. “We’ll be together forever, baby. I’m not like those other guys.”

 

[Bandern]

If you take a closer look at the verified sources across the forums, you’ll notice that most are following a very similar formula and for good reason. There’s a proven playbook in this industry when it comes to what works: trusted solvents, standard dosages, reliable caps and vials, and streamlined processes that ensure consistency and safety. When done correctly, there’s not a lot of room (or reason) to reinvent the wheel. Quality often comes from doing the fundamentals right and doing them without cutting corners.

Vegan capsules have become more or less the standard at this point, unless someone is going the traditional pill press route, which is increasingly rare in this space. So while the labels might be different, the core components are often strikingly similar. What truly sets a source apart isn’t just what’s in the vial, it’s the consistency, transparency, quality control, and the people behind the scenes making it all happen.

One key difference that we take pride in is our commitment to reliability. We’re not going to vanish without notice or take sudden, unexplained breaks. We’ve seen it happen time and time again, and we understand how frustrating that can be for customers. At Primal Pharma, we’re here for the long haul—with no disappearing acts, no surprises, and no excuses. You can count on us to be consistent, responsive, and present—day in and day out.

Don’t care didn’t ask will ur steroids raise my bowling average (non drug tested federation)

 

[readalot]

Test E 500mg

Test C 400mg

Test Sust 500mg

Tren E 400mg

Test C 400? Hmmm. The C stands for crashed.

Please be prepared to list all the ingredients in your oils.

We typically formulate our oils using 20% Benzyl Benzoate (BB) and 2% Benzyl Alcohol (BA), which we’ve found to be an ideal balance for maintaining both stability and smoothness in most compounds. This ratio ensures proper solubility, minimizes post-injection discomfort, and supports long-term preservation of the product.

That said, for certain higher-concentration oils where additional solvent support is needed, we may slightly adjust the ratios to maintain consistency and avoid crystallization—always with user comfort and safety in mind.

Disclose excipients. Quantify the term "solvent support" per product.

You've also flat out ignored the raws testing questions.

You are here to (A) redefine the standard for sources or (B) not reinvent the wheel? Which one? Reads like you don't know. Let us know when you figure it out.

 

[readalot]

See post #419 to #503 of this thread for what I consider to be a thoughtful, insightful exchange re: raws testing.

Post in thread 'MuscleCandy - US Domestic'

Nov 14, 2024

How come your mast is off by 6.97% is this acceptable? Just genuinely curious. I know 10% is the standard but you are okay with this?

Bro because they dont test raws or they buy finished oils. They always come with test that are off just like axle.

• FastBun

• 

 

[Anonymous member 154437]

Gotta pay that note on the Lambo.

There’s no note on a rental. I want to see two keys posted up or a pic of the dash. Bet that thing has over 50k miles on it

 

[Primal_Pharma]

There’s no note on a rental. I want to see two keys posted up or a pic of the dash. Bet that thing has over 50k miles on it

Blessed is BLESSED!!

Write me a forum post for an AAS vendor being pushed by internet users to be transparent about the formulation of our oils. Make it empathetic and reflective of us doing the same thing as others

ChatGPT said:​

Sure — here’s a forum-ready post written in an authentic, empathetic tone that strikes a balance between transparency, professionalism, and peer-level relatability. It’s designed to sound human, not corporate or polished like AI.

---

Title: On Transparency and Formulations — A Quick Word from Our Side

Hey everyone,

We’ve seen a few posts and DMs recently asking for more transparency around our oil formulations — totally fair, and we appreciate the push. This community has every right to ask questions, especially when it comes to what you're putting in your body. So here's a straight answer.

We're not doing anything groundbreaking or proprietary behind the scenes. The reality is: the vast majority of reliable sources are working off the same foundation — tried-and-true compounds, tested raw suppliers, standard solvents (MCT or GSO), with BA/BB percentages that fall within well-established safe ranges. It’s not rocket science, and it's not meant to be. Good gear comes from consistency, not from trying to be clever.

We’ve chosen to stay quiet on certain formulation specifics not out of secrecy, but because we didn’t want to come off as marketing fluff. But if transparency builds trust, we’re all for it. So here’s the general breakdown of what we use:

• Carrier: primarily filtered MCT, sometimes GSO for longer esters
• Solvents: 2% BA / 18% BB max (less if the compound allows)
• Filtering: 0.22μm sterile syringe filtration under positive pressure, no shortcuts
• Vials, stoppers, caps: all sterilized in-house — dry heat/autoclave

We're not here to reinvent the wheel. We just want to do it right, keep things consistent, and be present when people have questions — not vanish when the heat comes. We’ve been watching how things work in this space for years. The brands that last are the ones that stay accountable and don’t cut corners.

If you ever want clarification on anything we do — reach out. No drama, no defensiveness. We’re open to critique when it’s constructive, and we respect anyone who’s been around long enough to ask the right questions.

Thanks to everyone who’s supported us so far — seriously.

— [Your Brand Name or Team Name]

We need to hire you as our PR guy ASAP!!

Okay, that’s great. How are you going to do that? Do you have multiple production facilities? Multiple people trained in each role? Authorities on the payroll?

I’m sure that if the business is profitable you’ll Try Real Hard to keep it going. Gotta pay that note on the Lambo. But shit happens.

Honestly, you’re better off not making promises like this. You’ve got zero track record to point to, and no explanation for why this is a credible promise. Stop writing your own Yelp reviews. Make some happy customers and let them do it.

This all feels like the shit I told my high school girlfriend to get her into bed. “We’ll be together forever, baby. I’m not like those other guys.

Try our products out and we'll be together forever baby

Don’t care didn’t ask will ur steroids raise my bowling average (non drug tested federation)

A gram of tren will raise ALL your averages brother!! At least it did on my last blood work panel...

Disclose excipients. Quantify the term "solvent support" per product.

You've also flat out ignored the raws testing questions.

You are here to (A) redefine the standard for sources or (B) not reinvent the wheel? Which one? Reads like you don't know. Let us know when you figure it out.

ReadAlot needs to ReadAlotMoreCarefully, most of your questions that weren't rhetorical were answered brother. We’re not here to reinvent the brewing process - that’s already been refined through years of trial, error, and proven methodology. Instead, we’re here to redefine what it means to be a source you can truly rely on. In this industry, consistency, transparency, and accountability matter just as much as product quality - and that’s where we intend to lead.

Meso is home to many well-established sources offering solid products, and we have a genuine respect for the groundwork they’ve laid. Their contributions have helped shape a community that holds high standards, and we’re proud to be stepping into that space.

That said, our mission goes beyond simply joining the list—we aim to set a new benchmark. Where we believe we’ll shine brightest is in customer satisfaction and overall experience. From communication and turnaround time to quality control and follow-through, every touchpoint matters to us. We’re not just another source—we’re building something dependable, consistent, and customer-first from the ground up. And we’re confident that, in time, that difference will be undeniable.

 

[FastBun]

Blessed is BLESSED!!


We need to hire you as our PR guy ASAP!!


Try our products out and we'll be together forever baby



A gram of tren will raise ALL your averages brother!! At least it did on my last blood work panel...


ReadAlot needs to ReadAlotMoreCarefully, most of your questions that weren't rhetorical were answered brother. We’re not here to reinvent the brewing process - that’s already been refined through years of trial, error, and proven methodology. Instead, we’re here to redefine what it means to be a source you can truly rely on. In this industry, consistency, transparency, and accountability matter just as much as product quality - and that’s where we intend to lead.

Meso is home to many well-established sources offering solid products, and we have a genuine respect for the groundwork they’ve laid. Their contributions have helped shape a community that holds high standards, and we’re proud to be stepping into that space.

That said, our mission goes beyond simply joining the list—we aim to set a new benchmark. Where we believe we’ll shine brightest is in customer satisfaction and overall experience. From communication and turnaround time to quality control and follow-through, every touchpoint matters to us. We’re not just another source—we’re building something dependable, consistent, and customer-first from the ground up. And we’re confident that, in time, that difference will be undeniable.

The only thing you lead at is … rebranding…. Being a snitch… being a dumbass… gtfo… trash….

 

[Flex.AF]

Blessed is BLESSED!!


We need to hire you as our PR guy ASAP!!


Try our products out and we'll be together forever baby



A gram of tren will raise ALL your averages brother!! At least it did on my last blood work panel...


ReadAlot needs to ReadAlotMoreCarefully, most of your questions that weren't rhetorical were answered brother. We’re not here to reinvent the brewing process - that’s already been refined through years of trial, error, and proven methodology. Instead, we’re here to redefine what it means to be a source you can truly rely on. In this industry, consistency, transparency, and accountability matter just as much as product quality - and that’s where we intend to lead.

Meso is home to many well-established sources offering solid products, and we have a genuine respect for the groundwork they’ve laid. Their contributions have helped shape a community that holds high standards, and we’re proud to be stepping into that space.

That said, our mission goes beyond simply joining the list—we aim to set a new benchmark. Where we believe we’ll shine brightest is in customer satisfaction and overall experience. From communication and turnaround time to quality control and follow-through, every touchpoint matters to us. We’re not just another source—we’re building something dependable, consistent, and customer-first from the ground up. And we’re confident that, in time, that difference will be undeniable.

Best source Ive ran doesnt post test results. Beyond that, they don’t allow there gear to be photographed and shared publicly. Much less a lab setup they are running. Considering the volume they move, I wouldn’t think you could even keep pace with demand without multiple people sourcing, testing, and producing for you. Just saying. I don’t think half these people are interested in the gear. Looks like they’re here indirectly marketing other labs. Saw the same bs they did with axle saying it’s the candy man over and over. Posting a lot of drama. Mentioning names that are fake or made up. I feel like indirectly accusing someone of being another lab should be a ban-able offense.

 

[FastBun]

Best source Ive ran doesnt post test results. Beyond that, they don’t allow there gear to be photographed and shared publicly. Much less a lab setup they are running. Considering the volume they move, I wouldn’t think you could even keep pace with demand without multiple people sourcing, testing, and producing for you. Just saying. I don’t think half these people are interested in the gear. Looks like they’re here indirectly marketing other labs. Saw the same bs they did with axle saying it’s the candy man over and over. Posting a lot of drama. Mentioning names that are fake or made up. I feel like indirectly accusing someone of being another lab should be a ban-able offense.

Dick riding should also be an offense worthy of a perma ban…

 

[Flex.AF]

There’s no note on a rental. I want to see two keys posted up or a pic of the dash. Bet that thing has over 50k miles on it
View attachment 336053

You need the mileage for what an investigation?
Asking for photo evidence to open a case?
Why you trying to figure out how many and what type of whips primal drives?

 

[Bandern]

Best source Ive ran doesnt post test results. Beyond that, they don’t allow there gear to be photographed and shared publicly. Much less a lab setup they are running. Considering the volume they move, I wouldn’t think you could even keep pace with demand without multiple people sourcing, testing, and producing for you. Just saying. I don’t think half these people are interested in the gear. Looks like they’re here indirectly marketing other labs. Saw the same bs they did with axle saying it’s the candy man over and over. Posting a lot of drama. Mentioning names that are fake or made up. I feel like indirectly accusing someone of being another lab should be a ban-able offense.

Cool post bro now show us your muscle candy tramp stamp